Search results

  1. caw_86

    14 bolt sway bar mounting

    looking for ideas for hardware for mounting the factory rear sway bar bushings to a 14 bolt axle. My google searching hasnt found anything greater the 3.25". Preferably something designed for this use, I know i can find the proper size u bolt clamp but base plate on those are very skinny
  2. caw_86

    Axle yoke and seal

    I pulled the yoke off my 1998 10 bolt last night and was a little confused. I re-did the front diff already and it didnt look like this, not to say they should be the same, but in the part diagram this doesnt look like it should be there. I thought the metal cup thing is the deflector, but not...
  3. caw_86

    Stock ride height

    I just put my entire front end suspension back together. I put the torsion bolts as close to 34mm as i could according to this service manual instruction. When everything was on the ground and tightened up, the front is sitting about 1.5 inches higher than the rear, i measured from the bottom...
  4. caw_86

    Dash switch bulb replacement

    Posting this to share pictures of a disassembled switch to show the internals, why this site wont let you paste pictures in PMs is ridiculous @Georgiabigfoot
  5. caw_86

    Rebuilt case

    I know the best way would be to open it up, but not just there yet. This is a np246 on a 98 tahoe. Other pictures ive seen they either have hex bolts with a cover of some kind or a hex bolt with some inverted shroud thing. Does this having 12 point bolts likely indicate either a rebuild or at...
  6. caw_86

    1998 Stamped LCA

    1998 Stamped LCA $100 Not really looking to ship, not worth it for either party Located in DFW, TX
  7. caw_86

    Rear disk brake line brake line bracket

    would you be able to make a bracket like the one circled in red, 1/2 holes for 14bolt axles, 3/8 for 10 bolt. Its for those who dont/cant weld on a bracket the mount the hard line to flex brake line
  8. caw_86

    torsion bar goof

    so like almost every newb when it comes to things, I done goofed and didnt think twice about keeping my torsion bars marked or separated. dont know which is left or right, front or back, and they have been powder coated. I could grind off paint until I find part numbers to determine which goes...
  9. caw_86

    master cylinder tubing

    on the right is An AC delco replacement MC, on the left is a tuffstuff universal. the specs seem to match, 1 1/8 bore, 1/2-20 and 9/16-18 ports. shallow hole. mounting spacing identical. But the holes appear to be swapped, larger towards the back and smaller in front, as opposed to larger...
  10. caw_86

    8.25 crush sleeve eliminator

    Anyone know if a kit for a front diff crush sleeve eliminator exist, not having any luck searching the interwebs for one
  11. caw_86

    WTT Denali console for 60/40 bench

    Looking for a 60/40 bench, color and material doesnt matter, just no torn foam or stains
  12. caw_86

    brake booster part compatibility

    is there something different abut 88-96 brake boosters that would prevent them from fitting in a 97-98. notice the part numbers for replacements are different. I am looking at one made by tuffstuff that has fitment from 88-93.
  13. caw_86

    Moving front disk to rear

    i was searching today for how to fit 15” wheels with gmt800 rear disk brakes. I came across several videos that junked the nbs rear disk and put a front disk from a gmt400 on the rear of a gmt800 with a bracket from some company. I have a 14 bolt 9.5 im building, im thinking this could work...
  14. caw_86

    Cast iron front diff

    I took apart my front diff out yesterday, out of a 98 tahoe with autotrac. was it normal for the long axle housing to be cast iron and the main housing aluminum
  15. caw_86

    Hammerhead armor bumpers

    anyone have any review of these bumpers They are american made. And on huge discount right now on manufacturers website. $2557 shipped for front and rear bumper
  16. caw_86

    holley has street fire distributor on clearance this weekend

    https://www.holley.com/products/clearance_parts/parts/55923 only $83 plus tax and shipping
  17. caw_86

    Upper manifold install

    The manifold is pressed all the way down, but it looks like a gap still exist between the injector and manifold. Is this fully seated or does it some how get pushed flush with that lip
  18. caw_86

    Wheel fitment

    These are the wheels i want, but not sure what would cause them to “not fit” according to websites fitment, they are black rhino aliso
  19. caw_86

    vortec heads

    in the near future i plan on replacing the head gaskets, cleaning and replacing worn parts. couple questions as i dont really know where to start. obviously if something fails a visual inspection it should be replaced but i dont think anything should be wrong, nothing has led me to think there...
  20. caw_86

    Power steering fitting

    i give up, i searched and searched the forum for an answer. does anyone know the fitting size that goes into the steering gear box, 98, not sure that matters thanks
  21. caw_86

    88-94 Metal dashboard being made, come give opinions

    https://m.facebook.com/marketplace/item/920549205863491/
  22. caw_86

    engine hoist

    any recommended engine hoist to use for pulling an engine from stock ride height, facebook marketplace people want brand new prices it seems for used equipment. mainly lift capacity and boom length
  23. caw_86

    transmission range switch question

    im preparing my bin file for when i get to my 411 swap into my 98, the software im using is tunerpro, which has the option to adjust the "transmission range switch/gear indicator type". on the lextech spreadsheet he mentions about tuning out this as its not needed, or splicing wires if it cant...
  24. caw_86

    throttle temp sensor

    i can not for the life of me find a part number for the L31 throttle body temp sensor, all im looking for is the temperature range its rated for, dont need to order one.
  25. caw_86

    LsFab and LGbilletUSA

    both these companies sell practically identical parts. anyone know where these parts are coming from or whats the deal with both selling the same design edit: another website https://azproperformance.com/collections/billet-parts-88-98-obs https://obssuperstore.com/collections/billet-parts

Latest posts

Staff online

Members online

Total: 1,331 (members: 14, guests: 1,317)

Forum statistics

Threads
64,334
Messages
1,391,489
Members
51,439
Latest member
sherberto

Share this page

Top