Hello guys I’m in the process of switching my work truck interior to the full plastic interior and I’m having some trouble finding one of the retainer clips. I’m missing the metal retainer clip that goes on the A-Pillar up onto the roof where the headliner is. Does anyone have a link to where i...
Hello, my 97 GMC K2500 with the 5.7 vortec died when i was backing into the yard. Now it wont crank most of the time and when it does it cranks very slowly for a second or two. Any tips on diag?
Hello
I have a 1999 Chevrolet Tahoe 2 dr, 2wd, vortec 350. i have made some improvements to the engine and now i want to add a locker to the rear end, BUT i am lost! i really cant identify the rear end in this thing.
does anybody know which rear end this is? the cover says Spicer on it.
Pic...
So I recently got a 97 Silverado 2500 cab and frame and wanted to take parts from my 94 gmc 1500 (dash, engine, interior, etc) and I wanted to know if I need to change/convert the computer parts for the 94s electrical components to work in the 97 cab or if need to do some electrical work? I’m...
I have a 96 gmc 2500 single cab long bed 5.7 vortec rwd (8lug). I want to tow a Toyota t100 on a trailer. I put this combo on uhauls website and their system tells me it's a no go. But I can put a subarban 1500 or a base Yukon and it's fine. What gives?
List of things to do...
Trace short-to-ground on brake/turn signal on drivers side
Replace input shaft seal on t-case
Fix windshield leak
Tune up kit
Brake job
Change all fluids
Get rid of the awful wheels
Fuel fill hose leak
Swap bumpers
Add third row seat
Fix/replace speakers
LS swap!?!?!
Fred Williams from Dirt Every Day recently did a video reviewing a Quigley 4x4 2500 Express van with the new 2.8 Duramax & 8 speed automatic . He seemed very impressed with it's ability to move a 3/4 ton van and this made me wonder if other smaller displacement diesel swaps have ended up in the...
Has any one here boxed in there Frome 2500 extended cab
My question is do I fully weld it from start to finish or do I go 6" every 4" leaving a bit of untouched steel
And do you think it would warp welding it start to finish
Got a frustrating one here! We could really use some expert help figuring this out...
BACKGROUND:
1992 K2500 Sierra SLE 5.7l TBI w/147K miles
Bought in 2017 for son and I to have as a work and "project" truck
We have been repairing, upgrading, and restoring the usual - A/C compressor...
I ran a '69 Pontiac with a 350 "back in the day"... Learned most of what I know about old school wrenching from that car and the few that followed her.
Recently got into vintage GMC truck world with my teenage son...
We bought a "barn find" '92 K2500 and have been having fun with the basics -...
I'd like to tow a 6,880 pound travel trailer (loaded with everything its about 7,400 not including other people in the truck) and the max towing for the truck says 7500lbs which seems kind of low for a 2500. Will my truck be ok? side note for the trucks made before 95 the max towing was 8,500lbs...
I've got a 92 suburban which is 2wd, and a 94 k2500 that has a shot body and solid frame. Am I able to just slide the suburban body on the ext cab, long bed frame? Both wheelbases are 131.5 inches. I know I need to cut holes for shifter and such, but will I need custom mounts? Are the frames the...