chevy

  1. B

    Ca smog legal 383 stroker

    Anyone have some build lists for a ca smog legal 383 stroker around 400hp for a 1994 chevy k1500? What fuel system have you guys used instead of the stock tbi snd still pass smog? I know a 383 will not pass but i will simply make it visually look like the stock 350 so all that matters is that it...
  2. Cattleguy18e

    1988 Chevy R30

    Howdy, I just got an 1988 Chevy 3500 4x4 regular cab. I want to put the biggest tires and new rims on this truck but I am not sure what I can get away with. Currently 235/85/R16 tires. Any direction is greatly appreciated.
  3. rickwolhoy

    5.7 vortec random misfire HELP

    Hey all, I've been grappling with a random misfire for a while now. I have a 2000 chevy tahoe z71 with the 5.7 vortec, currently at 322k miles. About a year ago I had a bad misfire at idle on cylinder 3 and after a leak down test I found that the exhaust valve was leaking way beyond spec. I...
  4. J

    1996 4L80E P0713 Transmission fluid temp sensor problems

    I have a 1996 Chevy K3500 with the 5.7L and 4L80E I have a P0713 Code. Last weekend I dropped the pan and installed a new internal wiring harness and TFT sensor. I put it all back together and that did not solve my problem. The transmission does not shift at the correct times, but when I clear...
  5. Maui_chevyk1500

    Code 32 causing no-start & performance issues! 94 k1500 5.7

    Ok so my truck is A ‘94 Chevy k1500 5.7 auto pretty much stock. I’ll start from the first time I got the code 32 Truck would drive fine on short trips for weeks but as soon as I would take it on any drive with highway speeds for a sustained amount of time, after it was parked it would not want...
  6. W

    94 gmc grille conversion to chevy grill

    Hi all I bought a '94 silverado but someone changed the grill to a gmc version. I'd like to reconvert this to a chevy version and I found one here in Belgium. My question: can I just swap them out like that or will I need other parts to make it fit? Reason I'm asking : here in belgium it's...
  7. 8

    Headers help

    I have a 1989 Chevy c1500 single cab long box. I am wanting headers. I don’t know what I need to purchase for them. Is there an exhaust kit? Do I just need a new y pipe. What will I need for headers and what headers will work. Completely stock truck. I don’t know much about headers but I would...
    • 89c1500chevy
    • Thread
    • 1989 2wd 5.7 c1500 chevy exhaust system headers loud
    • Replies: 5
    • Forum: Exhaust
  8. S

    97 gmc door panel Exchange

    I have a 1997 gmc 1500 with a perfect interior but doors are rusted I bought Chevy doors but the door panel on the inside is gone I believe it’s a 93-95 style not completely sure my question is before I start taking everything off what year door inside panels are exchangeable for Chevy to gmc
  9. S

    Need help diagnosing blower motor problems.

    I'm getting wrapped around the axle trying to figure out why my blower motor is not working. I replaced the blower motor and resistor 2 months ago. It recently stopped working completely so I started poking around. When the 12v terminal on the motor is jumped, nothing. When the ground terminal...
  10. Jak220

    1988 Chevy Scottsdale - not sure where to start

    Hey guys, Gonna start by saying this is gonna be a lot and apologies for that but I more or less just don't know where to begin and anything that would give me a good place to start. For background - It's a short bed 4wd Scottsdale 1500, belonged to my granddad. He died of a stroke when I was...
  11. Raspi454

    These headlights any good?

    Hey there I was wondering if anyone knows anything about these headlights, I'm doing more night driving and would like to improve visibility, I don't want a light bar, and looking to replace the stock ones for a new look as well. >>Headlights<< <<Taillights>> I like these turn signal lights...
  12. Oldschool88

    1988 305 - 1995 350

    I'm new here and I have a question. I have a 1988 GMC C1500 that had a 305. I recently swapped it for a 350 out of a 1995 Chevy K1500. This is my first swap so what do I need for a wiring harness? Will the harness match up with the truck as well? And is there anything else I need to do to get it...
  13. A

    Wire diagrams

    Hi, I want to start a new proyect, and need advice on how to do it, I want to change my cluster moonie from my chevy silverado K 1990 I went to pick n pull and bhougt a used cluster with tach from a 1994 chevy.I know that the cluster are no interchangeables and need to rewire the 94 cluster...
  14. Lawrence Taylor

