Search results

  1. canadakustom

    GarrettGmc's 94 ecsb

    Glad you decided to ls swap it . I just finished doing one in my 98 and couldnt be happier with the power gains from my 305 vortec.
  2. canadakustom

    My 92 silverado

    Look into an LS swap you will enjoy that much more. I gave up on sbc they are a thing of the past
  3. canadakustom

    Just joined here’s my suburbans. Loving this site

    I like that two tone one alot. Looks great with the nbs rims on it ..
  4. canadakustom

    Ls swap underway! What to do with old wiring?

    I removed all factory wiring from my truck laid it out on the floor. Took all the wire loom off, then started cutting out all the wires that used to control the factory motor. So what i was left with was guage wires, 4x4, and prnd selector wires.
  5. canadakustom

    The Member Truck Thread

    dropped a 4.8 lr4 in the old girl.
  6. canadakustom

    Rusty cab corners

    Im not sure why they rust so easily but ive noticed that some color schemes seem to be worse than others. Id say this pewter color is the most prone to rusting. I got a 1993 2wd in the same color and its right rusted out
  7. canadakustom

    Rusty cab corners

    Heres a few more pics before i pulled her into my make shift paint booth Had to clear the taillights while i was at it.
  8. canadakustom

    Rusty cab corners

    If i have one bad thing to say about the body on a gmt 400 it would be that the ext cab corners rust way to easy.. So i had to take action and cut that rust outta there and weld some new metal back in. Heres my temporary repair job i took aluminum tape and a can of rocker guard to the...
  9. canadakustom

    4l60e blowing oil out of dip stick??

    Ya my tranny problems are solved. If i were you id check the breather hose on top of your trans
  10. canadakustom

    New guy from Canada.

    haha im lerking around reading threads getting info....
  11. canadakustom

    Show me your LED's!

    just some lights
  12. canadakustom

    Carnage and Stuck Pics

    ya he was fine wasnt going to fast, however he was going fast enough to hurt the truck. He was driving a standard with an air cast on his foot so it had disaster all over it. I tried pulling him out but counldt move it had to go back to town and get buddy with a tow truck.I ended up blowing a...
  13. canadakustom

    97 into 95

    I believe the 305 in your 1995 would be a tbi (thats what mine is) and the 350 in the 1997 is a vortec. So i would grab his ecm and the wiring harness just to keep the vortec. Ive never tried this however but im sure it can be done. As far as throwing your tbi intake on the vortec heads i think...
  14. canadakustom

    Factory keyfob/keyless entry

    I need to know more about this as well my glove box gives me RPO code AU3. And i want keyless entry. So i guess is what i want to know is can a guy just got to the junk yard and get any fob from a 96-98 truck and try to program it or do i need to know what frequency the key fob is running on?
  15. canadakustom

    Carnage and Stuck Pics

    Buddy can over a hill and didnt know the road was washed out
  16. canadakustom

    Front and rear buckets in a crew cab? Thoughts?

    And this is why i want a crew cab, the ext cab on theses trucks is good to store random stuff.
  17. canadakustom

    Upper corner lights

    They look something like this turned off
  18. canadakustom

    Upper corner lights

    haha go right ahead i think it looks awesome and i want to see pics when your done!!
  19. canadakustom

    Upper corner lights

    heres a few pics of mine
  20. canadakustom

    Post Your Setup and How You Use It!

    Year: 1998 Make:gmc sierra Model: slt Gear size:3.73(needs a re-gear) Tires: 275/65/20 Wheel Size: 20 inch eagle alloys Lift kit size and Brand: rcx 6 inch lift (front keys cranked) Coil Spacers: None Wheel Spacers: kinda want some Lift Blocks: rear lift blocks Add-A-Leafs: yes its rough...
  21. canadakustom

    SuperChips flashpaq

    I got one of thoses super chip programers, however i sold my old truck with it still vin locked. NOw i gotta figure out how to get it reset for the my 98
  22. canadakustom

    4l60e blowing oil out of dip stick??

    I run gear oil in the transfer case no big deal and i figured out my problem, the filter was very dirty so i believe it caused the tranny to get hot and ended up blowing the lower trans cooler line off. So i got rid of the factory plastic clip junk and ran a rubber hose and fitting in its place...
  23. canadakustom

    4l60e blowing oil out of dip stick??

    yea i checked the transfer case and it still has all of the gear oil in there. the trans was not over filled it was right under the full hot line last time i checked it with the tranny hot. The fluid that is sprayed all over the frame of the truck looks red still lol. I was almost wondering if...
  24. canadakustom

    4l60e blowing oil out of dip stick??

    I was just about home after a 400 km drive when my transmission decided to blow all of the oil out of the dip stick hole. I was wondering if anyone had experienced this problem before and what the cause could be. Ive checked the breather tube on top of the trans and the tranny cooler lines for...
  25. canadakustom

    What Kind of Rims do You Guys Have?

    Eagle alloys on mine

Latest posts

Members online

... and 20 more.
Total: 1,566 (members: 70, guests: 1,496)

Forum statistics

Threads
64,316
Messages
1,391,268
Members
51,415
Latest member
47venture

Share this page

Top