Search results

  1. whiplash473

    *Complete Exhaust?*

    Hey guys. The exhaust on my truck has been rigged so many times now it's just time for a new system. I thought a few years back there was someone on here with a 'burb that bought a complete system that was made up of a bunch of pieces he welded together. Does anyone know of any place online that...
  2. whiplash473

    *Anyone Built Their Own Axles/Diffs?*

    As the title states, I'm wondering if anyone on here has just done everything themselves as opposed to hunting down a used 14 bolt (etc.) and whatnot. It's something I'd be perfectly capable of doing, I just don't know where I'd start. The main reason being that I just re-geared my 10 bolt...
  3. whiplash473

    *Tined Tails (Not NiteShade)*

    It's time to get rid of these since they've been sitting in the garage for a while they're factory lenses, I tinted them with tinted PPG clearcoat. The bulb board in the back works just fine but a screw is broken off the plastic boss ( as shown between my fingers in the second pic ). I'd like to...
  4. whiplash473

    *WTB: Driver's Side Mirror Glass*

    Kicked a rock right into the center of my driver's mirror and cracked it. So I'm looking for a new glass for it. 1998 with stock non-tow mirrors. Thanks. Sent from my bored/stroked iPhone 6S
  5. whiplash473

    *Code PO308 Even After Tune-Up*

    As the title says - I just didn't a complete tune-up and still have this 308 code (cylinder 8 misfire). I cleared the codes after the tube-up just to see if it came back and it did. Any ideas on where I go from here? I was thinking it could be an injector since they're original. I did a search...
  6. whiplash473

    *Running O2 Sensors Properly Without Cats?*

    I'm looking for a way to run my O2 sensors correctly with long tubes and no cats. I have a couple friends that have thrown MIL eliminators on their Mustangs to make the computer think the O2s are reading correctly (I don't have to go through emissions with my Mustang so no cats) but I'm...
  7. whiplash473

    *Manifold Gasket?*

    ive never had the exhaust manifold off my truck so I don't know. Is there a gasket between the manifold and the downpipe? I developed an exhaust leak and that's where it's coming from. I figured I'd ask before I tear into it. Thanks.
  8. whiplash473

    chrmaka | 100%

    Just bought a complete intake setup (all the plastics) from him for a great price. Thorough transaction and an overall great guy to deal with. Thanks again, man. EDIT: I don't know if GMT400 has a feedback system where each member has a percentage that averages out from other members but I...
  9. whiplash473

    *WTB: Intake/TB Box*

    I'm not sure what, or if, there is a technical term for it but mine has been all busted up for years. The other thing I need is the intake box. I don't need the box itself, but the piece of it that actually sits on the throttle body. As long as it has the clip to hold it on the throttle body...
  10. whiplash473

    *Stock Speaker Upgrade Help*

    I'm to the point of upgrading my factory speakers since my stock front door subs are showing they're age. I have the door panel off and just saw the driver's sub is cracked/torn. I've been putting off a speaker upgrade simply because it was still working and sounding good with my Alpine stereo...
  11. whiplash473

    *The Whiplash Build*

    Instead of loading other threads with pics I just assume start this thread which I can go back and show the truck's progress when I get to a computer. Here it is now and today the girlfriend and I headed to Dekalb for her sister's high school graduation. I think this is only the second picture...
  12. whiplash473

    *FS - M/T Classic II / Falken 33s*

    Selling my 33s, I have no use for them anymore. They're are Mickey Thompson Classic II wheels (16"x8", offset and backspace specs I don't remember but they're on their site) and Falken Rocky Mountain ATS tires (285/75/16, load range D). They actually measure out to like a 32. I recently got a...
  13. whiplash473

    *LED Light Bar(s) Behind Grille?*

    I'm looking to get rid of my 52" mounted under my front bumper and don't want it over the windshield. So I was thinking about mounting two 18" or 20" curved bars behind my grille. I doubt there's room with the support in the middle but I was curious if anyone had done it and if they had any...
  14. whiplash473

    *WTB: '98 Style Chrome Grille*

    Mine got all busted up a couple years back when I slid into a guard rail. Anybody have one? EDIT: If anyone has a GMC grille, I might be open to switching it over. If so, will my head/running lights mount ok in it?
  15. whiplash473

    *3.42s And 37s Temporarily*

    I'll be done with the lift kit in a couple days and Mothers Day weekend in driving with the girlfriend down to Southern University to move her brother home for the summer. It doesn't look like I'll be able to regear it in time so what's the thoughts on running my 3.42s for the weekend with my...
  16. whiplash473

    *WTB: Front Sway Bar*

    I need a front sway bar, mine is cracked. If anyone has one please let me know ASAP. I'm not sure if they differ but my truck is a '98 1/2 ton 4x4. Sent from my bored/stroked iPhone 6S
  17. whiplash473

    *RCX 6" Lift Install*

    Pertaining to the rear: Am I going about this correctly in that the add a leaf is installed here where I'm aiming in the pic? The second question I have: Anyone else that's fine this, were your torsion bar keys adjusted evenly? Mine were about 3/8" different with the driver's side being...
  18. whiplash473

    *WTB: Headers For 350ci*

    Looking for a set of headers for my truck. I don't really have a preference to shorties to full length. I'm modifying the entire exhaust system so if someone has long tubes then great, if not then no big deal. Sent from my bored/stroked iPhone 6S
  19. whiplash473

    *RCX 6" Installation T-Bar Question*

    So I finally got around to getting the RCX 6" kit along with wheels/tires. It's been a long time coming so I've had a few years to do my homework on the installation. What I'm wondering is: Should I mark the TB key bolt threads along with the TB hex's at each end to make sure I get everything...
  20. whiplash473

    -:Stock muffler, free:-

    I just assume give someone this if they'd want it instead of me scrapping it, which will be next weekend. If anybody wants it let me know. It's in damn near perfect condition. Sent from bored/stroked iPhone 6 Plus
  21. whiplash473

    -:Wanted: Gauge Needle (92-94):-

    Hey, guys. I got a new cluster for my girlfriend's truck that has a tach. Problem is: Need an extra needle now. Does anyone, by chance, have one laying around? I suppose either a tach or speedo needle would work. Thanks in advance, folks.
  22. whiplash473

    -:Gauge Face:-

    Looking for a new gauge face for this cluster. If anyone has a new one or a used one that's already delegated from the cluster that would be great. Thanks, guys.
  23. whiplash473

    -:Light Bars, What Do You Have/Suggest?:-

    I was about to snag one online and decided to hold off to see what you guys have to suggest. Looking at getting a 52" or 54" for above my windshield. I can't justify spending "Rigid money" on this but I'm not gonna waste the money on getting a piece of junk either. For those interested, this...
  24. whiplash473

    -:Oakley Jawbone Sunglasses:-

    I have a few various pairs of Oakleys and never wear these, no point in me keeping them. They're not knock-offs, I actually still have the receipt if anyone wants a pic of it just let me know. The two lenses are Black Iridium and Fire Iridium. The Fire Iridium lenses have a bunch of knicks in...
  25. whiplash473

    -:4x4 Bedside Decal:-

    Bought it then decided to pull both decals off instead, waited too long to return it. LMC wants $50 for it so if someone wants it for $25 it's yours. Sent from bored/stroked HTC One

Latest posts

Members online

... and 14 more.
Total: 1,694 (members: 64, guests: 1,630)

Forum statistics

Threads
64,324
Messages
1,391,364
Members
51,426
Latest member
emullen

Share this page

Top