Search results

  1. Keeslinger31

    Shackle flip with body lift

    It’s just a regular u joint so right now I’m only 1 degree off with the short shaft being 8 degrees and the pinion at 9 I’ve read through the options for 2 piece shafts in that link I posted. I think option 3 might work with making the two operating angles for the two rearmost u joints match...
  2. Keeslinger31

    Shackle flip with body lift

    It’s off the 3500 I got the 4l80 and transfer case from I had it shortened to fit if anyone has any advice on what angles I should shoot for with the two piece I’m all ears
  3. Keeslinger31

    Shackle flip with body lift

    Just reading this is confusing not sure what is the best way I guess I’ll figure it out eventually https://www.4crawler.com/4x4/CheapTricks/Driveline-101.shtml#2-Piece
  4. Keeslinger31

    Shackle flip with body lift

    I’ve got 4 degrees on the case yoke 8 degrees on the first shaft 11 on the second shaft 9 on the diff yoke I think I’ll raise the csb to get the first shaft at 7 then a 3 degree shim to get the diff at 10 that should get me less angle on the u joints I could be wrong on the relation of the t...
  5. Keeslinger31

    Shackle flip with body lift

    It’s a two piece shaft
  6. Keeslinger31

    Shackle flip with body lift

    Got them in swapped the pinion to a 1350 u joint one and with 4 degree shims I have 9 degrees on the pinion Might have to go with 3 degree shims I haven’t quite decided yet
  7. Keeslinger31

    Shackle flip with body lift

    Perfect! Exactly what I was looking for That does look really good! I haven’t finished installing mine yet I decided to clearcoat them because the welds looked so good About to order the u bolt flip the shims and axle relocation plates as soon as I figure out what degree shim I need. Did...
  8. Keeslinger31

    Shackle flip with body lift

    I got the wfo brackets mostly because they come with the shackles. Yes you have to knock the bracket off first then cut again. The rivets are surprisingly soft, regardless very good info thank you
  9. Keeslinger31

    Shackle flip with body lift

    Yes I hate autocorrect as well I ordered the shackles we shall see what the result is
  10. Keeslinger31

    Shackle flip with body lift

    Forgive my ignorance but what’s is SADs? Solid axle somethings? I looked it up but didn’t find anything But you are saying that the pro Comp leafs aren’t too bad. I had considered them I just wasn’t sure if they would last or how they rode the jeep guys dont seem to be a fan Did you notice a...
  11. Keeslinger31

    Shackle flip with body lift

    darn well thanks for trying
  12. Keeslinger31

    Shackle flip with body lift

    Ya with the two piece shaft I need the pinion not to be angled up as it would with a one piece shaft The blocks are 5” 6 degree small end to the front they worked fine with the 4l60 and np241 with the slip yoke but I swapped in a 4l80 with the borg 1 ton transfer case which has a fixed yoke...
  13. Keeslinger31

    Shackle flip with body lift

    Someone with flip shackles and a 3” body lift
  14. Keeslinger31

    Shackle flip with body lift

    Anyone have any pictures with a 3” body lift? 94 k1500 Ecsb I currently have 5” tapered blocks Reason for change. 4l80e and 1ton borg tcase had the two piece shaft from the donor truck shortened. Need the axle pinion to go back down 6 degrees for proper angles Looking at doing WFO concepts...

Latest posts

Members online

... and 24 more.
Total: 1,419 (members: 74, guests: 1,345)

Forum statistics

Threads
64,304
Messages
1,390,914
Members
51,370
Latest member
Rickslick82

Share this page

Top