4l60e

  1. B

    Cam and 411pcm swap

    I have a 97 k1500, l31 vortec motor, 4l60e, np243, 10 bolt 3.73 truck and I’m putting a used but less blown up motor in it here soon. Exact same motor but I’m looking to give this thing some more power and get that cam sound. I’m looking into a melling m-22280 cam right now and a set of .510...
  2. 106x

    factory 96 4l60 with LS swap?

    I have a 1996 c1500 2wd and I recently picked up a 5.3 out of a 05 Tahoe and did a cam and heads. I wanna use my factory 1996 4l60e with the swap, I figured I gotta get a new flex plate and a spacer, what about wiring wise?
  3. S

    U.S quick shift on my carb swapped 94 383 and 4l60E

    Hay guys, I just got a 1994 GMC k1500. it has a 383 with a 224/230 Hydraulic Flat Cam and vortec heads. it was also carb swapped, it has a AVS2 650 on it. I got it non running so I pulled the engine and did a reseal/over hall And put a new carb on it she runs good now. But my problem now it...
  4. M

    3-2 solenoid always on in 99 4l60E

    Got a slight problem- my 3-2 kickdown soleboid is always on and has been causing some non existent shifts and like pressure being diverted. At parking lot speeds (10mph) and less than 10% throttle it will go through all 4 gears- but acts like it’s in overdrive at any higher throttle. When...
  5. Angelo

    4L80E temp often getting above 220-240 when climbing long mountain grades under load. What is the heat tolerance on these and how to proceed?

    Its a 1996 k3500 cheyenne ambulance with diesel. I assume its got the 4L80E. I climbed a short hill last year and it shot up above 240 quick. I changed the fluid it was dark and lot of metal on magnet but still operating fine. This winter I let it get to 240 at least 5-10 times for up to 20...
  6. M

    Odd erratic shifts 4l60e 4x4

    Got some odd shifts occurring, thought I would ask the experts for a direction to look in. Vehicle is a 99 Sierra 1500 SLE 4x4 Currently the vehicle goes into all gear ranges manually and with ease. In D4 range it struggles to get into 2nd (high rpm) that needs me to get off the gas before it...
  7. H

    4L60E sometimes acts like it's in neutral in reverse.

    1994 Chevy Silverado Extended Cab has a problem where reverse does nothing sometimes. The only fix is changing gear, then back into reverse to work. 183k miles on the odometer, so I'm wondering if it's just time for a replacement. Also, when I replaced the pan on the transmission a few thousand...
  8. IcicleDBR

    H7B or M7B

    Clearing out our storage at work today and I found 2 brand new Tru-Cool oil coolers in their boxes. Boss said they were gonna get thrown out so I could take em. My question is should I use the M7 or the H7? I've heard the M7 is a direct fit, but seeing as I already have the larger H7 on hand...
  9. L

    1997 Chevy C1500 Transmission Pan Fitment

    I have a 1997 Chevy C1500 a entirely bone stock truck, I was interested in changing out the OEM shallow pan with a PPE extra capacity pan. I wanted to see if anyone else has done this mod to the 4L60E and if so what are things I should be mindful of.
  10. RaTT_rt

    95 4l60e not shifting after many attempts

    Hello! I am a first time poster so i apologize in advance if anything is incorrect in posting on a forum. But, I've kinda ran out of ideas on what could be causing my problems and I've spent a little over a year working on this thing on and off. It's a 95 2500 with the 5.7 and a 4l60e. The...
  11. K

    1996 GMC Sierra K1500 w/ 4L60E: Trans Cooler

    Like the title says, I've got a '96 K1500 with 4L60E and OEM tow package with the tiny OEM trans cooler. 3.73 diffs. I want to start towing a ~4500 pound travel trailer that I want to buy, but I need confirmation that my rig can handle it. I live in Phoenix, AZ. Last weekend I rented a 1300...
  12. K

    1996 K1500 GMC Sierra: Tow Upgrades?

    My K1500 is extended cab and 6.5' bed, and has the 5.7L and 4L60E (I know, I know). I also have 3.73 gearing, aftermarket 2" radiator, and OEM auxiliary radiator cooler in-line with that. I have 18" wheels and I'm upgrading the front brakes to 14" vented rotors and triple piston calipers. It...
  13. L

