Search results

  1. timberjacked

    Trouble Connecting to TunerPro RT

    Damn that is EXACTLY my symptoms, but I thought it had to do with me messing with the idle screw or some wicked vacuum leak lol I do not have another obd1 go to try it on, though I’m sure if I walked in my neighborhood I’d seen 5 or 6 haha
  2. timberjacked

    Trouble Connecting to TunerPro RT

    Yupp so replacing the engine coolant sensor got my idle nice and smooth and I’m running well through all temps, and rpms so far! Bad luck my SES light was burnt out!! Still not able to connect to TunerPro, but at least now I can figure it out with a little less pressure haha
  3. timberjacked

    Trouble Connecting to TunerPro RT

    truck has the nv4500 but the engine (350tbi) and ecu came out of a donor vehicle with an auto transmission. that is why I am assuming this sensor is not connected!
  4. timberjacked

    Trouble Connecting to TunerPro RT

    I have indeed seen them and followed along. I will do it again though because sometimes that's all it takes haha
  5. timberjacked

    Trouble Connecting to TunerPro RT

    Man thanks for all the great info. Is this sensor the one between spark plugs #1 and #3. Today was payday so I'm back in the 'lets-just-throw-parts-at-this-*****' mood.
  6. timberjacked

    Trouble Connecting to TunerPro RT

    Ha yea a couple, not sure how relevant they are tho since I disconnected the battery to pull the ecu yesterday. 15, 59, 67, 82 From repairpal.com/gm-obd-i-code-chart 15- low coolant temp 59- Trans fluid temp circuit high 67- A/C pressure sensor circuit 82- 3x crankshaft position sensor...
  7. timberjacked

    Trouble Connecting to TunerPro RT

    Okay the bulb was indeed not working but I replaced it and it goes into diagnostic mode with the paper clip trick
  8. timberjacked

    Trouble Connecting to TunerPro RT

    That’s what I thought but I’ve made dumber mistakes than that before!!
  9. timberjacked

    Trouble Connecting to TunerPro RT

    I am just double checking that I only have a Service Engine Soon light and NOT a CEL... is that correct? lol I feel like a dummy for asking, but I just want to make sure.
  10. timberjacked

    Trouble Connecting to TunerPro RT

    BDKA on both ✅ It was well-seated but reseated ✅
  11. timberjacked

    Trouble Connecting to TunerPro RT

    I mean.. it was seemingly running fine. It’s not my daily by any means. And yea, the PO did 0 maintenance so I figured tbi rebuild was a good idea. I was also gonna redo the exhaust here soon and wanted to get it running really smooth before so I had a decent reference point to judge the effect...
  12. timberjacked

    Trouble Connecting to TunerPro RT

    Alright is it just a matter of replacing a bulb? I’ll look into this next haha All of this weirdness started after I rebuilt my throttle body. If it is my ECU, could my truck have been operating with a faulty ecu prior to this or would I have had to do something to brick it?
  13. timberjacked

    Trouble Connecting to TunerPro RT

    Yupp
  14. timberjacked

    Trouble Connecting to TunerPro RT

    For some reason, I skipped right over reading this message I did not intend to ignore it... Nothing was plugged in to the cigarette lighter. When I turn my key on, I don't even have a CEL anymore, thinking it may have burned out? Although I know the light had worked in the not too distant past...
  15. timberjacked

    Trouble Connecting to TunerPro RT

    I’m starting to think I may be having some type of electrical issue because 1.) resetting the IAC as per this does not seem to work for me (it’s a new IAC) 2.) I cannot connect to TunerPro RT I don’t even know where to begin diagnosing electrical issues or whether or not this hunch makes sense
  16. timberjacked

    Trouble Connecting to TunerPro RT

    Yes sir that’s how I have the throttle stop screw set! Just enough so the throttle doesn’t feel sticky. My BCC is BDKA And the gear head forum…. I should say that the “confirm your email” email never came through
  17. timberjacked

    Trouble Connecting to TunerPro RT

    I was hoping to use TunerPro for the tps adjustment haha Dumb question: just want to verify that my aldl looks like it’s using the correct pins and that a PO didn’t doing something weird. A- black/white B- white/black C- D- brown/white E- green F- G- Red H- White JKLM- Seem legit?
  18. timberjacked

    Trouble Connecting to TunerPro RT

    Yupp. In fact it looks like I am using the same exact adx file as you... I bought the Red Devil River one. Sounds like people have trouble with them (although I got the ALDL -> USB not bluetooth). LOL I submitted a request on Friday to join that forum, but haven't heard back. It took me 5...
  19. timberjacked

    Trouble Connecting to TunerPro RT

    I looks like I did indeed select Standard Serial. I also selected the "older" FTDI driver that I've read plays nicely with TunerPro RT. At this point, all I can think is that maybe the ALDL port on my truck isn't receiving data? I was hoping that this would help me learn a bit more about my...
  20. timberjacked

    Tunerpro rt and 1993 Silverado issues

    I’m having the same issue, (actually same aldl cable and ecm#…) did you ever get it working?
  21. timberjacked

    Trouble Connecting to TunerPro RT

    Hi there, After reading some of the forums I decided my maintenance approach of just throwing parts at my truck was probably not the best. I downloaded TunerPro RT, bought the ALDL cable from Red Devil River, got what I think are the correct xdf and adx files for my ECM and tried to get...

Latest posts

Staff online

Members online

Total: 1,402 (members: 47, guests: 1,355)

Forum statistics

Threads
64,312
Messages
1,391,165
Members
51,392
Latest member
Jman03

Share this page

Top