Search results

  1. Jeremy D

    1999 14 bolt backing plates

    I was able to locate a set and have them shipped from Oklahoma, thanks anyway
  2. Jeremy D

    1995 k2500 guage cluster warning lights stuck on?

    alright, will do. I'm pretty much done with the truck until spring (working in the driveway in the GREAT state of Maine is no fun in -50 weather)
  3. Jeremy D

    1995 k2500 guage cluster warning lights stuck on?

    so doing some experimenting today, pulling the "eng-1" fuse gets the lights to turn off when the key is off but still work when the key is on. What does that fuse control?
  4. Jeremy D

    1995 k2500 guage cluster warning lights stuck on?

    so, things that were swapped into truck #2 was the ecm, engine wiring, under dash wiring harness, steering column, guage cluster and a few things for the egr, the transfer came out of a 2000 sierra 2500 classic with an nv4500 and the trans is fron an 02 with a 6.0 as for the cluster i replaced...
  5. Jeremy D

    1995 k2500 guage cluster warning lights stuck on?

    Does anyone know what it could be?
  6. Jeremy D

    1995 k2500 guage cluster warning lights stuck on?

    so... Been a little busy lately and finally got back to working on the rig, changed the steering column out for a different one I had, still the same issue, Figured I would see if it was the cluster... nope lights still on I disconnected all the sensors on the engine I had to change STILL no...
  7. Jeremy D

    installing factory Fender flares on a wt truck?

    awesome, thanks guys. I'm going to go get the replacement bed next sunday, after that I'll get to work putting those flares on
  8. Jeremy D

    installing factory Fender flares on a wt truck?

    So I can just mark and drill the holes? Nothing special?
  9. Jeremy D

    installing factory Fender flares on a wt truck?

    So I'm in need of a new bed for my truck (1995 K2500 Silverado) and I was wondering how to put the factory fender flares on a bed that did not originally have them( bed I'm looking at is off of a WT) how would I do this and is it possible, thanks in advance
  10. Jeremy D

    1995 k2500 guage cluster warning lights stuck on?

    alright, I'll have to check that out. Thanks man
  11. Jeremy D

    1995 k2500 guage cluster warning lights stuck on?

    so i have a 1995 chevy k2500 extended cab longbed with the 5.7 tbi, I'm almost done nv4500 swapping the truck but I have an issue that was in my parts truck but has now begun in mine, the guage cluster warning lights are on CONSTANTLY if the battery is connected. Key is off and out of the...
  12. Jeremy D

    how to remove the steering wheel airbag off of a 95 k1500?

    How do i remove the airbag on a EARLY production 1995 chevy K1500? all the videos I have found are for the later style airbag retention with the spring loaded bar
  13. Jeremy D

    NV4500 swap questions

    I have heard about people using the master from an f350 when doing these swaps on a squarebody, not sure what year f350
  14. Jeremy D

    NV4500 swap questions

    one other question, What clutch master cylinder can i run? the stock 95 one will not work with the internal slave cylinder and the later ones use a different mounting system
  15. Jeremy D

    NV4500 swap questions

    thats what i was thinking, just wanted a second opinion on it before i buy all the parts
  16. Jeremy D

    NV4500 swap questions

    I have a few questions about the NV4500 swap that I'm doing on my 1995 chevy 2500 4x4, my transmission is from a 2002 chevy 3500 with the 6.0 ls in it and i have a donor truck for all the other 5 speed parts pedals guage cluster column and wiring, same year engine and cab as mine but a half ton...
  17. Jeremy D

    1999 14 bolt backing plates

    unfortunately the backing plates have been discontinued by GM, anybody got a set they would sell? or can i get the disc brakes off of a truck with the same axle that is 1 or 2 years newer?
  18. Jeremy D

    1999 14 bolt backing plates

    its a full float 10.5 with 13x3.5" brakes. would the brakes from an 01 or 02 with the same axle bolt on to mine?
  19. Jeremy D

    1999 14 bolt backing plates

    I need a set of backing plates for a GM 14 bolt rear axle out of a 99 suburban 2500 6.5 diesel, this axle has drum OVER hub and backing plate are almost impossible to find. does anyone either have a good set they would want to sell. OR know if i can get a complete disc brake kit from a truck...
    • Jeremy D
    • Thread
    • 14 bolt backing plates chevy 2500 disc brake swap
    • Replies: 10
    • Forum: Axles + Brakes

Latest posts

Members online

... and 10 more.
Total: 1,860 (members: 60, guests: 1,800)

Forum statistics

Threads
64,326
Messages
1,391,404
Members
51,430
Latest member
Noel11

Share this page

Top