    Tired 4L60E advice

    Hi all. I have a '95 K1500 5.7 with the 4L60E that I have owned from new. It now has 198K miles and counting. All in all this truck has been well maintained (by myself) and had a pretty good life. It is mostly stock. The biggest problem is that I only put on about 1K miles per year since I...
  14. C

    My 4l60E slips in first but everything else is fine

    I've got a 94 Chevy k1500 with the 4l60e. I just got this truck moving. The previous owners disconnected pretty much everything to do with vacuum and electronics on this truck so I had to go through and redo everything. My issue is that the transmission slips really bad in first but the second...
  15. N

    4L60e to carbureted 383

    Sorry if this has already been posted but i couldn’t find it. But i’ve got a 383, 650 carb (Eagle rods stroker kit) and a rebuilt 4l60e with a New converter, upgraded springs, valve body, pump, sunshell, corvette servo, band, pistons, new fibers and a new shift kit built by a gm transmission...
  16. harftp

    4l60E gave out?

    Hello all, i have a 1995 gmc sierra k1500, 5.7L - 4l60E; 3.42, 10 bolt diff. i was driving on a really hot summer day, as i progressed on my drive, i started to notice my 1st gear start to shift real hard, then in 2nd gear around 40-50mph i started to feel sluggish acceleration, like if it...
  17. TheFed

    Transmission Inspection Cover Strut Rods Help??

    Hello Everyone. 1997 GMC Suburban K1500 SLT. 4l60e 2-piece bellhousing transmission with inspection cover and strut rods. I am replacing the transmission and also need to drop the oil pan in order to replace the oil pump (pickup), oil pan gasket and rear main engine seal. :help:: What tools...
  18. H

    Managing temp on 4L60E

    Friends, I picked up a 1995 Chevy K1500 last year with a bad trans. Slipped at 2nd and fluid was black. Seller apparently strained it while towing long distance with a trailer brake engaged, idk. I had the trans swapped, and seemed to go back to normal. Recently towed my travel trailer and...
  19. Ty1er

    Bellhousing Repair

    What're yalls thoughts on welding the bellhousing? Any luck? I've got two "ears" busted, i have the broken piece of one and would have to fabricate the other.
  20. MurderYurFace

    Did I just f*ck up??

    You guys, I’m panicking right now! I had my pick out & i was attempting to remove that stupid bushing that goes up in there for the filter so that I can replace that & the filter with an updated one from ac delco. Well, long story short it’s a real PIA to get out. My pick slipped & then on its...
  21. 9

    4l60e trans not shifting to 2nd in over drive but will manually.

    1994 gmc sierra c2500. Was driving to work this morning and it was driving fine. I came up to a stop light and turned then started accelerating and it wouldn't shift out of first gear rpms kept going up though. I then shifted from over drive to 2nd gear manually and it worked. Had something kind...
  22. BigTater

    Risks of driving without TPS?

    Hey guys, I have a 94 k2500 with 5.7 and 4L60E. Sat in a field for about 11 years before I rebuilt a donor engine in it and have driven about 2000 miles on the break-in. Before I got my hands on it this truck had the tbi swapped for a carb and appropriate intake (Holley 4160 and Edelbrock...
  23. O

    5.3L swap obs 4l60e shift problems

    Hey I’m looking for some guidance on my 99’ obs 2 dr Tahoe has a 5.3L from 2003 Silverado swapped in been driving for over a year but had some issues recently with the transmission(had brand used 4l60e swapped in 5000km ago with new shift solenoids put in) problem is if I shift to drive it will...
  24. P

    Bad reverse, trans swap from 1995 S10 blazer

    Let me introduce the issue, I am looking to buy a vehicle, 1995 Chevrolet K1500, regular cab, 4x4 (of course), 5.7 (350), that lost reverse. I found a transmission from 1995 because I'm aware of the changes in the years due to the sticked post about the issue. Though the transmission comes from...
  25. T

    Pre-1998 4L60E Bolts or Studs/Nuts

    Hi, this might be a dumb question but I've got a 1996 c1500 with an L31 and a 4L60E that I'm replacing with a built-transmission and am wanting to replace the bell housing bolts while I'm swapping trannys. However everywhere I look online all the replacements are bolts but all of what I pulled...
Top