Search results

  1. fastfreddys454ss

    Wipers won’t shut off

    Going back to my wiper problem. When my wipers are on all the time with the switch turned off and keys out of the ignition. After replacing 2 wiper motors with modules and 2 wiper switches. Has anyone had this problem before or know what else to look for.
  2. fastfreddys454ss

    Wipers won’t shut off

    I wish it were as simple as a fuse. Unfortunately the fuse only goes in one way. I first disconnected just the white wire and it turns the wipers off. Then put it back in and they start running again. After that I disconnect the gray wire and it stops the wipers. Hook it back up and it also...
  3. fastfreddys454ss

    Wipers won’t shut off

    I have a 1990 Chevy truck with intermittent wipes. My wipers run all the time even with the switch turned off and no keys in the ignition. Theres no park or intermittent control either. It run at low speed all time .The only thing I can do is go from low speed to high speed. Without the ignition...
  4. fastfreddys454ss

    My 454 SS build

    Got the profile prism halos in today. Got tired of seeing dim halos ,weird designs, and expensive prices. Don’t know what they were thinking with most of the halo headlight bucket designs for the OBS. So I built my own.
  5. fastfreddys454ss

    My 454 SS build

    Finished the dash repair today. Just have to wait and let it dry 24 hour. Then clean up all the bondo dust and put everything back together
  6. fastfreddys454ss

    My 454 SS build

    Installed some wamrods hood struts. I like them, but I just have to be careful I don’t bump my head on the hood. The hood doesn’t open up as high. I might move the bottom mounts back a little bit. If that doesn’t work I may order longer struts.
  7. fastfreddys454ss

    My 454 SS build

    Got the c type tail light in today.
  8. fastfreddys454ss

    My 454 SS build

    Trying J B Plasticweld putty to repair dash. So far so good. Next the fun part. Sanding and painting.
  9. fastfreddys454ss

    Car stereo in dash pocket

    Sorry wasn’t sure what kind of experience you have. I am definitely interested In what you come up with.
  10. fastfreddys454ss

    Car stereo in dash pocket

    There’s no way with 1st, 3rd and 5th gear you will be able to get a center console if front of the shifter boot. Your best bet is a single din radio bezel. If you haven’t done one before. You don’t have to cut the dash out. You just have to reused your heater vents and bezel clips. You can order...
  11. fastfreddys454ss

    Car stereo in dash pocket

    Next is dash repair. Made some plastic tabs and used some pvc cement to hold it in. I think I going to try some j b plasticweld putty or thicken up the pvc cement by leaving the cement can open so the acetone evaporates a bit. Then do a body work, sand it and paint it with some colorbond
  12. fastfreddys454ss

    Car stereo in dash pocket

    I already posted this in street build, but wanted to finish this thread. I installed the retrosound M4 stereo, put in the rear view safety 5” monitor in the console with the a license plate reverse camera and clean up the center console
  13. fastfreddys454ss

    My 454 SS build

    Next also going to remove my current led tail lights and install new c type leds. But haven’t decided if I will tint them with some VHT nite shade or not. I think I put them in first and then figure out what I will do after I see then on the truck.
  14. fastfreddys454ss

    My 454 SS build

    Next week I’m putting in new profile prism rgb fitted headlight halos from Led concepts with a little customization. Not a very good rendering, but you can get the idea of what I’m going to do. I will make a full write up next week on how to put them in after I’m done. The old spyder halo head...
  15. fastfreddys454ss

    My 454 SS build

    Next I partially glued in the part of the dash I cut out for the double din radio.with pvc cement. After it dries I will thicken up the pvc cement by leaving the glue bottle open so the acetone evaporators inside the can. Turning it to a paste to fill in the cracks.Then do a little body work...
  16. fastfreddys454ss

    My 454 SS build

    Installed the retrosound M4 stereo, put in the rear view safety 5” monitor in the console with the a license plate reverse camera and clean up the center console
  17. fastfreddys454ss

    Car stereo in dash pocket

    To take care of the rear camera issue. I bought a 5 inch screen with a flush mount and a rear license plate camera from Rear View Safety. Going to mount the screen in the center console were my switch panel is right now. Then move my switch panel to the lower part of the console in front of the...
  18. fastfreddys454ss

    Car stereo in dash pocket

    Then I bought a retrosound m4. That has everything I need. It fits in the stock location. It has apple CarPlay, answers phone with a mic , has a 3 preamp rca’s (including the subwoofer preamp) and Bluetooth control thru my iPhone. The only things it doesn’t have is a touch screen and back up camera.
  19. fastfreddys454ss

    Car stereo in dash pocket

    I going to start buy removing my double din adapter. Do some dash repair were I cut the opening for the double din. Then put in the heater a/c vent bezel trim with a pocket that I got off eBay.
  20. fastfreddys454ss

    Car stereo in dash pocket

    Decided it was two much of an undertaking. You would have to add a couple inches to everything. This guy on Facebook used two instrument cluster bezels and bezel pads. Then body work then together. Looks pretty nice. Gm should have done this from the factory
  21. fastfreddys454ss

    My 454 SS build

    Used two marine style fuse boxes
  22. fastfreddys454ss

    My 454 SS build

    I also ran a 1 gauge hot and ground from the battery to the center console to power up all my accessories. With a Casper electronics junction box that has a cover and ground stud
  23. fastfreddys454ss

    My 454 SS build

    I also moved the wire mess from the glove box, cleaned it up and moved it to the center console. Then added a 250 amp accessory relay. Had to use a 250 amp because I have some accessory that draw a ton of amps
  24. fastfreddys454ss

    My 454 SS build

    Truck needed some wire cleanup around the battery
  25. fastfreddys454ss

    1991 Cheyenne restomod

    Your slosh tubs look really nice. I like the strut rods on the hood. Do you have a part number or do you know the length of the strut rods. I want to use your idea. Nice job on the build. Keep it up. Good job on the fabrication. Its got to be tuff and expensive getting parts from the United...

Latest posts

Members online

Total: 1,054 (members: 20, guests: 1,034)

Forum statistics

Threads
64,312
Messages
1,391,174
Members
51,395
Latest member
tjclar86

Share this page

Top