    89 chevy k2500 lift advice

    Hey guys. Ive a 89 k2500 Scottsdale xcab LB with tbi350, TH400, and 241c. I just ordered the rough country 3" body lift kit and was wondering if anyone had any experience with these kits? I want to be able to run 315/75r16 (roughly 35s) after the body lift but i dont know about clearance. As of...
  15. Raspi454

    99 350 vortec rough idle

    I'm not any good at diagnosis, but my 350 vortec doesn't idle nicely, cold or warm. It kinda pulses(?) or it seems like it has a cam in a way, If that makes sense. Going down the road if seems to do alright, but as soon as it idles it's not nice. What do you fellas think? IAC, tune up, something...
  16. JT_Dubz

    4x4 Wiring?

    20200825_200557 by JT_Dubz posted Aug 25, 2020 at 8:06 PM My first post here on this forum, or any forum for that matter. I recently bought a 98 k1500 z71 (my first chevy truck) off a fella, and he told me the 4x4 wasn't working because of a "wiring issue". I searched around under the truck...
  17. Hoosierlong90

    350 vortec swap

    Hey yall, Just purchased a new dressed 350 96-2000 vortec. I am putting it in a 94 K1500 that originally has 350 tbi. I want to keep the tbi and make this as simple as I can keeping all the gauges and 4l60 working. Vortec fuel pump has already been installed. I know I can either keep the carb...
  18. Hoosierlong90

    Traction bars with helper bags?

    Anyone running traction bars with helper bags? Like air lift or firestone? Building my own traction bars and iv already got bags installed. The bars will be for the wheel hop I get since I'm running 4" staggered blocks. Let me know if you have ran both! I honestly don't see and problem with it...
    • Hoosierlong90
    • Thread
    • bags chevy ladder bars lift blocks obs stance traction bars wheel hop
    • Replies: 1
    • Forum: Towing
  19. Raspi454

    Will truck doors fit on SUVs?

    I need a new driver door for my Yukon, and found one off of a Silverado. I assume they will, but is it a direct fit?
  20. Eliot Rotering

    Newer style control arms

    I have an 88 c2500 with a 4" RC lift and need to pretty much replace most of the suspension parts. Anyway, I was wondering if you could put newer style control arms from an nbs or nnbs truck. Both upper and lower of course. I found some from ksp that are made for 2011-18 trucks with a 2-4" lift...
  21. R

    1997 K1500 5.7 Vortec - Crank, no start

    Hey everyone, Looking for some help with a crank, no start. My brother and I spent the better part of the day yesterday trying to figure this out. We replaced the ignition coil, ignition control module, check for spark, checked the fuel pump, fuel pump fuse, and also spent about an hour...
  22. I

    1996 GMC Yukon 5.7 4l60e 4x4 multiple misfires but no check engine light

    I have been trying to find the cause of some performance issues. Using Dashcommand I see that most of my cylinders are having a couple misfires on my drive to work but I am not getting a check engine light. On my drive to work I got 4 misfires on cylinder 1, 1 on cylinder 2, 1 on 3, 0 on 4, 2 on...
  23. Hoosierlong90

    Like a Rock 25 Years Later..

    What's up guys? How yall doing? Not really new here but hardly ever post. Figured id feel yall in with my 94 Silverado. RC 6" Lift, 20x12 Hostiles wrapped in Nitto G2 35s. Bilsteins 5100 ran all way around and they ride like Cadillac. Regeared to 4:10, Clean for an old truck. TBI 350 still in...
  24. 92lightduty2500

    92 Chevy 3rd brake light impossible to find

    Hi i have a 1992 chevy silverado k2500 light duty (6 lug) I had purchased a led smoked third brake light on amazon that claimed it would fit a 88-98 chevy. After recieving it it looks like it would fit a 94+ chevy fine but not an 88-93. Im curious where i can find aftermarket cargo lights for...
  25. twotonetruck

    I haven't posted in a while.. Here's some more photos of my 1995 GMC C1500.

    • twotonetruck
    • Thread
    • 1995 gmc sierra c1500 350 5.7 chevrolet chevy oem stock two tone deluxe
    • Replies: 9
    • Forum: Member Trucks

Latest posts

Staff online

Members online

... and 16 more.
Total: 1,730 (members: 66, guests: 1,664)

Forum statistics

Threads
64,247
Messages
1,389,761
Members
51,235
Latest member
ggddff

Share this page

Top