Search results

  1. S

    Blower fan speed problem

    So far each response is the only 3 things I have left to look for haha. I was thinking relay or resistor but as I'm thinking about it, my controls on my panel are acting up. The recirculation button won't work. The truck won't provide hot air making me wonder if the module is triggering the...
  2. S

    Blower fan speed problem

    kind of a weird problem today. Had my AC going with 0 issues yesterday. Hop in the truck this morning and the blower isn't working at all. Found out the ground wire is faulty somewhere in the circuit. So I jumped the ground but now the blower won't work on Hi. Any ideas? Also noticed...
  3. S

    Early nv4500 hydraulic system

    Correct. Had a problem before when I did my LS swap. Tried bleeding, no luck. Bought a pre-bled system, everything worked great. Little sticky sometimes, but it worked. Blew MC out yesterday, replaced just MC, been trying every form of bleeding procedure besides vacuuming the system, no...
  4. S

    Early nv4500 hydraulic system

    I've about had enough of the nv4500 hydraulic system. Yesterday I had a 2 month old system blow out on me. The plastic MC blew out. This is the second one I've had blow out on me. I went to the local advance auto and picked up just a MC that happens to be a steel one. I have had nothing but...
  5. S

    HVAC controls not working

    Recently did a LS swap in my 95. Sent the computer back to the tuner a second time to screw with the tachometer settings. Anyway, prior to sending it back, all of the HVAC controls worked. After plugging the computer back in, now they do not work. I do believe it is coincidence but just some...
  6. S

    HELP!! Clutch engagement issue

    I had a 4l60e so that issue wouldn't apply to me. Swapped in a whole new system. Works good now. Does brake fluid thin out when it gets heated up? I'm wondering if this is the case since I have headers and since it only happened when the truck got warm.
  7. S

    HELP!! Clutch engagement issue

    I picked up a Mitey vac. After about ten minutes I got frustrated with it and decided to scrap the whole bleeding idea and grab a complete new setup. It's working great now
  8. S

    HELP!! Clutch engagement issue

    Your right disengaging sorry. Yeah it's an external slave. I picked up a hand vacuum pump for a brake system and am going to give that a go. If not, I'm probably just going to pick up an entire pre-bled system. Hopefully the vacuum pump does the trick.
  9. S

    HELP!! Clutch engagement issue

    Update: drove to work this morning. Same thing as yesterday. Towards the end of my trip after the truck was warmed up, I began to have issues with the clutch engaging. It seems like my grabbing point for the clutch slowly disappears. I can feel the pedal give when the clutch engages but as...
  10. S

    HELP!! Clutch engagement issue

    That's what I was possibly thinking. Idk what could have happened to it by simply sitting for a year.
  11. S

    HELP!! Clutch engagement issue

    0 pedal play. Firm pedal all of the way down.
  12. S

    HELP!! Clutch engagement issue

    Trying to be a little urgent about this since I need the truck this upcoming Friday. Although may be a long description, I'll try to include as many details the first time around. Did a 92' nv4500 swap a couple years back. Everything worked fine except having a tad of an issue getting the...
  13. S

    Walbro 255 lph fuel pump

    For the LS guys, I have a walbro 255 lph inline fuel pump I'm looking to sell. It's brand new still in box. Decided to take a different route. $90 shipped.
  14. S

    Fuel pump

    Was wondering if your able to run an inline fuel pump along with the in tank fuel pump? If you can't run both pumps at the same time, can you disconnect the old in tank tbi pump and have the inline pump still work? May be a stupid question but I haven't been able to find out the purpose of...
  15. S

    Cam for lq4

    Man decisions decisions lol. All I know is I want something focused on low to mid range. Both the 224 and 228 seem to accomplish that. I think I'll just look into both cams and do a comparison. I definitely need to do some more research in the science of cams as well. After reading your...
  16. S

    Cam for lq4

    Yeah looking at TSP, they're 228r is .600/.600. I think I'm going to go with this one but get the whole kit. What would be the difference between the .650 or .660 springs? Any benefit of one over the other? Tried searching around and haven't really found a definitive answer.
  17. S

    Cam for lq4

    Called tsp and the guy recommended a 228r, 112lsa. Any thoughts?
  18. S

    Cam for lq4

    Would you mind schooling me on the benefits of the double comp springs?
  19. S

    Cam for lq4

    Yea I know I wanted something that gets that heavy truck and big tires moving out of the low rpm range. Was looking for something from low to mid range. I hear a lot of good things about Texas speed and performance through the other sites. They may have to be someone else I look into...
  20. S

    Cam for lq4

    So I am in the middle of doing a 6.0 lq4 swap into my 95 k1500 and am looking to do a cam while I have the motor out. It'll be a first as far as cams go so I'm looking for suggestions. I called lunati and the guy recommended a voodoo with 212/218 duration. Part number 20540710. I have read in a...
  21. S

    Headers

    I've searched for this all over but haven't had much luck so hoping someone may be able to point me in the right direction. Picked up an lq4 last night and I'm looking to start collecting parts. Anybody have any idea on what or if there are headers that will fit this motor while going into a...
  22. S

    Headlights

    You happen to have a link?
  23. S

    Headlights

    So it's sounding like HIDs are the way to go if I want something brighter than stock. Glare caps are pretty much essential which I knew from previous research. I could look for projector headlights but most don't look good by any means...IMO. Anyway thanks for the run down. Maybe I could...
  24. S

    Headlights

    They're not too bad. They are without a glare cap? I was also looking at the DDM HIDs. Seems that's what most people go with.
  25. S

    Headlights

    It's not like I'm looking to get 8000k HIDs, kind of just want something wth better light output with housings that can tame the light and keep it under control. Seems to be an issue trying to find a good looking set of housings that will work well with HIDs on these trucks. Anyone care to...

Latest posts

Members online

... and 6 more.
Total: 1,393 (members: 56, guests: 1,337)

Forum statistics

Threads
64,315
Messages
1,391,206
Members
51,406
Latest member
Mako199

Share this page

Top