Search results

  1. 99'Subourbon

    Pad/Compound Suggestions

    I have a HF DA polisher, never used it nor do I have any pads, polishes, compounds, etc. Looking for suggestions for some decent but cheap (yeah I know... pick 2) detailing supplies to get. I'm not looking for professional/showroom results, just better than your typical auto car wash and hand...
  2. 99'Subourbon

    Nerf Bars/Step Sides, Pics and Opinions

    Hey everyone, I'm looking to grab some side steps, and I've seen quite a variety of position, hang, diameter, etc. I'd prefer to get n-fabs, but I just can't justify the cost right now. I'd like to see some pics and the brand that they are, frame mount or body mount. Thanks!
  3. 99'Subourbon

    Torsion Bar Part #s

    Can anyone tell me what part numbers I should be looking for? It appears all GM torsion bars are used by trucks of all makes/years? Somewhere I read that OBS 1/2 tons use GL bars? GMPD gives me 3 different part numbers for my truck, but doesn't specify which side or the code: 19330057 19330059...
  4. 99'Subourbon

    Cold side piping on LS Swap

    Hey guys, Anyone have any pictures, or threads, or info, on routing that works for the cold side piping and intercooler for a turbo 4.8/5.3 swap? Plans are in the works!
  5. 99'Subourbon

    Forward planning... Auto to manual swap questions.

    This is just to have some hindsight for whenever I do land another project vehicle. Ideally I'll find myself in a 5sp manual, but they are rare around here. If I end up in a auto, I need to know my options. Straight out the door, this won't be a daily, and it will be getting a tremec tko 600...
  6. 99'Subourbon

    Tahoe/Suburban AC Control Unit 96+

    As the title states. Let me know - thanks. Sent from my HTC6525LVW using Tapatalk
  7. 99'Subourbon

    Pig Tail for Door Jamb Switch

    Anybody know the type of connector, or where I can find a pigtail, for the door jamb switch? Part # AC Delco D6066 It's a 3 blade pin male. Thanks. Sent from my HTC6525LVW using Tapatalk
  8. 99'Subourbon

    Help with rear Ride Quality

    So I brought this up in my build thread, but thought I'd post this here to as I'd really like to start addressing it asap. The rear of my truck rides like it's on bricks, with no shocks and no springs - no exaggeration. This is both prior to and after the lift, and all I'm currently running is...
  9. 99'Subourbon

    Small-port Bowtie Iron Heads - Intake Manifold

    Quick question, Will the stock chitty intake manifold fit onto the bowtie iron heads?
  10. 99'Subourbon

    How the hell?

    This is all I have left on my lift... How the hell am I supposed to get these through? Getting them out of the stock shocks was a b!tch. They are the rear shocks.
  11. 99'Subourbon

    Lift Install Help: Superlift (Inner Tie Rod End)

    The superlift install instructions advise you to drop the front hub assemblies as 1 unit. To do so, you disconnect the Brake Line, the CV Axle form the differential, and then the Inner Tie Rod Ends. Easy enough... except the inner tie rod ends. Even with the removal tool, there isn't enough room...
  12. 99'Subourbon

    Axle Shims: 4" Shackle Flip 1" Zero Rate AAL

    Hey everyone, I know this is a reach, but, does anyone have experience with the 4" ORD shackle flips, and 1" Zero Rate AAL? I'm using those to lift the rear of my truck, instead of the 4" tapered block. I'm wondering what degree shims I should guess to order. I know it's a long shot, any help...
  13. 99'Subourbon

    Help Identify This Lift

    This is being sold as a 4" lift, but I can't find anything that matches any of the threads we have stickied. Can anyone tell what this is?
  14. 99'Subourbon

    Real Lift Susp TB Relocators - Not selling anymore?

    I read somewhere that the husband/wife divorced and are no longer making the relocators. Can't find where I read this, but does anyone have any info?
  15. 99'Subourbon

    Autotrac- Double Cardan CV Shaft?

    Blarg! Seems like the total price just keeps going up on getting my lift and gears in... So my 'Burb has autotrac; has anyone ever NOT needed the double cardan style cv shaft when installing the 6" RCX kit? Where can I look for these for some other prices/options than RCX's (it's $429)?
  16. 99'Subourbon

    Should I buy this? Not sure if LS1/LT1

    This is a double post - I apologize, I just need to get the guy an answer tonight, so I am hoping someone see's 1 of the 2 threads. So I may purchase this truck - but the guy doesn't know whats been done to it. He said he purchased it the way it is, and was told by the PO it was a LS1 engine...
  17. 99'Subourbon

    Re-Gear Quote, Seems good IMO

    Getting ready to re-gear, called a shop down in the valley: $1350 OTD For: Yukon 4.56s with Master Overhaul Kits - Front and Back (uknown brand) Deep Performance Differential Cover All Fluids, small parts, etc. 5 year warranty 1500 mile inspection & fluid change Seems like a hell of a deal to...
  18. 99'Subourbon

    No intake sound after tune?

    Just find it kind of odd... Prior to the tune my S&B intake sounded mean under throttle, but ever since installing my tune it doesn't make any noise at all, like it was stock. I don't assume something's wrong, but rather am curious as to why.
  19. 99'Subourbon

    Chevy-Art, great seller+++

    This is a late feedback, but I realized I never left it before. Order an intake from him, was quick to ship and easy to deal with!
  20. 99'Subourbon

    HOW TO: TBI Flowtech Headers & Y-Pipe on a Vortec + 3” SI/SO Exhaust for Burbs

    I recently did the install and thought I would share the setup for anyone else looking to do a full exhaust system on their Suburban’s (should work for any gmt400 year). This may also work on trucks and Tahoe’s, but I don’t have hanger locations or cross member locations to compare. I don’t...
  21. 99'Subourbon

    Identify this noise

    Hey everyone, as continued discussion from the tune thread, here is the noise my engine makes. Let me know what you think it is. Vortec 350 Motor Noise - Lifter Chatter?: https://youtu.be/ObDTwCXOdhk
  22. 99'Subourbon

    Am I that retarded? 87 octane in a 91 tune, WOT pulls

    So as the subject states... Finally got all my exhaust done last night, and installed my new PCM from BB. I wasn't thinking about the gas in the tank (obviously I know I need to run 91), and took it out for a spin with a few WOT pulls to 70~ MPH. I couldn't audibly tell it was pinging (exhaust...
  23. 99'Subourbon

    You guys with Long Tubes; O2 Sensor Extensions Needed?

    Hey everyone, I'm just getting everything ready for when I do my headers/exhaust install. Does anyone have any experience with long tubes on the 96+, and did you need to get o2 harness extensions to get your front o2 sensors to reach the collectors? If so, which ones did you get, and was it for...
  24. 99'Subourbon

    OEM Fender Flairs: Plastic?

    As the subject states - does anyone know if the oem fender flairs are plastic? I know they are yellow at the base, so I assume so.
  25. 99'Subourbon

    Need info on shock fitment - Ride quality

    Hey guys, Long story short, I need new shocks to improve ride comfort. I've already replaced all UCA/LCA bushings with energy suspensions, and completed redid the front suspension with moog parts (Ball joins, sleeves, pitman arm, stabilizer, etc). This greatly improved the handling and...

Latest posts

Staff online

Members online

... and 10 more.
Total: 1,989 (members: 60, guests: 1,929)

Forum statistics

Threads
64,343
Messages
1,391,689
Members
51,456
Latest member
A_larios

Share this page

Top