Search results

  1. ChrsLytn

    98 k1500 Slop in shifter handle

    I had my 4L60 replaced, got the installer to replace the main shift cable. The original cable clip had broke at the transmission. I had zip ties on it. The slop was in the movement of the shifter handle before transmission and cable were replaced. I figured that the original cable with 352 K on...
  2. ChrsLytn

    1998 K1500 CD player not working

    This a single CD player, sits below the climate control. It just decided to not work one day. Don't use it much but I like for it to behave when I want to. Push eject and it does nothing except showing err after pushing it several times. Then I didn't drive it for a while the battery was low. I...
  3. ChrsLytn

    AC not getting cold

    I've got new compressor, condenser, orifice and dryer from Napa. Flushed all the lines and the evaporator. Added 8 oz of oil to the system where it said to. Charged it with 2.25 lbs of 134 and I'm getting what can be seen in the video. The AC worked decent back in October but the compressor...
  4. ChrsLytn

    Yukon Duragrip/US Standard ring and pinion

    98 K1500 8.5" 10 bolt 3.73 I got new carrier, ring and pinion. I put the original shim, .0037 I believe on the new pinion and pressed bearing on. I've been talking with tech support at Yukon but have been unable to get them since Wednesday before Thanksgiving. Assuming these patterns were good...
  5. ChrsLytn

    Ain't nothing simple.

    Changed my oil yesterday and saw the rt. cv axle was slinging grease. Went to NAPA and got a reman axle, the famous 5 gal. blue bucket and 2 cans of cleaner for the mess and 20% discount. When I took the axle out there was a "dust cover"(?) I guess,it covered the rubber seals on the backside of...
  6. ChrsLytn

    New leaf springs/Tightening the bolts

    98 K1500 I have just finished replacing the leaf springs and shackles on my truck. I'm not sure how the shackles should be positioned when I tighten them up. Should I let both springs just hang and tighten the shackles lower bolts first? That will have them both perpendicular (how bout that...
  7. ChrsLytn

    Cool weather brings on P0171 bank one lean

    98 k1500 5.7 321k miles I don't know if this screen shot is cooperating. LTFT 1 is 19.6% LTFT 2 is 15.2% These mean extra fuel is being added to trying to correct the lean condition. Is that right? And it could be a half dozen or more possibles? From an exhaust leak to an intake leak. I...
  8. ChrsLytn

    98 Z71 multifunction switch is multifunky

    My cruise had quit working recently and now windshield washer fluid has quit also. I'm jumping to the conclusion that the mf switch is bad after 311k miles. I got one from O'Reilly's the other day for 100.00. I haven't replaced it yet and it looks like the original but when you move the turn...
  9. ChrsLytn

    98 Z71-We've been together for 20 years

    I bought it in '99 with 17K miles for $17K. It's got 311K miles on it now. Transmission is only major repair. It gave up at 211K. All original except dual exhaust with Flow Masters. It still gets comments and compliments and the occasional "do you want to sell it?". Which the answer is no. I'd...
  10. ChrsLytn

    2, 3, 5, 6 misfire occasionally when idling. 3 and 5 more frequent.

    208k mi. New plugs, wires, cap and button. Haven't seen any misfires show up while driving, only when it's idling. Probably need distributor, gear worn out? Whose to get and whose not to get? All of the 02 sensor readings are good. Thanks
  11. ChrsLytn

    98 Z71 Used but not abused. 200k

    Been mine since 99. Might as well keep it.
  12. ChrsLytn

    98 5.7 vrt- new napa spider inj. assy. all 4 o2 snsrs new. s.o.b. still ain't right

    I had the inj. assy. and MAF replaced about 2 weeks ago. Next day ses came on, scan said one of the 02 sensors was doing something. I've been f'ing with them off and on for a while so I went and got all 4 of em. Drove it a few days, gas usage a little better. Today ses came on again. Scanned it...
  13. ChrsLytn

    20 A fuse for ecm1 blows

    Truck quit running. Found blown fuse. Fuse blows soon as ignition is turned on,
  14. ChrsLytn

    98 Z71 Bought it in 99 with 17 k on it.

    All original except new Magnaflow converters, pair of Flowmasters and pipes out the back. 179 k now.
  15. ChrsLytn

    p0785

    I replaced 1-2 and 2-3 snoids with ac delco parts. Cleared out p0785 code. Start engine,put in OD,1st gear works,2nd,3rd,OD worked. Stop sign,starts off in 3rd,manually to 1st it will start off in 2nd,shifts hard to 3rd,no OD.No down shifting as in a passing gear. Turn off,restart,1st good at...
  16. ChrsLytn

    4L60E/ Square pad on inside of trans. pan?

    Is it a magnet to collect shavings? There weren't any if that's the purpose. I pulled the pan because i got a p0785 code, shift solenoid be funky. I gotta figure out which one it is. But i got 2 buddies that have shops so one of 'em better tell me right in the a.m. I never serviced the trans. in...

Latest posts

Members online

... and 19 more.
Total: 1,849 (members: 69, guests: 1,780)

Forum statistics

Threads
64,341
Messages
1,391,580
Members
51,452
Latest member
Swift

Share this page

Top