Search results

  1. T

    Adding Fogs Without Switch

    Haha no worries. Appreciate the response.
  2. T

    Adding Fogs Without Switch

    I also did the 4-High mod as well so I can’t see a reason for a switch. My thought process was using the splitter into the lows then anytime I turned on headlight they would be on, and with the 4-High they would stay on with high beams.
  3. T

    Adding Fogs Without Switch

    I’ve been searching the forum and YouTube and haven’t really seen this so wanted some input. I have a 90 K1500 and adding fog lights. I’m wanting to skip the fog light switch since the only harness I’ve seen is from RZ for $300. I have the Heavy Duty Headlight Harness mod done and I’ve seen...
  4. T

    New 10" Drums, Dragging Noise

    Not sure. First time doing drums so I'm sure I messed up somehow.
  5. T

    JB3 with larger piston calipers?

    Thanks. I saw your post on another thread outlining to ideal swap. It's a little outside my skill set to go that far for the hubs and steering knuckle. I've had the truck for a little over a year and had no issues with the larger piston calipers with the 1" rotors other than the shudder when...
  6. T

    JB3 with larger piston calipers?

    I have a 90 K1500 RCSB and had a slight vibration under braking. Decided to just replace the braking system so ordered the 1" rotors, ACDelco calipers 743/744 non hd, and pads to go with it. After pulling the wheel off, I saw that it had the HD calipers 745/746, but still had 1" rotors. Will I...
  7. T

    New 10" Drums, Dragging Noise

    Both new drums match, and they match the drums that were taken off. Not sure how the drum size could be wrong. I feel like I'm going to have to take it to a shop, get a new back plate and just get another new drum.
  8. T

    New 10" Drums, Dragging Noise

    Took the drums off and discovered the problem. Where the drum sits against the backing plate, it's rubbing causing that metal on metal sound. Now the question is, what did I do to cause this? The side that is damaged had the wheel cylinder go bad, could it have warped the plate, did I miss some...
  9. T

    New 10" Drums, Dragging Noise

    I did some searching, but couldn't find a answer. I replaced the drums/shoes on my 90 K1500 with the 10" lead/trail style. Never replaced drums before, so no clue if I missed something. I have this sandpaper on metal like noise while driving, goes away when braking. Did I not adjust the shoes...
  10. T

    Temp guage doesn't read while one

    It was that. I checked the one up top, didn't realize there was a second. Was also messing me spark plugs and must have disconnected it. Thanks for the help!
  11. T

    Temp guage doesn't read while one

    I have 90' Silverado with the moonie guages. I recently installed a little under seat self powered subwoofer, everything was fine on test drive. Went out today my temp guage never moved. When I turn the truck off it moves to normal operating temp. Any ideas on if this is a guage issue, sensor...
Top