Search results

  1. R

    Blueprint 383 crate motor?

    I did talk to my machine shop guy and he said he would magnaflux them whenever i show up if they are clean so we can find out. I haven't done anything with the truck just yet, Still farting around with ideas.
  2. R

    Blueprint 383 crate motor?

    my thoughts exactly. probably going in a and doing the injector update as well. and obviously update to the better intake gaskets.
  3. R

    Blueprint 383 crate motor?

    Good point about just getting a new head probably both sides while im at it. Really need to take the upper apart anyways either way and replacement cast iron heads from summit like stock are relatively cheap compared to a crate.
  4. R

    Blueprint 383 crate motor?

    Hi guys, Got a 00' k2500 ccsb 5.7L with 190000 miles on it. Ran ok but recently started stumbling on idle when in gear. Always wanted a little more balls out of this thing. Head gasket on passenger side is blown. That would explain my stumble. SOOOO the question is do I slap a head gasket on it...
  5. R

    Opinions on 383 crate motors

    how has that Blueprint crate engine held up over the years? Considering them for my 00' 2500 CCSB. Wondering if this is a road i should go down.
  6. R

    Decided to build a garage. Now the fun begins.

    I have about 15 of these in my 30x32 barn. They are amazing, cheap and so far have lasted 6+ years with no issues whatsoever.
  7. R

    3500HD handles/rods

    got mine installed. They all needed some mods and tweaking. worked well as soon as i was done. Only way i got a hold of him was messaging on facebook. He does not answer his contact form on his website.
  8. R

    Making new sun visors with mirror and light

    Here is a upgrade i did with the most recent sunvisors. it worked great! https://www.gmt400.com/threads/new-upgraded-sun-visors.52286/
  9. R

    3500HD handles/rods

    got the kit. they are super nice and very well built. They work perfectly.
  10. R

    3500HD handles/rods

    good news! ill hit him up on FB!
  11. R

    3500HD handles/rods

    did you ever get your set? Ive tried to contact him multiple times and gave an order for the rods the other day. Have not received a shipping notice in a week.
  12. R

    Finally a cabin air filter!!!

    worked very well. I have had no issues. I also haven't taken it apart so i dont really know how much its caught. Ive got it on the intake of my SXS though and it catches a ton of $hit.
  13. R

    Rust prevention

    check out Blasters Surface shield. Lots of videos of guys using that VS fluid Film and all think its better. I usually use fluid film as I can get 5 gallon buckets for nothing.
  14. R

    kodiak door handle kits!!

    Check this out! Been trying to get a hold of the guy. These look like very well put together kits. im planning on buying for my CCSB 2000. www.customobshandles.com
  15. R

    part out, 91 c1500

    what about the HVAC control? Price and condition?
  16. R

    Finally a cabin air filter!!!

    Finally figured out a way to have a cabin “air filter” on these trucks. Long story short just got done pulling and swapping my dash and all new components in the HVAC system. Surprised by the crap that gets lodged on the accumulator(then it smells). Finally figured I would do something about it...
  17. R

    Engine stumbles but only in drive

    Yep it’s a vortec I’ll start with fuel pressure.
  18. R

    Engine stumbles but only in drive

    I’ll check out the IAC valve. Maybe it needs cleaning. Just weird it only happens in drive.
  19. R

    Engine stumbles but only in drive

    No unfortunately it hasn’t been warm enough in goofy Ohio yet lol!
  20. R

    Engine stumbles but only in drive

    Ok well this is a new one for me. I have a 2000 k2500 crew cab sb. Small block 350 engine. Truck runs awesome but sometimes when I’m in drive and sitting still the truck with lug down to just above stalling then over compensate and rev up slightly. It won’t go till the point of dying. When you...
  21. R

    New upgraded Sun visors!!!

    I’m not sure. If it has the same exact base for the visor like mine did I don’t see why it wouldnt.
  22. R

    New upgraded Sun visors!!!

    That snap ring will make sure that the post does not fall out of the hole since you dont have fingers holding it in like before. Now go back to your truck and install them just like the old ones. I reused my clips that hold it in place and the electrical hookup is exactly the same and works with...
  23. R

    New upgraded Sun visors!!!

    Should look something like this. Now take that and place it on the new visor post. Now grab you a 7/16" external snap ring. If you dont have these no worries Harbor Freight sells a 300 piece kit for like $6.00. this is what you should be looking at. Take and push it down slightly while placing...
  24. R

    New upgraded Sun visors!!!

    I have an awesome upgrade i did to the horrible excuse for visors GM put in our trucks. I have a 2000 K2500 CCSB LS version that had the special sunvisors placed in suburban's. They sagged down over the years with the cardboard inner body. I absolutely hated how they didn't sit flush with the...
  25. R

    Double Din install '99 Suburban

    I did my new double din install on my 2000 k2500 ccsb. Bought the new NEX pioneer with wireless apple car play. Also it’s an awesome setup because it’s half the depth of the standard double din units. I did absolutely no trimming on my dash as everyone else has to do. Makes the install much...

Latest posts

Members online

... and 14 more.
Total: 1,652 (members: 64, guests: 1,588)

Forum statistics

Threads
64,341
Messages
1,391,579
Members
51,451
Latest member
Swift

Share this page

Top