Search results

  1. ShadowRejects

    Strange issue. Any help appreciated. Sudden no-spark at random times.

    My truck has ran like a top for months and about 3 weeks ago it would suddenly die while driving. Somewhat like ICM issues so I just went ahead an replaced the ICM and the fuel filter. It drove fine for 2 weeks and last week another issue occured. I would be driving and let it warm up and park...
  2. ShadowRejects

    1994 350 tbi. Removing AC Clutch?

    My wires ripped out from the inside of my ac clutch. I took the bolt on the front, But I cant tell if there is a snap ring inside of there or it's just simply pressed in and I have to rent a puller for it. I found a clutch assembly for sale on rock auto, but I dont know if these are hard to...
  3. ShadowRejects

    4wd doesnt engage, Even with a new actuator

    Last week, my 4wd stopped engaging. I replaced the actuator, and it works. I tested it out side the diff. Im also getting power to my 4wd fuse and the fuse is fine. Tested those as well. But it just wont lock in and turn my 4wd light on. The bulb is fine on the floor shift too. Cant get my head...
  4. ShadowRejects

    New fuel pump and fuel pump relay. Injectors still arnt squirting fuel.

    My truck was acting funny for about a week, I.e. - Wouldnt start sometimes, requierd a jump and my pedal to the floor to start it. It would bog down pretty bad, almost sounding like it was under water :( In response, I replaced my fuel pump, and my distributor, and my fuel pump relay. Zero...
  5. ShadowRejects

    4.56 gears, quoted $800 for install. Anyone else get cheaper?

    Ordered me two sets of 4.56 gears nearly 5 months ago and theyve been sitting in my truck eversince i took it to the shop and they quoted me 800$ :nono: i know that sounds about right for such a labor intensive job, but I was wondering if anyone else might've scored cheaper? I know you get what...
  6. ShadowRejects

    Need some clarity with the 3" body lift

    Im installing my 3" body lift and i need some clarity on what to do with the automatic transmission linkage? Im so lost right now :pokeowned: it says to pull the slack from the bottom of the floor board, I dont see how that accomplishes anything. I have a 3" PA body lift
  7. ShadowRejects

    Lifted Dodge Ram ends police chase lifted truck style!

    Found this on my local news, thought it would be badass to share. A 14 year old stole his grandpa's car and went on a police chase around a park, a pissed off parent took matters into their own hands before someone got killed. the pictures show the car after the crash and the dodge. This is...
  8. ShadowRejects

    Just how hard is it to replace a Power Steering Pump?

    Im curious. Ive been driving with little to no power steering for almost 4 months now and i went ahead and bought a new pump and going to rent a pulley puller and probably tackle it this week. :rockit: I just want to know what im getting myself into, to those that have replaced em, was it...
  9. ShadowRejects

    Professional picture with your truck.

    I've been debating on posting this thread for so long, In fear of people thinking i'm some teenager trying to ***** up with his truck.. But it's gotten to the point where I really feel the need to share these pictures and I've been really interested in seeing if anyone else takes professional...
  10. ShadowRejects

    High rpms, slow accel, hard shifts, no power

    Drove fine to class and I came out and my truck started up fine but it immediately started shifting hard and when I full throttle it, I go no where. Its really worrying me because the trans was replaced less than 20,000 miles ago and has been driving fine til today. Any ideas? Fuel filter...
  11. ShadowRejects

    I am hung on a decision, and I need yalls help.

    When it comes to decisions, Im terrible. Especially on things that are permanent/expensive to fix. My paint job is one of them. I have needed a new paint job forever now. My driver side is is MINT condition but my passenger side paint is terrible. Peeling clear coat, rattle canned touched up...
  12. ShadowRejects

    Huge increase in gas mileage... What could cause this?

    Running 3.42's and 35's, I get terrible gas mileage. Usually 140 miles between fill ups with my 25 gallon tank. But for some odd reason, This week I got an awesome 180 miles and I still have I-would-guess another 20 more miles to go before I need to fill up :hail: I didnt alter anything on...
  13. ShadowRejects

    Does anyone have Sub box measurements for a EXT cab?

