headers
-
Shorty headers for 95 350 with an nv4500
Just bought my 1st truck this weekend it’s a 95 k2500looking for a cheap set of good shorty headers, it’s a tbi 350 with an nv4500, im not sure if a mid length header would fit in these trucks or not, but eventually I’d like to build it into a 355- Warrick454
- Thread
- 350 exhaust headers small block
- Replies: 0
- Forum: Exhaust
-
S
Long tube headers for 98 c1500 5.7 vortec
So im looking at these headers https://www.jegs.com/i/JEGS/555/30066/10002/-1?_br_psugg_q=30066 does anybody know if they at least will fit and then will I just have to weld a o2 bung onto them for it to work. I really don't want to put shortys on if theirs anyway that I can make a set of long... -
Best 5.7 Vortec Long Tubes
I’m sure this has been discussed before, but I see a lot of back and forth of arguing with header recommendations on the threads, LOL. Looking to purchase a set of long tube headers for my 5.7 vortec. I will be doing an EGR delete to broaden my choices for long tubes. Obviously I can’t narrow...- 2doortahoetoby
- Thread
- exhaust headers long tube headers long tubes vortec
- Replies: 6
- Forum: Exhaust
-
8
Headers help
I have a 1989 Chevy c1500 single cab long box. I am wanting headers. I don’t know what I need to purchase for them. Is there an exhaust kit? Do I just need a new y pipe. What will I need for headers and what headers will work. Completely stock truck. I don’t know much about headers but I would...- 89c1500chevy
- Thread
- 1989 2wd 5.7 c1500 chevy exhaust system headers loud
- Replies: 5
- Forum: Exhaust
-
Square body headers on C1500 454
Has anyone had any success using square body headers on the GMT400? -
Everyone's favorite paint for making headers look good again? 89 350 crate
So the headers on my 89 350 tbi are probably 10 years old or more. Whats the most recommended paint that'll withstand that heat? Or wrap? I'm open to all suggestions. The flowmaster (Super40s I Think) are close to 20 years old so definitely wondering if I should pay the price for new true duals...- SouthernChevy74
- Thread
- flowmaster headers true dual
- Replies: 28
- Forum: Paint / Body / Detailing
-
D
O2 sensor on mid length headers
Does anyone have any experience running the stock 1 wire O2 sensor on direct fit, mid length headers? I have a hole in my cat and rotted headers, so I am replacing the stock manifolds with JBA 1830S headers and cat with a Magnaflow 23256. I saw that long tube headers or relocating the sensor... -
98 5.7L Headers - Possibly stupid questions
My truck is a 1998 K1500 5.7L, currently has stock exhaust down to the rear cats. I had to chop off the mufflers the other day because one of them blew in half, and they were both rattling. When I dropped the tailpipes to the floor a bunch of the catalyst material fell out of the mufflers, so... -
D
EGR Delete
Hey all so I got new JBA long tube headers for my 98 GMC k2500 7.4l and I brought it into the shop and was told I would need an EGR Delete. Well I can’t for the life of me find anything for my 7.4l, I can find stuff for every other but none for mine. I’m wondering if any of you can either point...- dusty_bawls44
- Thread
- 1998 454 vortech 7.4l vortec egr delete engine gmc headers k2500
- Replies: 1
- Forum: Engine Performance + Maintenance
-
Need Info on Headers
I am dropping a 69 350 Gen 1 into my 91 GMC 1500 5.7. Where do I find the right headers. -
96-00 L29 454 Headers
Hello folks, I've got a '99 K2500 with the 454 and I want to put some long-tube headers on it. I've seen sets on Summit and Jegs that say they are direct fit for my truck, but then they say they are only for up to '95. If anybody has any ideas, maybe a part number, that would be awseome. Thanks...- scons96
- Thread
- 454 96-00 headers l29
- Replies: 3
- Forum: Engine Performance + Maintenance
-
ENGINE UPGRADE
So, I am new to the forum but am needing some guidance here. I have a 1989 K1500 which I have begun tear down on. As all projects begin, I was simply planning on performing some small maintenance and keeping the truck running healthy. With all this free time I have obtained due to this virus...- Adan Benitez
- Thread
- engine swap headers k1500 l31 tune
- Replies: 17
- Forum: Engine Performance + Maintenance
-
D
Header help
Quick question, im putting a 75 350 into a 96 c1500 and im wondering which headers will fit? Currently looking at these.. https://www.summitracing.com/parts/sum-g9006/make/chevrolet Any help is appreciated!- Dan96c1500
- Thread
- 96c1500 gen1 headers
- Replies: 10
- Forum: Engine Performance + Maintenance
-
What is the best exhaust for a 92 4.3 v6?
Can y'all give me y'alls opinion on the best exhaust from headers to tips to make my v6 sound decent and keep it budget friendly I'm in high school with little money for the truck. (1992 c1500 rwd swb with a 4.3 v6 completely stock.) -
93' K1500 complete exhaust question?
I have a 1993 Chevy K1500 ext. cab short bed and want to know if anyone can suggest a good complete exhaust system from the headers back with no cats and true dual if possible? I want something that will breath really well, especially after I stroke the current 350 to a 383. Thanks!- Ian Carver
- Thread
- dual exhaust exhaust headers k1500
- Replies: 16
- Forum: Exhaust
-
F
Gibson GP113S-C
It seems like Gibson is the about the only one who makes headers for the l29. Are people happy with them? Is fitment good in a K-Series? Longevity? Plug wire issues? I need to put mufflers on when it comes out of storage. Wanting a 411 swap. Probably head gaskets due to it using...- Franksmith
- Thread
- 454 vortech 7.4l gibson gibson gp113s-c headers l29
- Replies: 1
- Forum: Exhaust
