Search results

  1. Ryhno

    Anybody have transport wheels with a 5/7 drop

    Thanks. It needs a paint job and I’d like to bag it. I have to figure out front wheel tubs or something also, these wheels rub on real hard bumps.
  2. Ryhno

    Anybody have transport wheels with a 5/7 drop

    I finally got my truck converted to 6 lug and painted and installed my transport wheels.
  3. Ryhno

    Anybody have transport wheels with a 5/7 drop

    Yes I agree those black caps would look great! I think they would fit? I know the 4x4 chrome caps fit real nice
  4. Ryhno

    Anybody have transport wheels with a 5/7 drop

    Honestly I didn’t want to get into a dispute about the DOT of these wheels, I just want to see them on a Obs with a 4/6 or 5/7 drop and tires sizes. So anybody have any Picts and specs of static trucks with these wheels?
  5. Ryhno

    Anybody have transport wheels with a 5/7 drop

    I’m not sure but I think that was GM’s way of trying to keep those wheels from being sold to the public because they only made them for transport purposes? That’s why it’s a sticker and not stamped into the wheel like the DOT markings? But that’s just my thoughts?
  6. Ryhno

    Anybody have transport wheels with a 5/7 drop

    I googled DOT regulations and copied and pasted this from the website Rim Information The DOT requires each tire's rim or wheel disc to be marked with certain information for identification purposes. According to DOT regulation 571.120, the rim should be marked with the source of the rim and...
  7. Ryhno

    Anybody have transport wheels with a 5/7 drop

    They say 22x9j sorry that first picture was kinda blurry
  8. Ryhno

    Anybody have transport wheels with a 5/7 drop

    Here’s a picture of the wheels and a close up of the Manufacture and build date and DOT info.
  9. Ryhno

    Anybody have transport wheels with a 5/7 drop

    All four of my wheels are stamped DOT.
  10. Ryhno

    Anybody have transport wheels with a 5/7 drop

    I picked up a set of 22” GM transport wheels and I am wanting to see pictures of people that have them on OBS trucks with a 5/7 drop. I found a few pictures online but they are on bagged trucks. I just don’t want them to be too big looking for my truck if they are I am going to trade them for a...
  11. Ryhno

    The Stupid Lowered Questions Thread

    How are y’all doing a front 6 inch drop?I have a 94 ecsb step side that I have 3” DJM lower control arms on and a 2” DJM spring, I installed a 3” DJM spring but my tie rods are hitting the frame on the passenger side?
  12. Ryhno

    5/7 drop question ???

    Yeah actually the wheels and tires that I have on the extended cab are from the standard cab
  13. Ryhno

    5/7 drop question ???

    Yes They are both 5.7 v8 trucks and I’ve been driving it everyday to work for the last 2 months.
  14. Ryhno

    5/7 drop question ???

    Ok I have a question? Would a 1994 extended cab step side truck sit the same height as a 1991 standard cab long bed sit with a 5/7 drop? I’m asking because I sold my 91 sclb and bought a 94 ecsb and the extended cab sits about 1 inch higher in the nose than the standard cab did? The only...
  15. Ryhno

    Anybody on here burn TBI chips

    Hi, I have a 1994 c1500 5.7 auto that I want to delete the egr valve from it, does anybody on here burn custom chips for our trucks? years ago I had someone on the corvette forums burn me a custom chip for a 1986 corvette Tpi that I had but I forget what his name was. Please I don’t want to get...
  16. Ryhno

    XJ Steering Shaft Upgrade (88-94 Trucks) 95+instructions on page 31

    Ok, got it apart by drilling out those 4 indentions. This must be a new Design because it doesn’t have glue inside but those four indentions hold it to the inner shaft so it can’t slide.
  17. Ryhno

    XJ Steering Shaft Upgrade (88-94 Trucks) 95+instructions on page 31

    Hi, I have a question? I bought a 84-94 xj steering shaft from eBay. I tried for a hour to heat it and separate it lastnight. And I got no where except aggravated. But I’m wondering my steering shaft has 2 Indentions on both flat sides of the shaft that I don’t see on y’all’s that posted...
  18. Ryhno

    Behind the bumper Hitch

    Awesome!! I’ve been looking for one of those. Thankyou for taking the time to share that info
  19. Ryhno

    5/8 obs extended cab question

    Ok Thanks for the info.i appreciate it. Any idea what company makes that driveline alignment kit?
  20. Ryhno

    5/8 obs extended cab question

    I’m planning on putting a 5/8 drop on a 1994 extended cab flair side truck and wondering if their is anything that has to be done to the drive shaft carrier bearing or any other mods that have to be done to drop this truck the right way? I have DJM 2” lower control arms and DJM 3” springs for...
  21. Ryhno

    5/8 c1500 with 15x8 c10 rallies

    Ok thanks, yeah I have the Djm 2” Tubular lower control arms and djm 3” springs so that’s not a issue .
  22. Ryhno

    5/8 c1500 with 15x8 c10 rallies

    hi , I have a 1991 Chevy that has a 5/8 drop. I have a set of c10 15x8 rallies that I want to put on. What tire can I run without having rubbing issues on the front? Thanks
  23. Ryhno

    WTB 88-91 2" drop spindles & shackles

    Hi, this is my first time posting here. I'm looking for a set of 2" drop spindles and 2" rear shackles for my 1991 LWB Chevrolet. Let me know what you have. Thanks
Top