Search results

  1. theoutlaw

    A/C Compressor Oil

    Well figured I'd update this to help people. The instructions that came with the compressor said to pour half the oil for the system into the compressor and the rest into the accumulator. So that is what I did. I also purchased a A/C flush that comes in an aerosol can and sprayed it into my...
  2. theoutlaw

    A/C Compressor Oil

    I don't know if the shops around here open Monday. Tuesday I have to drive it all the way to Idaho. Can't delay the trip because I have to be there for court to get custody of my daughter. I wanted the A/C working so she doesn't cook on the way back.
  3. theoutlaw

    A/C Compressor Oil

    Unfortunately I've had it apart for 2 years and paying a shop isn't an option.
  4. theoutlaw

    A/C Compressor Oil

    So about 2 years ago I had to remove my compressor and put a bypass pulley on. I now want to put a new compressor on so I can get my A/C working. I know that I will need a new compressor, accumulator, and hose assembly. Also gonna replace the orfice filter. I know I need to get A/c manifold set...
  5. theoutlaw

    obs z71 tahoe

    X2. My Blazer has the Z71 package but no stickers.
  6. theoutlaw

    My 1992 Blazer

    Nice Blazer. It seems loaded. I noticed the Silverado package. Is that a Z71 as well?
  7. theoutlaw

    My 94 Blazer

    That's because mine is from Washington state and has never seen a Mass winter yet. Aamco has it apart now. I'm also having the install a heavy duty torque converter and an external tranny cooler. Then when I get her back I'm gonna get a more heavy duty radiator for the engine that doesn't have...
  8. theoutlaw

    My 94 Blazer

    Cylinder head.
  9. theoutlaw

    My 94 Blazer

    Finally got the running boards off. Also gonna send it to Ammco tomorrow to have the trans rebuilt. I also picked up some 2" lift blocks for the rear that I'm gonna put on. Here's some pics of her without the runnin boards.
  10. theoutlaw

    Well I'm an idiot

    Check your firing order.
  11. theoutlaw

    3rd row seat swap in a 94 Blazer. Anybody done it.

    I need more seating and can't afford and don't want to replace my Blazer so I was wondering if anybody ever installed a 3rd row seat in one.
  12. theoutlaw

    Recomended Stock Wheel Tire Size?

    Well its the same thing as my 94 Blazer and mine has LT265/75R16s Stock. But I have the Z71 and the trailer package.
  13. theoutlaw

    Toyo Open Country MT or Nitto Trail Graps ?

    Neither. I've had nothing but bad luck with several different Toyo tires. I say BF Goodrich or Goodyear. Maybe Cooper. I had a Toyo Open Country blow out on me going over the mountain pass in Oregon. Tire pressure was good because I just checked it not even 3 miles before it happened while I...
  14. theoutlaw

    How do I positively and easily Identify my engine size and vehicle trim?

    As far as going by numbers I'd say check the block or the 8th digit of the vin on your dash. The fan shroud could've been swapped by the previous as well as the glove box. The engine casting number and your VIN are the only 2 I'd trust. You can also double check the VIN on you stickers to make...
  15. theoutlaw

    Fan Clutch and gear ratio???

    They also like to ask which radiator you have.
  16. theoutlaw

    My 94 Blazer

    Ok. More progress. I replaced all the hoses, the thermostat (180*), temp gauge sender, and the fitting in the intake manifold. Thank god for PB Blaster and the miracle of that stupid fitting not breaking. LOL I did notice 2 things. One my temp gauge is bad. The new sending unit didn't fix it. It...
  17. theoutlaw

    Fan Clutch and gear ratio???

    They were trying to determine if you have a heavy duty cooling system or not. They asked me that question when I was shopping for a radiator and hoses.
  18. theoutlaw

    My 94 Blazer

    Got the rear mat installed today. I'll post pics tomorrow. I left the spare tire mount out because I plan on getting a rear tire carrier or roof rack to mount the spare to and didn't want to have the bolt holes cut in the new mat. I'm just gonna lay the tire in there for now. I did put the bolts...
  19. theoutlaw

    3 gauge pillar hell!!!!

    I'd go with Glowshift. Thats what I'm gonna use. I've never heard anything but good things about them and my little brother has 2 of their pillars for Eclipses and they fit great. Plus I saw alot of the Cavalier guys use them with no complaints when I was in that seen.
  20. theoutlaw

    Temp Gauge has me Hot!!

    X2. It also comes in handy for finding out which cylinder is misfiring. You could also get one of those radiator caps that has a temp gauge built into it.
  21. theoutlaw

    parting out 88 k1500

    Pics of the running boards.
  22. theoutlaw

    What size speakers??

    I'd get some boxes and throw some 6x9s behind the seat. It'll sound alot better than throwing another pair of 4x6s back there.
  23. theoutlaw

    Extra battery tray

    I got my second tray from LMC. You still have to drill the holes for it though. I havn't installed mine yet but I believe it sits over the vapor canister.
  24. theoutlaw

    My 94 Blazer

    I actually like the aluminum wheels that are already on it. when I do replace the shocks I was going with something adjustable. Not sure on the brand yet though. As for the engine I'm planning on vortec heads with the GMPP intake manifold and a cam. Havn't decided on the cam yet. Of course I'll...
  25. theoutlaw

    My 94 Blazer

    The boards are taking a hike tomorrow. I dumped the ***** so I don't need anything for her step on. anymore. Priorities. LOL I actually like the bug gaurd and badges. I am ditching the chrome fender molding but keeping the rest because of 17 yaer paint fade difference. As for the roof rack it...

Latest posts

Members online

Total: 1,518 (members: 43, guests: 1,475)

Forum statistics

Threads
64,252
Messages
1,389,881
Members
51,244
Latest member
Red93k1500

Share this page

Top