Search results

  1. Cadon69

    How to MarkVIII your OBS on a budget..!

    Yes I’m running the BMW sensor. I had the 180 thermostat and the engine never git warm enough to hit the optimal operating temp. So I swapped back to the 195. Now it gets plenty warm enough. I see get to just below 210 and then goes down and stays right around the 200 area like it should...
  2. Cadon69

    How to MarkVIII your OBS on a budget..!

    Ok so today I put the 195 thermostat back in. It seems to have made the difference I was looking for now the temps get up to the 200-210 range and hover in that area like it's supposed to. We'll see how well it stays working out. I am however going to look for a key on positive to hook in line...
  3. Cadon69

    How to MarkVIII your OBS on a budget..!

    Thanks. I ordered the tube from here. http://www.jagsthatrun.com/Pages/Parts_TPI-TBI_Brass-Tees.html I got it in 1-5/16 x 14mm x 1.5P. Although I may be changing it out since the temps are staying to low. I’m going to get either a 200 or a 210 temp switch then swap the thermostat back to...
  4. Cadon69

    Truckin's LED Retro's

    Oh snap I forgot about the all 4 mod. If thats an option I need that too LOL! Sent from my iPhone using Tapatalk
  5. Cadon69

    Truckin's LED Retro's

    All clear or smoked please. I have paypal and ready when you are LOL! currently I have clear (stock looking) that I smoked but I think I might go back to just clear for those. Sent from my iPhone using Tapatalk
  6. Cadon69

    Windstar efan conversion

    That makes sense, I want to eventually do the vortec heads but since I’m in ca I need the egr and the gm intake that had the provision for it is really expensive L0L! I don’t mind the fan running all the time. I am however still trying to figure out how I can turn it off when I turn off the...
  7. Cadon69

    Windstar efan conversion

    I’ve been running a 180 in mine also and I’m just wondering if it is cooling too much. The temp never even gets near 200 and I believe the tbi engine runs around 200 for optimal running. I have a single dual speed fan out of an older tbird I grabbed from the bone yard. I’ve been thinking of...
  8. Cadon69

    Windstar efan conversion

    What temp thermostat are you running? Sent from my iPhone using Tapatalk
  9. Cadon69

    Truckin's LED Retro's

    I not only want but need LoL! Sent from my iPhone using Tapatalk
  10. Cadon69

    Anyone had problems with RC 2wd lift spindles???

    I ended up installing a set of the fabtech upper control arms to get mine to align correctly. I also put in a set of moog cam bolt and what not. Haven't had any issues its been a little over a year now. Sent from my iPad using Tapatalk
  11. Cadon69

    How to MarkVIII your OBS on a budget..!

    Well I finally got some time to work on the truck again. I installed the Efan setup that I have been sitting on for awhile LOL! I did the best I could to make it look stock as possible. Aside from the relay that says Volvo on it LOL! Once it was done I fired it up and let it ru. For...
  12. Cadon69

    Poly bushing grease for zerk fittings

    I don't know about the synthetic but the fitting is standard.
  13. Cadon69

    Poly bushing grease for zerk fittings

    I use the same grease that I use for all the grease zerks under the truck. I don't remember the exact name but I believe it's red goo LOL! I get the tube at the local parts store and stick it in the gun and go to town LOL!
  14. Cadon69

    AC vents

    I'm going to the boneyard on Saturday. I always see them. I can grab you some. They don't cost anything hardly. I think when I got one for my truck back when I got it I paid like $2 L0L!
  15. Cadon69

    Post your white 400's

    Hot damn that is gorgeous!
  16. Cadon69

    95 Silverado Build

    Oh crap I'm an idiot L0L! I want to put some 1.5" on my rear too. Although I would really like to find a 14 bolt sf 6 lug from 4x4.
  17. Cadon69

    Leaf spring bracket

    From what I've read they are the same.
  18. Cadon69

    95 Silverado Build

    With the 1.5 you will for sure have the front higher than the rear. Like I said mine is a 3" block in the rear for now. I plan on taking it out and doing the shackle flip for a full 4" in the rear. It will give a bit if a higher rear end but it won't have blocks so I'm ok with it. Also I only...
  19. Cadon69

    95 Silverado Build

    Here is a side shot. I tried to straighten it as best I could. Here is a front view so you know how the front tires will stick out more than the rear. Somewhere I have a bunch of pics from the actual install too. Not sure if you want those also. L0L!
  20. Cadon69

    Door screws

    HOLY CRAP, how did I not think of that LOL!
  21. Cadon69

    Door screws

    Oh man lucky!!! It's not here, I just happen to be going next Saturday LOL! Although around here when they do 50% off weekends it's like the flood gates opened and the place is so full of people you can't even turn around without running into someone. Let alone getting any parts you want...
  22. Cadon69

    Tons of obs parts.

    Hey Nortex just wondering if you had a chance to see about the Black license plate lights. I am hitting up the bone-yard next Saturday and I will look there also. Thanks
  23. Cadon69

    95 Silverado Build

    Yeah I have to find them also I can go out to the driveway and snap a few new ones. My driveway is slanted though so not sure how it will look as far as trying to see the levelness LOL!
  24. Cadon69

    Door screws

    So am I LOL! I am going next Saturday, I can also grab some for you.
  25. Cadon69

    95 Silverado Build

    I did the 4" spindles on mine and then did 3" blocks to make sure it was actually level. To me the 2" made it a little higher in the front and I didn't c Are for that look. Just good for thought.

Latest posts

Staff online

Members online

Total: 772 (members: 15, guests: 757)

Forum statistics

Threads
64,231
Messages
1,389,242
Members
51,179
Latest member
anar14

Share this page

Top