Search results

  1. 9

    305 tbi to 97 350 cpi

    Eh just surface rust. Question though do I need the tbi pushrods or the CPI pushrods for the valves?
  2. 9

    305 tbi to 97 350 cpi

    Same exact cab and length. Extended cab 6 ft bed
  3. 9

    305 tbi to 97 350 cpi

    I wanna use the 97 heads and the 97 CPI intake and the 97 harness and ecu
  4. 9

    305 running rough

    No I measured between the disconnect battery terminals on the battery not the cables
  5. 9

    305 running rough

    Is that normal?
  6. 9

    305 running rough

    I ment between the negitive cable and negitive terminal. I hate this phone It automatically spells words
  7. 9

    305 running rough

    Also idk if its normal but I disconnect the battery completly and measured the amp draw between the hot and negitive terminals and it had 1.24 with a completely disconnected battery
  8. 9

    305 running rough

    Just checked AC voltage as described as soon as I touched the dBm to the alt. Output and to gtound it showed 2.6 but instantly dropped to 0.04 than 0.00
  9. 9

    305 running rough

    I dod the parasitic draw by disconnect the negitive cable and use my dvm sat to 10 amps and measured the amp draw between the negitive terminal alternator and cable. And removed each fuse 1 at a time I checked every fuse and always had 1.24 amps across the battery to negitive cable. I checked...
  10. 9

    305 tbi to 97 350 cpi

    Could I just bolt the 97 heads and intake on my 95 block?
  11. 9

    1998 Tahoe using 1999 Harness (rebuild)

    Why not just use the oil pressure thays for the harness ya wanna use?
  12. 9

    305 tbi to 97 350 cpi

    I'm good at electrical work if I'm able to get the pin outs. Witch luckily google had so I may just splice the dash harness
  13. 9

    305 tbi to 97 350 cpi

    So im fiximg to fix all my problem with this tbi. My brother sold me his 97 1500 with the 350 CPI 4l60e. I wanna swap it in my 95. The engine and trans has 36k since we overhauled both. The 97 just wrecked. What all do I need to swap from the 97 to the 95
  14. 9

    Battery keeps being drained

    How do I check the amp draw on each fuse?
  15. 9

    Battery keeps being drained

    I have a 95 k1500 5.0 4l60e. Recently overnight battery keeps being drained so I had both battery brand new and alternator test good. I did a parasitic draw test with my dvm at 10 amps and disconnected the negitive cable and checked amp draw between terminal and cable by removing one fuse at the...
  16. 9

    Rear disc brake conversion keeping 15” wheels

    i wanna do this as i hate drim brakes worse than i hate my ex wife lol a cad file would be awesome with the specs or the actuall brackets for a 95 k1500 16" rims 4wd
  17. 9

    OBS to NBS Master Cylinder Upgrade REPORT

    Giggity
  18. 9

    brake line question

    how would i bypass the 95 kelsy hays abs? trust me i really want to do that. it dont even work
  19. 9

    OBS to NBS Master Cylinder Upgrade REPORT

    will this work on a 95 k1500?
  20. 9

    brake line question

    so i just relized we have a brake section now i feel like a idiot lol. so i need to replace the master cylinder, i have new one however upon removing the old master cylinder, the fitting on the rear chamber is rusted to the hard line. is there a way to loosen the fitting from the hard line...
  21. 9

    Brake question

    Well I had to post it somewhere cause we have no brake section just interior, transmission, exterior and engine. No general section
  22. 9

    99 Suburban MegaFuse block wiring

    Either or will be fine. If you have the long wire that goes to the main fuse box, if the fuse blows it will turn truck off where if it's on battery side it will run till battery dies
  23. 9

    Oil filter part number

    So I bought a oil filter for my 95 k1500 and it's thinner than the one I took off. Old one is about 3 to 4 inches in diameter and new one is like 2 inches in diameter. Don't have exact measurements but there noticibly different. When I went to put the new one on it didn't even touch the gasket...
  24. 9

    1992 5.7l engine diagram.

    I have a 95 5.0 but should be the same as yours. I'll take a pic tomorrow
  25. 9

    Brake question

    So I completely bleed the brakes until no air was coming from the bleeders and hose fittings but when I press the pedal its like air bubbles is coming out of the rear large chamber of the master cylinder. Is this normal? It's a 95 k1500 5.0 and has the Kelsy Hayes abs

Latest posts

Staff online

Members online

... and 7 more.
Total: 1,573 (members: 57, guests: 1,516)

Forum statistics

Threads
64,248
Messages
1,389,813
Members
51,236
Latest member
Old97silver

Share this page

Top