Search results

  1. the big blue bus

    How-To: Install a trans temp gauge in a 95+ GMT400 with a 4L60e

    same way i did mine. mine seems to run around 150
  2. the big blue bus

    14 Bolt SF Build

    .038 .005 backlash
  3. the big blue bus

    14 Bolt SF Build

    .030 pinion backlash .005 looks kinda weird
  4. the big blue bus

    14 Bolt SF Build

    pinion shims .036 carrier .207 backlash around .007
  5. the big blue bus

    14 Bolt SF Build

    it was at .041 i made it .036 now setting jut all back up
  6. the big blue bus

    14 Bolt SF Build

    will do. i didnt hav my micrometer when i put the pinion shims in. ill tak it back apart and measure the shims in the morning and adjust is back somemore. sorry to jack this thread just trying to get opinioins, this is my first time
  7. the big blue bus

    14 Bolt SF Build

    well i took one fo the pinon shims off and adjustd the backlash to .005. forgot to masure the pinon shims but th carrir shims are .205 i think i still see a line but it looks like its getting shallowr? or am i just imagining things. should i bring th pinion back some more?
  8. the big blue bus

    14 Bolt SF Build

    thanks for the info. going to drop the shims back on the pinon and see what it does
  9. the big blue bus

    14 Bolt SF Build

    here what i came up with messing some today any pointers?
  10. the big blue bus

    14 Bolt SF Build

    ive made setup bearings. main thing i needed was the specs and to borrow an inch pound torque wrench.
  11. the big blue bus

    14 Bolt SF Build

    any more info on this? still havent been ablke to get it done. whar about the torque specs.
  12. the big blue bus

    14 Bolt SF Build

    saw it when i pushed the pinion bearings off today. so i dont need to make carrier set up bearings? just both of the pinion ones correct? and did you use no crush sleve or the old one for set up?
  13. the big blue bus

    14 Bolt SF Build

    have usa standard gears and got a motive install kit comming. got the axle all torn down today and didnt notice any shims on the pinion? do they go behind the bearings
  14. the big blue bus

    Rausch Creek Summer Trail Ride - (June 21-23)

    i would so go but i doublt ill have the front axle regeard to 4.88 and the shock mounts redon by then :/
  15. the big blue bus

    14 Bolt SF Build

    how did you adjust the collar and figure what shims to use for the carrier? im about to regear the 14sf i got to 4.88 with a lock right. trying to do all my research while im still collecting the parts for it. do i only need to make set up bearings for the pinion since the carrier uses shims on...
  16. the big blue bus

    14sf 6 lug disc brake swap questions

    not going to do this for a little while. got a nother 6 lug rear, well my buddy bought it but im trading mine with 4.10s for it and putting 4.88s in it and a lock right
  17. the big blue bus

    241 front flange swap issues

    never updated but got the other flange machined like the stock one and havent had an issue since then. its nice having solid axle and 4wd but that will be short lived when i get the gears and locker in the rear
  18. the big blue bus

    Opinions on front axle

    id say just collect parts as you find them. waiting pays off... more than one way.
  19. the big blue bus

    14sf 6 lug disc brake swap questions

    off a 10 bolt 2000's silverado then i found this on pirate last night. pretty much what i just said up there http://www.pirate4x4.com/forum/chevy/856510-14bsf-factory-discs.html ive done a lot of searching for kits but i never really saw anyone that had much luck without modding im...
  20. the big blue bus

    14sf 6 lug disc brake swap questions

    i have looked at the stickey and had a few questions. are the backing plates the same for a single or dual piston caliper? found backing plates on ebay for good price so i want to start collecting parts for the swap. the other question was i know you have to do some sort of spacer. we had an...
  21. the big blue bus

    blue bus solid axle adventure

    ah haha i was going to do 37s but decided not too. im still waiting on the track bar kit to come in. next weekend im going to remove the abs pump and start redoing all the hardlines up front and on the rear. going to run the front lines down the back side of the frame and 90 on the bottom and...
  22. the big blue bus

    blue bus solid axle adventure

    you got a 60 up front and 4.88s and 37s? ive just got a hpd44 and 6 lug 14sf with 4.10s and 35s haha
  23. the big blue bus

    blue bus solid axle adventure

    lol i dont think thats a fair trade on your end
  24. the big blue bus

    blue bus solid axle adventure

    thanks for the tip ill make sure we brace the frame mount good.
  25. the big blue bus

    blue bus solid axle adventure

    lol just kidding. the tie rod end stabilizer bracket came from wfo today so ill bolt that up once i finish therest of it. axle is halfway back together. ruff stuff panhard has been orderd too
Top