Search results

  1. 93TL93

    Adjusting the Band on a 4L60e

    I remember my instructions telling me to turn the screw on the force motor like 1/4 turn for firmer shifts but dont remeber which way. I never did it but probably will when i drop the pan in the spring
  2. 93TL93

    Adjusting the Band on a 4L60e

    Which transgo kit did you install?
  3. 93TL93

    Adjusting the Band on a 4L60e

    That is the way mine is also. Normal driving it feels no different than stock. Wot shifts are nice and firm. I have almost 10k miles on mine no issues yet. I only have a vette servo and a spring from my superior kit installed in the servo though
  4. 93TL93

    Adjusting the Band on a 4L60e

    I believe in the transgo it has you add shims to get a firmer a shift. I put a superior kit in mine so im not sure on the transgo
  5. 93TL93

    1996 4l60e 3rd gear slipping.

    Good to see you got it back on the road
  6. 93TL93

    What size bolts for control arm?

    Get some sawzall blades made for cutting metal should help a bunch the one in your picture looks to be for wood
  7. 93TL93

    Post YOUR Favorite Picture of YOUR Truck!!!

    The photo editing helped hide most of the rust Sent from my VS980 4G using Tapatalk
  8. 93TL93

    It's spring and time for body work

    I was helping a friend with a 2000 s10 which had a few bubbles nothing that looked bad started removing the paint and the whole wheel well crumbled into pieces ended up needing a whole panel. Sent from my VS980 4G using Tapatalk
  9. 93TL93

    It's spring and time for body work

    I guess I just didn't want to believe all this repair was needed. I should of know you see it on the surface then there is a bunch once you start cutting it up Sent from my VS980 4G using Tapatalk
  10. 93TL93

    It's spring and time for body work

    I guess your guys definition of bad is a little different than mine because this is I what I'm used to This is just sickening Sent from my VS980 4G using Tapatalk
  11. 93TL93

    It's spring and time for body work

    I wasn't questioning that you have done repair. Its just I don't think it will be unsafe when the rocker is patched. The passenger side is the worst and the only one I took a picture of it was almost identical to the drivers side before winter. Driver side Sent from my VS980 4G using Tapatalk
  12. 93TL93

    It's spring and time for body work

    This truck is structurally fine all body mounts are in tact. I'm not trying to make this into a show vehicle. Its a 21 year old truck from Ohio which I believe this truck is in much better condition then others around here that have not had work done. I don't feel attempting to make this truck...
  13. 93TL93

    It's spring and time for body work

    I have a flux core welder which I can change into a mig just need to buy the conversion kit which I heard are garbage for my welder. My body work skills are not the best. I work on cars for a living but not in a body shop. Its just something I have not done much of and I can use this truck as...
  14. 93TL93

    It's spring and time for body work

    I was just looking to help it out some it is my dd and has 247k miles on it only paid 1500 for it just rebuilt the trans 1.1k ago. Also it Is the heavy half which i found out after i bought it seen the 14 bolt when I crawled under it then checked the rpo. Got a little off track there. But it...
  15. 93TL93

    It's spring and time for body work

    I figured I would get some ideas on what to do to my truck. First here is the issues. Passenger side Driver side What I was thinking is fix the cab corners and the bed rails paint them both with black rhino liner. Put fender flares over the wheel wells for now. I was...
  16. 93TL93

    1996 4l60e 3rd gear slipping.

    Yeah, have you gotten them return springs out yet? Sent from my VS980 4G using Tapatalk
  17. 93TL93

    Few questions about rebuilding 4l60e

    If u would like to txt me questions pm me for number as I don't check the forum often Sent from my VS980 4G using Tapatalk
  18. 93TL93

    1996 4l60e 3rd gear slipping.

    I don't see anything but it's difficult to inspect from pictures Sent from my VS980 4G using Tapatalk
  19. 93TL93

    Few questions about rebuilding 4l60e

    A pick Is very usefull. Sockets, a notched straight screwdriver. Some way to depress the return springs I used a some homemade contraptions. Any other questions feel free to ask. Sent from my VS980 4G using Tapatalk
  20. 93TL93

    Has issues shifting into overdrive 4l60e

    Has it always done it after you went through puddle or is it random.
  21. 93TL93

    Has issues shifting into overdrive 4l60e

    Water possibly in the transmission connector. TPS maybe. Im not sure on this one one just some ideas.
  22. 93TL93

    Few questions about rebuilding 4l60e

    yeah the steel/friction combination they sent would of never worked it may have worked with a thinner backing plate and stepped plate but if that is the case why wasn't that included in my 500 dollar kit. yeah i did a complete rebuild my first one hope it last another 246k haha it as of now has...
  23. 93TL93

    Few questions about rebuilding 4l60e

    alright figured i give an update when i was installing the trans a week ago noticed the wiring harness was broke called monster they sent another one. so yesterday i install the harness and test drive it. shifts into every gear very nice. also so information on them 3/4 clutches i ended up...
  24. 93TL93

    1996 4l60e 3rd gear slipping.

    this might help with identifying one also https://www.novak-adapt.com/knowledge/4l60e.htm
  25. 93TL93

    1996 4l60e 3rd gear slipping.

    i can across this in identifying by sticker http://ls1tech.com/forums/automatic-transmission/1219176-4l60e-4l80e-tag-id-year-make-model-came-out.html but the one in the craigslist ad where the sticker is they put the good wrench sticker unless that is the code spray painted on the side in...

Latest posts

Members online

Total: 1,426 (members: 45, guests: 1,381)

Forum statistics

Threads
64,249
Messages
1,389,877
Members
51,244
Latest member
Red93k1500

Share this page

Top