Search results

  1. BC K1500

    NP246 compatibility?

    By car I meant an 02 Yukon. :)
  2. BC K1500

    NP246 compatibility?

    I know it's been a while but I just want to share that I bought it and it bolted up fine, and works great. I was worries they might be the output shaft could have a different spline count or something like that. Thanks
  3. BC K1500

    NP246 compatibility?

    So I got a clear picture of the tag. The only differences are the "Assembly Numbers". Does the assembly number matter? It is supposed to be from an 02 yukon of off a 4L60E. I would think it should mate well to my 98 k1500 Suburban as long the decoder is the same? Am I overthinking this?
  4. BC K1500

    Curious if anyone else had this issue....

    My apologies ify reply is redundant but I didn't read all the replies. I have a similar problem. What happened is last year some crackhead broke into my truck tried to break the ignition lock and messed it up. I had to replace the ignition lock. Ever since if I tilt the steering wheel up I...
  5. BC K1500

    NP246 compatibility?

    Hi, Could anyone chime in on transfer case compatibility? My TC is the one with the clean decal the one I'm looking to replace it is the dirty one. I asked the seller for a clearer picture but in the main time does anyone know if the two are interchangeable? According to the seller it is from a...
  6. BC K1500

    Vortec 5.7 expansion plug size?

    Just an update. The the 1-5/8 plug worked. Surprisingly, everything vent smooth. Finished the job in about two hours. Thanks
  7. BC K1500

    Vortec 5.7 expansion plug size?

    I forgot to mention that I'm in Canada, yesterday was a holiday and Lordco was the only parts store that was open. I was a bit confused as there seem to be different sizes of plugs available. They said their catalog doesn't tell them what size of a plug I need. I should measure and tell them...
  8. BC K1500

    Vortec 5.7 expansion plug size?

    Hi, Does anyone know the correct expansion plug size for a 1998 GMC K1500 Suburban? I'm looking for the one on the left side by the oil filter where the engine heater is sitting. It started leaking really bad and I need to plug it ASAP, I can not drive it like that. Ill just delete the engine...
  9. BC K1500

    4L60E rebuild. What did I get myself into...? :P

    Sorry for not replying sooner, life got busy and other things came up, etc... I have the deep pan. Thanks for the tip about welding a nut on it. I don't have a welder but I believe I can arrange something for the next fluid change. As for the shifting, Everything shifts nice and smooth, only...
  10. BC K1500

    4L60E rebuild. What did I get myself into...? :P

    It is mostly ferrous mostly. Also there is a few crumbs of some old petrified O rings in the filter, It makes me think that most of the stuff was probably sitting in the cooler and just didn't get flushed out by CoolerKleen as it was more of a flow trough than pressure. Is that possible? I...
  11. BC K1500

    4L60E rebuild. What did I get myself into...? :P

    I wasn't doing a flush. I just wanted to change the filter and replace whatever fluid was in the pan.
  12. BC K1500

    4L60E rebuild. What did I get myself into...? :P

    Just wanted to update this thread as I have put in over 3k on the car since the rebuild. I just recently changed the ATF and filter. I opened the filter and found some metal shavings, I hope this is normal after a rebuild? Otherwise the transmission is running strong no problems. :rockit...
  13. BC K1500

    Has anyone managed to do a DIY cabin filter?

    You are most likely right. I'll still going to take the blower out and see if there is any way to MacGiver something.
  14. BC K1500

    Has anyone managed to do a DIY cabin filter?

    I'm sure its a great air purifier, but it doesn't solve the problem of the huge amount of dust that still enters the cabin. It looks like it is very hard to do or people just don't care to share their attempt as I can't find much online about this. I'll take the fan out and see what can I do...
  15. BC K1500

    Has anyone managed to do a DIY cabin filter?

    I Have a 98 Suburban that I originally bought for driving on forest service roads. What I totally didn't think about is the lack of cabin filter. The roads I'm driving are absolutely horrendous when it comes to dust. The entire interior and my stuff is constantly covered in dust. Has anyone...
  16. BC K1500

    4L60E rebuild. What did I get myself into...? :P

    It's been a while... I was working on rebuilding the transmission on my spare time, having the holidays didn't help, but its finally done! I just want to shout out a big Thank you to Tayto!!! and of course everyone else here. He guided me trough the process and helped me whit all my ***...
  17. BC K1500

    4L60E rebuild. What did I get myself into...? :P

    It looks molded. I didn't think the seal can be replaced but it's the revers piston I think. Should be still good I guess.
  18. BC K1500

    4L60E rebuild. What did I get myself into...? :P

    The piston looks ok. I won't use the 3-4 steels. I already ordered the .077 ones. I was thinking reusing just the steels from the other clutches.
  19. BC K1500

    4L60E rebuild. What did I get myself into...? :P

    I updated my shopping list one more time. Shopping list. The changes I made; I switched to a seal kit whitout clutch packs but has the molded pistons included in the kit. Added the BORG-WARNER 34036KIT, I already ordered the .077 3-4 plates and will reuse the rest of the existing steels whit...
  20. BC K1500

    4L60E rebuild. What did I get myself into...? :P

    Finding those steels seems to be quite challenging. Would this be the right plate to buy? https://www.ebay.com/itm/274738803866 Thanks.
  21. BC K1500

    4L60E rebuild. What did I get myself into...? :P

    I would definitely would like to keep the cost down but it seem like there is no way to do a good job and spend less than 1k on parts +TC. I find it weird that RockAuto sells everything but clutch steels?! Maybe I'm missing the point here but wouldn't it be easiest if I order This rebuild kit...
  22. BC K1500

    4L60E rebuild. What did I get myself into...? :P

    It's a metal tube, looks fine. I don't think I need to replace that. Thanks.
  23. BC K1500

    4L60E rebuild. What did I get myself into...? :P

    This is my shopping cart as of now; Rockauto It looks like it won't be cheap. Anything else I need to add to the list? I couldn't find a set of the molded pistons. It looks like I'll have to buy them separately. Does anyone have a link to a set of those? Thank you.
  24. BC K1500

    4L60E rebuild. What did I get myself into...? :P

    I figured it out after a bit of logical reasoning. :cool: Would you mind sharing what book is that picture from? Thank you.
  25. BC K1500

    4L60E rebuild. What did I get myself into...? :P

    I have not thought about replacing those parts but it makes perfect sense, I'll put them on my list. Thank you. It took me a while to figure out what we are doing here. I think I was able to find the (7) .080" Borg Warner "HE" High Energy frictions Is this the right part? Do I need 7 of these...

Latest posts

Members online

... and 24 more.
Total: 1,420 (members: 74, guests: 1,346)

Forum statistics

Threads
64,304
Messages
1,390,914
Members
51,370
Latest member
Rickslick82

Share this page

Top