Search results

  1. 98 K1500 L31

    Truck cranks but doesnt start

    I had a very similar issue, it would crank and crank but wouldn't run, but the next day it might start. It ended up being the ignition control module on mine. I bought a cheap one first, but it was worse than before. So i finally just bought a performance distributor icm and haven't had a issue...
  2. 98 K1500 L31

    4l60e no 1st or 4th

    I ordered a new harness, corvette servo, and billet accumulator pistons since it would be apart anyway. Should be here tomorrow. Hopefully that fixes it.
  3. 98 K1500 L31

    Too Much Steering Assist

    You would remove the old line and put a 96 line on it and screw that line into the adapter. the 96 line already has the right bend so there is no need for that leaky GM adapter. It is a Gates 353950. But I also agree that your steering box might have problems also.
  4. 98 K1500 L31

    Too Much Steering Assist

    https://www.speedwaymotors.com/Power-Steering-Adapter-and-Flow-Valve-Kit,379646.html It has to be this valve. I ordered a jegs first, but it had the inverted flare so it woudnt screw into the pressure hose
  5. 98 K1500 L31

    Need advice on led headlight conversion???

    Here is the link for 4Hi mod https://www.gmt400.com/threads/4-hi-headlight-mod.122/
  6. 98 K1500 L31

    Need advice on led headlight conversion???

    As far as fitment they were fine. It doesn't matter what brand you get they will still have to be adjusted. I park on a level area in front of a garage door and adjust until they are the same height and look about even on both sides. Than I drive around and adjust until the road is lit up best...
  7. 98 K1500 L31

    Need advice on led headlight conversion???

    You will also need orange reflector bulbs if you put clear ones on to be legal. I won't go into to much detail as there are already some really good articles on this site. The 4hi leaves your dims on when you turn your brights on. It just consists of a relay and some wires. I like my headlight...
  8. 98 K1500 L31

    Need advice on led headlight conversion???

  9. 98 K1500 L31

    Need advice on led headlight conversion???

    I put Hikari 9005 and 9006 LEDs in mine and I love them. Also did 4Hi mod. If you go with cheapo housings I suggest trying to reuse the original mounting brackets. Mine only lasted a few months before they broke. I got mine from headlights depot
  10. 98 K1500 L31

    Too Much Steering Assist

    I just recently deleted my EVO due to really twitchy steering a couple of months ago. First I just unplugged the sensor under the wheel, but it was super light steering. Also since it is now full boost my pressure line only lasted a couple of months before it blew. I didnt like the design of the...
  11. 98 K1500 L31

    4l60e no 1st or 4th

    That's what my dad said too, but I still have reverse and no chunks or anything in the pan. Thanks for all the input
  12. 98 K1500 L31

    4l60e no 1st or 4th

    I ended up pulling the pan again and testing the harness. I ohmed them to ground and got 3 out of 4 wires to read resistance so I am going to say my inner trans harness is bad. The old shift solenoids tested fine
  13. 98 K1500 L31

    4l60e no 1st or 4th

    I still have all dash functions, 2nd and 3rd gear. I didn't know that pulling the fuse puts it into third. Even when I manually shift it into first it still won't go. But I can connect my scanner to it and put it in first it reads that I am in first even though I'm in second.
  14. 98 K1500 L31

    4l60e no 1st or 4th

  15. 98 K1500 L31

    4l60e no 1st or 4th

    No, my meter decided to take a dump so I decided to just put them in. I will probably take it apart again and use a friend's fluke meter on Monday, might ohm the old solenoids also.
  16. 98 K1500 L31

    4l60e no 1st or 4th

    I have a 98 k1500 with a 4l60e and 164,000 on it. It has always shifted great, never had any problems. I went to the store and left it running, when I got back my CEL was on. When I left no 1st or 4th gear. After doing some reading I decided to replace both shift solenoids and filter. Installed...

Latest posts

Members online

... and 16 more.
Total: 1,647 (members: 66, guests: 1,581)

Forum statistics

Threads
64,241
Messages
1,389,485
Members
51,206
Latest member
truckmonkey

Share this page

Top