Search results

  1. 8

    W/T front end trucks headlights

    kit from summit.. https://www.summitracing.com/parts/hla-003427291
  2. 8

    7.4L Vortec Distributor Suggestions?

    I've run the Summit one for 7 years now. It's a great piece.. .. That best performance looks like a great piece as well..
  3. 8

    LOUD rattle when engine starts

    You soooooooo! have an internal problem.. First just to be sure take the belt off, fire it up see if noise is still there ... that will rule out any accessories.. It really sounds like a pushrod banging away though. Take the valve covers of to see if something is broken or has major...
  4. 8

    Have to bump throttle to keep running. Won't run at any steady RPM.

    For fuel pressure an easy way is to make a t -type fitting at the fuel filter. It's much easier than trying to hook up behind the throttle body. The TBI doesn't have a schrader valve. Solus pro would work if you have the obd 1 attatchments . My prospects from what you describe I would lead to...
  5. 8

    CEL Codes, and a misfire.

    OK ,now we know more. Yes, with popping through the exhaust you have a timing issue for sure. However.... did you remove the heads or rockers? If you did your lash my not be right on some of them and that can cause some of the symptoms you describe.. Usually for the 1345 code crank sensor...
  6. 8

    CEL Codes, and a misfire.

    You should reread what you wrote because that is what it implies.. You didn't define it.. and where is the whole knock thing coming from?? Since when is misfiring a knock? A broken mount is not going to bang around and KNOCK during idle a bunch of times and at a steady acceleration.. Only...
  7. 8

    Fuel delivery issue 1997 k2500 7.4 vortec - random not starting

    I'm with him.. I think you have a wiring/ground problem possibly causing the pump failure..
  8. 8

    Show off your valve covers and engine bays

    454!!!
  9. 8

    454 engine swap

    Not to mention HP and torque.. I would do all I could to maintain the Gen6 . All that effort just to go backwards in the end you will probably be disappointed .
  10. 8

    CEL Codes, and a misfire.

    Ok I've been working on cars for 30 years. You are going to have to explain to me how a motor mount is going to cause these codes or any on a 7.4 ..
  11. 8

    CEL Codes, and a misfire.

    You really are going to need some type of scanner to get some sensor values. Even most of the cheap ones show data.. That's what leads to figuring out what's going on.. The data is important. DO you actually have a misfire(like codes?)or just feels like it's missing? Scanner data would...
  12. 8

    Aux. front end lighting; Can we see photos of truck front ends with additional lighting?

    Shaboom!! PIAA fogs.. They are your best friend in white out conditions..
  13. 8

    Chasing P0302

    I would agree with that.. That's getting low. stock is around 150ish psi with about -20 psi for max tolerance.. according to my service manual.. Check it again and if the same, proceed with a leak down test before you throw any parts at it..
  14. 8

    p0174 454 vortec

    Usually with something like Besides checking misfires and the graph. I like to double check all of the ignition parts. Loose plug wire, loose plug backing out, wires rubbing thru ,wires snug on cap, cap solid on it's base . You would be suprised at how that one can get you.. Then kind of...
  15. 8

    It runs...but still an issue

    Yep, get it HOT!! Will take some time .. Unless you drove around a long time before you fixed it. If the cats were exposed to coolant for a long time (like days of driving around) then they may be compromised.. Go hit the highway for a while..
  16. 8

    '97 L29 ---Annoying Idle

    usually cutting out on mid to high acceleration like when you are almost out of gas, long crank times when starting.. when cutting out it would set a code right after. Becoming more problematic over time maybe. Mine was bad for a while ,but took a little time to figure it out it would only...
  17. 8

    Squishy brakes won't go away!

    From what you describe I would agree that it really sounds like the rears are out of adjustment or you still have more bleeding to do.. Some times it just take a bunch of times to get all the air out. Maybe double check the wheel cylinders for fluid weeping or overextended.. Unfortunately we...
  18. 8

    '97 L29 ---Annoying Idle

    So I have an aluminum distributor. Made in china like everything else we buy. The internals were far better built than the stock one and cured it's faults. Going 7 years strong now. I do have a BILLET distributor for my Trans Am . It's just the housing, MSD makes it and wasn't all that...
  19. 8

    '97 L29 ---Annoying Idle

    Pretty much any scanner will read the values. Some just more detailed than others.. Not a code reader , but a scanner..
  20. 8

    '97 L29 ---Annoying Idle

    I have a Solus PRO updated to 2010. Man, I paid a lot more for mine years ago.. Mine will do the ABS Bleed for the K2500..l It works good being bi-directional and has come in handy , but shows its age now.. That whole changing keys thing really turns me off.. Some cars when working on...
  21. 8

    '97 L29 ---Annoying Idle

    There are some free or low type cost scanners on the internet you can download to a phone or computer.. I've seen them in action on youtube. Not perfect ,but could get you close. I know with some idle issues it will very rarely show up in a scanner graph unless you really know what you are...
  22. 8

    Stepside beds and dually fender repair. SMC not fiberglass..

    You can use the West Marine epoxy system to fix them. It works well. Can even make a filler out of it.
  23. 8

    '97 L29 ---Annoying Idle

    Years ago when I first got mine it did a similar thing. Warm idle at light would have this suttle miss. Did everything you did. Even had some shops give it a go and nobody could figure it out. Had the injectors flow tested ,they seemed good. They were cleaned and checked out ok.. So just...
  24. 8

    W/T front end trucks headlights

    I have the HELLA conversion on my truck with the lower wattage bulbs that it came with. I didn't even know there was a "bigger" bulb until a little while ago. Might try it. That kit was top notch. The Assembly is very well built. They work pretty good.
  25. 8

    NBS Front Brake Swap for OBS Trucks

    I do not.. They aren't hooked up yet.. The old Denali hardware was toast and nobody intown at the time had all the pieces to put in there the day I was working on it so I left it out.. Once I drive it around and get a feel for the system then I will figure a way to adapt them and just...

Latest posts

Members online

Total: 1,339 (members: 30, guests: 1,309)

Forum statistics

Threads
64,333
Messages
1,391,480
Members
51,436
Latest member
Shawnnaser56

Share this page

Top