Search results

  1. SpencerW

    No Power to AC Compressor

    I think I have everything wired up. I ran the low pressure switch in line with my signal switch. I purchased a Holley AC kit. But the light green wire coming from my AC control head does not have any power.
  2. SpencerW

    No Power to AC Compressor

    I have a 97 LS swapped. Removed PCM and running TermX now. Trucks been done for 1.5 years, but never drive it because it's too hot for daughter. Trying to get the AC going. I'm having issues getting power to my compressor. I have no power going out the light green signal wire. Where does pin 30...
  3. SpencerW

    Swapped TermX A/C issue

    What or where do you see that? Again, I'm terrible at understanding these.
  4. SpencerW

    Swapped TermX A/C issue

    Like i said, I'm pretty illiterate on this. I'm just making thr assumption it is 12v though. I've essentially bypassed everything now, just utilizing the factory original HVAC control on dash now for the button. Everything else works on the control besides HVAC related things. Temp, blower...
  5. SpencerW

    Swapped TermX A/C issue

    Im currently not running GM ECM. I'm running Holley Terminator. I've wired in 'Curent Performances Holley AC Kit'. With that, I tied in the low pressure switch on the accumulator in line to the Signal wire. Only issue is, my signal wire from the AC button in cab is not putting power out. I've...
  6. SpencerW

    Swapped TermX A/C issue

  7. SpencerW

    Swapped TermX A/C issue

    Hello all, I have a 97 c1500 Swapped with a Termx. I'm not getting power to my compressor, I've traced back I'm not get a 12v to my light green signal wire. I cut out the original PCM. So I'm trying to figure what wire supplied 12v to the light green signal wire. Any ideas?
  8. SpencerW

    Wiring A/C to work without PCM 98 7.4L K3500

    I started this project couple years ago, had a baby and stopped. She's now 2, loves riding in the truck, but it's too hot. I've cut some of my wires. Have a low pressure switch, high pressure, factory fuse block, and I'm struggling to get the AC to work. I had one wire cut to the high pressure...
  9. SpencerW

    Wiring A/C to work without PCM 98 7.4L K3500

  10. SpencerW

    GMT 400 Hydroboost swap

    I decided today that I'm switching my 97 obs to hydroboost. I just started LS swapping it. Lq9, big cam, gen 4 rod, holley intake, Terminator Xmax with a built 4l80. Currently painting the firewall on my OBS as I didn't do this originally. I still have my 06 denali that was my donor. Im pulling...
  11. SpencerW

    Tailight issues..

    Just finished my truck today. All tailights, brake lights, blinkers, were wroking. I got pulled over tonight for no rear lights.... Heres the verdict.. Key off, manually on, i have a rear tail light with buzzer going. I hit the brake, i lose tailight and buzzer goes off.. Turn the key on I have...
  12. SpencerW

    C1500 leaf Springs

    Are these factory c1500 leaf springs?
  13. SpencerW

    Leaf/frame/axle Question

    Oh really? Darn!
  14. SpencerW

    Leaf/frame/axle Question

    My truck had 2" Spindles with 4" drop springs and 2" shackle.. My truck does not sit on the frame? How close should 6" drop rearend/frame be? Today I installed 2" drop coil in addition to the spindle.. Doesnt appear to have lowered it a full 2" and really doesn't look like it lowered it any...
  15. SpencerW

    4/6" Notched

    Has 2" Spindles.. 4" leafs and 2" shackles..
  16. SpencerW

    4/6" Notched

    Yours looks great. How will the flip (6") work with the springs (4")? Yours is 5/7, correct? What did you use exactly, brand and all?
  17. SpencerW

    4/6" Notched

    Can anyone verify if beltechs 4" leaf has a 50 painted on top side? If so, then I currently have 6" in the rear.. I don't have a notch and im not on the frame.
  18. SpencerW

    4/6" Notched

    I would have to do the flip and set the bed back on to know, right? I was gonna keep the 2" spindles for the front. Just cut my coil, or get 2" drop coils. I have 4" drop leaf springs now and a 2" shackle.. This is whats throwing me off.. Im technically already lowered 6" in the back right? My...
  19. SpencerW

    4/6" Notched

    Your truck sits perfect!! If I have 3-4" drop springs.. I'll need to replace the springs with factory, correct?
  20. SpencerW

    4/6" Notched

    Hello all! I have aquired my fathers old truck. 1997 c1500 5.7 5-Speed. I'm looking to c-notch and lower further. Have some questions. 1) Will pinion angle need to be adjusted? 2) Drive shaft need shortened? 3) Those of you that have done this, do you regret it? 4) My truck is lowered with 2"...

Latest posts

Members online

Total: 1,754 (members: 21, guests: 1,733)

Forum statistics

Threads
64,334
Messages
1,391,489
Members
51,439
Latest member
sherberto

Share this page

Top