    It would be greatly appreciated if anyone has some measurements or a schematic. Im planning on building one this week and I would hate to do it all from scratch. Rep to whoever does.
  14. ShadowRejects

    Knocking sound while coasting..

    Hey guys. a few days ago my truck started making a knocking noise while coasting only. its gotten worse and i cant seem to figure out what it is.. My CV shafts are fine, so is my steering link stablelizer as well as my ball joints and tie rods. It almost sounds like there is a screw in my tire...
  15. ShadowRejects

    Cannot diagnose this squeak. More than fed up and annoyed.

    About a week ago, my truck started making a sqeaking noise coming from the front driverside suspension. Everytime I hit the tiniest bump, it sqeaks louder than you can imagine. So I was convinced it was a bushing on the a-arms, so I lubricated them all, didn't do a darn thing, I thought my...
  16. ShadowRejects

    can someone change the color of my truck?

    If anyone doesnt mind. i can do just about anything in photoshop except color.. :nono: can someone change the color of my truck to tan/gold? Rep to whoever does it. :crazy:
  17. ShadowRejects

    anyone open their headlights and modify them?

    Seriously debating on taking my ebay clear headlights out and popping them open and maybe sticking some halos or something inside of them. But last thing i want is for them to build up condensation :chicken: anyone?
  18. ShadowRejects

    Has anyone taken their truck to Moab, Utah?

    eversince I saw videos and other trucks at Moab Utah, (mainly Hell's Revenge) I have always wanted to take a road trip to Moab Utah. Plenty of off-road trails, Basically an off-roader's heaven..... I was wondering if anyone has taken a trip up there in their GMT400. If I get enough money saved...
  19. ShadowRejects

    GMT400 Model kits

    if anyone was interested Blue Tahoe http://www.ebay.com/itm/AMT-Ertl-SnapFast-Plus-Skill-Level-1-1996-Chevrolet-Chevy-Tahoe-Model-Snap-Fast-/380768080611?pt=Model_Kit_US&hash=item58a78bd2e3 Darkish Grey tahoe...
  20. ShadowRejects

    Anyone color match their side markers?

    Id hate to do it, but im sick of the ebay ones hazing over, im on my 2nd set and i replaced one yesterday after about 4 months and the difference is night an day. The yellow haze is killing me, not to mention they leak and suck As*.. Has anyone color matched them? im actually considering...
  21. ShadowRejects

    Has anyone colormatched their wheels?

    Been doing a bunch of thinking lately on my truck (whats new.. lmfaO :deal:) I was wondering, if anyone has colormatched their wheels? I know Tiff has, but i was wondering if anyone else has. Im not going to keep my pathy wheels for much longer so i figured why not experiment with them. i...
  22. ShadowRejects

    Should I color match my bumper?

    A few of you know my truck and how its color matched all the way around except for the bumper. I always decided against color matching it due to the fact that I go mudding a lot and run over lots of shrubs:crazy: but if I do colormatch it, I would wrap the finished product in clear vinyl wrap...
  23. ShadowRejects

    About how much will new gears run me?

    Tore open my diff today to discover i had 3.42's.... :( which is a big no-no with 35's. now i see why my truck is so slow at takeoff :Pshyco: how much would a set of 4.56's run me for both axles?
  24. ShadowRejects

    Anyone else keep snapping CV shafts?

    It seems like almost everytime i take my truck out and play, i snap a cv shaft. Im running 35's with a 6'' rcx and very little crank and they snap easily. I notice they start to sound bad after a sharp turn, mainly in 4wd. Almost like they bind and snap. anyone else have this issue...
  25. ShadowRejects

    Has anyone ever snapped a torsion bar?

    I had an idea of rotating/flipping mine so they are cranked and torqued in the opposite direction they were to begin to to kinda re-new them to a certain extent.. but i was reading online (mainly on FORD forums) that torsion bars have the tendency to snap and break, so flipping them would in...

Latest posts

Staff online

Members online

... and 4 more.
Total: 1,534 (members: 54, guests: 1,480)

Forum statistics

Threads
64,248
Messages
1,389,813
Members
51,236
Latest member
Old97silver

Share this page

Top