Search results

  1. Black98Burb1500

    Are bucket seat backs detachable?

    Thanks for the replies.
  2. Black98Burb1500

    Are bucket seat backs detachable?

    It's easier just to pull the whole seat then right I was leaning that way just thought it might be a possibility I already have the bottoms done but the uppers look a little more difficult.
  3. Black98Burb1500

    Are bucket seat backs detachable?

    I have a 1999 Suburban k1500 Lt with front buckets and I've already replaced the seat bottoms now I'm going to do the upper portion or seat back and am hoping I can just remove that instead of the whole seat like I did for the lower portion. if anyone has any advice, I would appreciate it.
  4. Black98Burb1500

    rear wheel disk conversion

    My truck has the jb5 system I completely rebuilt the system when I got it and they work really well so maybe find a later year k1500 at a junk yard and just go to town tanking the whole brake, drivetrain and suspension parts they should all bolt on basically I like drum breaks for 1 reason if...
  5. Black98Burb1500

    Leaf springs worn out?

    Do you have a part number or model info on those leaf springs the nbs 2500?
  6. Black98Burb1500

    Where's the reciever for the remote keyless entry?

    Thank you I took the time to pull it out and found a broken wire back in the column and once that was repaired everything worked again!! Appreciate the response
  7. Black98Burb1500

    Recommendations for torsion bars and leafsprings replacements

    So I'm trying to get my 99 suburban k1500 lt with the 5.7 back to its former glory and I'm starting to think my torsion bars are tired considering I've replace everything else on the ifs. I'm still having problems getting the stock ride height back and no more room to crank my torsion bars. I...
  8. Black98Burb1500

    Where's the reciever for the remote keyless entry?

    99 burb lt k1500 5.7 v ocho power. My key fobs just randomly quit working I tried the relearn procedure a bunch of times and the key fobs (2) do make the locks and horn cycle like it worked but will not do anything after pulling the jumper and closing the door. Where is the rke reciever I do...
  9. Black98Burb1500

    Trying to fix my odometer and now I have security light and no rke

  10. Black98Burb1500

    Trying to fix my odometer and now I have security light and no rke

    My year warranty on my tires and alignment
  11. Black98Burb1500

    Trying to fix my odometer and now I have security light and no rke

    Yes it drives totally normal
  12. Black98Burb1500

    Trying to fix my odometer and now I have security light and no rke

    I have a 1999 suburban k1500 lt and I had a broken odometer. Which I was fine with since depreciation was at a stand still. It was going to void some warranties i wasn't prepared to lose. So I switch the cluster out with my 99 denali parts trucks cluster. I automatically got a solid security...
  13. Black98Burb1500

    Im just about fed up!!

    Thats been a lot of help thank you. I had some family stuff come up this morning so didn't get to the shop but I did switch the tires and checked the rear brakes and i do need the cylinders for the drums there leaking slightly so im gonna switch those out and see if it helps while I wait to go...
  14. Black98Burb1500

    Im just about fed up!!

    It goe away for the most part when i hit the brakes or atleast decreases atleast 50%.
  15. Black98Burb1500

    Im just about fed up!!

    It drove straight before. Your right i bought it a year ago for $1500 and put well over that in parts alone and days and days of time I've already replaced the motor too. The ride was overly rough I know every person that doesn't know what these trucks feel like say that but I drove another 99...
  16. Black98Burb1500

    Im just about fed up!!

    Its just getting old having to sit there and wait for them to work on it this will be the 4th time atleast its free but still my time isn't im going back in the morning ill put the new print out on here as well as the temps for each wheel.
  17. Black98Burb1500

    Im just about fed up!!

    This was after 2 failed attempts by the first shop they were closest to my house after the rebuild they had my upper control arm bolts torqued under 70 ft lbs I won't let them even look at my truck again unless im flying by there shop
  18. Black98Burb1500

    Im just about fed up!!

    I have 3 of them ill post the latest one that wasn't from a hole in the wall like the first 2
  19. Black98Burb1500

    Im just about fed up!!

    I had no idea the techs must have transferred from auto zone then. I figured they would be half way knowledgeable about there trade but not suprised at all.. I will definitely look into the 4x4 club we do have a couple 4x4 shops in town I used to take my ram charger there when I didn't own a...
  20. Black98Burb1500

    Im just about fed up!!

    It pulls until I hit the brakes when there applied all is well
  21. Black98Burb1500

    Im just about fed up!!

    The tires have been rotated and balanced i dont know where they were moved from though I will try swapping front tires, it did not happen this severe but it did pull some before and the brake drag is worst on deceleration and somewhat on acceleration when the brakes are applied the pull isn't as...
  22. Black98Burb1500

    Im just about fed up!!

    Ok so I drive a 1999 suburban k1500 lt with the 5.7 vortec. 5 months ago I got a wicked rod knock so I bought a 99 denali and swapped motors. Truck was running good for a few months and I wanted a smoother ride so I got new upper and lower control arms, tie rods, cv joints, hub and bearings...
  23. Black98Burb1500

    k1500 axle nut socket size?

    sorry didn't realize this is a ancient thread my bad
  24. Black98Burb1500

    k1500 axle nut socket size?

    My 99 suburban k1500 is not a 36mm and I'm having trouble finding out what it actually is. I bought a 36mm and its too big.

Latest posts

Members online

Total: 773 (members: 15, guests: 758)

Forum statistics

Threads
64,242
Messages
1,389,564
Members
51,219
Latest member
1989Bowtie

Share this page

Top