Search results

  1. Bone Shaker

    Cowl Hoods

    2” rise and got it from NPD fits good for aftermarket. N p d only bout 40 miles away so I don’t know about shipping. Stock hinges work good with this one. Good luck
  2. Bone Shaker

    Parachute hoods

    WOW.... I have been to 2 world fairs and a goat.......(well y’all know what I mean) and I have never seen anything like that! That’s crazy. Had to be some kind of factory defect
  3. Bone Shaker

    Cab corners, fu3k.

    Looks like you have got it under control. I know it was difficult with the bed still in place. Sometime that stuff is like cancer....you never know where it’s lurking or when it will poke it’s ugly head out.
  4. Bone Shaker

    Oil pressure..

    If you are going to prime it by spinning the engine I would recommend removing the spark plugs. This will let the engine spin freely and not let cylinder compression put things in a bind. Speed handle with straight bit always works for me. I think most assembly lube will suffice. I just use...
  5. Bone Shaker

    Vortec 454/no start after new distributor

    Easy way that’s worked for me. Put your finger over # cylinder spark plug hole and slowly rotate the engine. When you feel pressure starting to build t d c is coming up. Hope this helps
  6. Bone Shaker

    HVAC box removal

    I am sorry for what you are going through. I pulled my dash this summer to replace a leaking evaporator core. It was bad Day and 1/2 job for me but, I got it and a c working great. Just take your time take lots of pictures and don’t fool yourself into thinking you will remember cause you won’t...
  7. Bone Shaker

    Swap Meet Slam

    I don’t think we are on the same page. I am referring to the top shock mounts. I was just going by the pictures and the angle of the shock looks too flat. Got the top shock mounts from summit racing for mine. Only place I could get them
  8. Bone Shaker

    Swap Meet Slam

    I was gonna do the sway bar up grade front and additional in the rear. So you don’t like the rear? Maybe I save my money huh. Thanks for the info. I just run my truck on the street no track time but I sure think they look kool on the rear
  9. Bone Shaker

    Swap Meet Slam

    Just a couple? Looks like you are making great progress. Have you considered front sway bar upgrade and rear sway bar addition and also top shock bracket relocation mounts. They realign the shock to a straighter position to be able to work correctly. I have been where you are and I am going...
  10. Bone Shaker

    Big parasitic draw and already tested all circuits

    Just F Y I my dome light switch had a little piece broken off. Not enough to activate the lights but would cause a draw. Remove all interior light bulb and see if this stops it. If so replace them one at a time and wait a couple of days before you install the next one. It worked for me. I know...
  11. Bone Shaker

    Need body work suggestions

    I think these guys are right about the bed. Also the cab corner can be purchased from LMC truck. Need to be cut out and welded back. Body work requires tools and practice. If you have access to the tools don’t be afraid to try. Watch a bunch of YouTube and ask lots of ? Good luck.
  12. Bone Shaker

    Rear brake conversions to Disc.... Is it worth it?

    Thanks for the info. I was considering the rear disc brake conversion if nothing but for kool factor. I think I will stick with practical old school drums.
  13. Bone Shaker

    Anti theft steering column

    My brother has a corvette and he uses a battery disconnect throw switch. He just leaves the keys in it. LOL Not stolen or damaged yet and it is stored in an open carport
  14. Bone Shaker

    The Shock Thread

  15. Bone Shaker

    HELP!! (Make me a list please) as I’m

    Just a little advice. I lowered mine bell tech 4/6. My stock 15 “wheels scrub the bottom a frames bad. (Will lock up the tires when turning very much). I have heard on this forem that you can shave a little off and help some. I switched to 18” after finished body work and paint. I do trust you...
  16. Bone Shaker

    Air Conditioner: what would you do?

    Try everything before you do the evaporator core. It’s a big job(like all weekend for me). I just got my a c straightened out and I am so glad O b w if you go into the heater box evaporator box be sure to replace the heater core also. I would only trust genuine a c delco parts. I don’t ever...
  17. Bone Shaker

    Finished drop, finally

    Ok hee
  18. Bone Shaker

    Finished drop, finally

    I love the 1 piece back window. I am going to put one in mine. I hope I don’t have any paint issues around the edges
  19. Bone Shaker

    Finished drop, finally

    thesuspensionsource2010. I haven’t got it yet but, it is supposed to be on the way o b w do u no if the bed has to come off to install the top shock mounts I guess I am the only person in my area doing this kind of stuff and it’s great having you guys to talk to. Keep up the good work
  20. Bone Shaker

    Finished drop, finally

    Sorry for the loss of your mom Thanks for the info. Got the street performers on the way and also the top shock locator. Trimmed my rear fenders with body saw, rolled the front inner lips with fender roller Thanks for the compliment this is my first attempt at a custom truck. Been doing...
  21. Bone Shaker

    Fixing a Rust Hole, how dumb am I?

    I always weld solid Easy with the heat Take you time. Never thought about the bolt trick. Whatever you use grind down after Welding. Small spots get bigger when you are working on them. Good luck and you got this
  22. Bone Shaker

    Finished drop, finally

    O b w how are the bell tech shocks? I have a set of the street performers ordered (Hope you love em)
  23. Bone Shaker

    Finished drop, finally

    Looks good. Nice truck
  24. Bone Shaker

    Resonation.......

    Nice truck
  25. Bone Shaker

    The Shock Thread

    Just got all my information together to order bell tech street performance shocks and #6658 shock extenders. Review on bell tech site says bed needs to come off to install the extenders. Is this correct? Don’t know for sure if I am going in the right direction. Any advice would be appreciated...

Latest posts

Members online

Total: 887 (members: 13, guests: 874)

Forum statistics

Threads
64,242
Messages
1,389,569
Members
51,220
Latest member
DJost

Share this page

Top