Search results

  1. Dennis Wilkie

    350 to 454

    I've already got 3" true dual exhaust with Magnaflow mufflers, but I came across these last night and according to Summit, they say they'll fit a 92 K2500 or 3500. So i'm gonna order em and hope for the best. https://www.summitracing.com/parts/hed-69390
  2. Dennis Wilkie

    350 to 454

    Does anyone know of any headers that will fit a 1992 k1500 after I swap out the 350 for a Gen VI 454? Preferably long tubes, but after searching for 2 straight weeks, I don't think that's even an option anymore. I really don't want block huggers or shorty's, but at this point, i'm willing to...
  3. Dennis Wilkie

    Short circuit

    My tach and courtesy lights flicker all of the time. I just went through everything again a little while ago, and I can't find anything out of place. I soldered and used heat shrink on all of my connections. There's a brown and a grey wire that comes directly off of the convenience center that...
  4. Dennis Wilkie

    Short circuit

    I've got a 1992 K1500 with an electrical problem. My courtesy lights and aftermarket tach are flickering, so i've been going through the wiring. I noticed that my ground on the courtesy light was showing .3v with nothing on and the doors closed, but when I opened the door, it showed 12v. I've...
  5. Dennis Wilkie

    Oil coming from intake manifold bolts

    So Pro Comp's are cheap now? I own and very frequently use all 17 of my guns little man, and am licensed to carry across any state line. Don't get fucked up
  6. Dennis Wilkie

    Oil coming from intake manifold bolts

    Members of my family tell the FBI what to do. I'm not even slightly worried
  7. Dennis Wilkie

    Oil coming from intake manifold bolts

    You'd know if I was mad...probably not for long, but you'd definitely know. And where the **** is "Bryan"? There's nowhere even remotely close to me by that name. I can start that truck up and go when and wherever I want. As a matter of fact, I put close to 100 miles on it today just burning gas...
  8. Dennis Wilkie

    Oil coming from intake manifold bolts

    Where do you live? I'd like to come visit you and shake your hand
  9. Dennis Wilkie

    Oil coming from intake manifold bolts

    Well, the FBI has said I can own and carry all that I want to, and they can try to come take em from me if they want.... but they better pack a lunch, cuz it's gonna be a long day
  10. Dennis Wilkie

    Oil coming from intake manifold bolts

    A Democrat would have an aneurism if they saw this many guns in 1 household. I'm a member of the "mind your business, and i'll mind mine" party.
  11. Dennis Wilkie

    Oil coming from intake manifold bolts

    Yeah, it looks like they drilled another adjoining hole into it for some unknown reason. I'm guessing it's because the bolts have to go into the head at a slight angle instead of straight down.
  12. Dennis Wilkie

    Oil coming from intake manifold bolts

    Yeah, it was machined with 2 holes on the driver's side. I have a PCV valve and a hose going into the back of the throttle body riser. But the vacuum from the front of the throttle body is going to the passenger PCV. This is an older picture, but the setup is still pretty much the same aside...
  13. Dennis Wilkie

    Oil coming from intake manifold bolts

    That aluminized blue looks good. Is that custom or did u find it from a retailer? I thought about getting some rocker arms i've been seeing around like that
  14. Dennis Wilkie

    Oil coming from intake manifold bolts

    Right! If any of it would've pertained to the the topic, I would've just rolled with it. But since they wanted to personally attack me, I felt obligated to push back. It is what it is, and it's all over with as far as i'm concerned.
  15. Dennis Wilkie

    Oil coming from intake manifold bolts

    Nope. They shouldn't have provoked me. I do appreciate you asking nicely though.
  16. Dennis Wilkie

    Oil coming from intake manifold bolts

    The equivalent of shutting someone up who has contributed literally nothing to this entire thread. But then wants to jump in like a drama queen with his worthless two cents. Take that weak ass Jerry Springer hoe **** somewhere else old man. As for your dickriding cheerleading ***** ass, I...
  17. Dennis Wilkie

    Oil coming from intake manifold bolts

    Dismissed
  18. Dennis Wilkie

    #8 cylinder noise

    Yeah, it's easy enough, but having to take that intake off for the 3rd time in 2 months is starting to get expensive. All of these gaskets are really starting to add up, especially since I refuse to buy the cheap ones.
  19. Dennis Wilkie

    Oil coming from intake manifold bolts

    Well, if he had read the comments, then he would have known that it had already been addressed and that i'm not able to control what was done before I got the truck, sir. BTW, NOTHING electrical is going to have any effect on the issue at hand. So yeah, it was dismissed, just as your irrelevant...
  20. Dennis Wilkie

    #8 cylinder noise

    The pressure has been getting progressively worse. But i've got an aftermarket gauge and the top of the motor has around 10k miles on it. I swapped the oil pump and it doubled the pressure to around 40-45 psi cold when it was only getting up to around 20 at best. The motor itself came out of an...
  21. Dennis Wilkie

    Oil coming from intake manifold bolts

    Way to not catch up on the discussion and start chiming in with minimal information.....class act. It's an Edelbrock Performer 3704 TBI, and it's never leaked once from any of those bolts in the whole past year i've owned it until now. They're slotted because there are angled spacers that are...
  22. Dennis Wilkie

    #8 cylinder noise

    I've been trying to figure out what this tapping noise is for awhile now. I finally pulled the plug wire off of the distributor, and it was the very 1st plug I pulled that made it stop. So, #8 was tapping, so I readjusted the valve, and it got quiet...for a couple of minutes. It just came back...
  23. Dennis Wilkie

    Broken valve cover bolt

    After adjusting my #8 cylinder rocker arms to muffle a tapping sound, I managed to snap 1 of my valve cover bolts. It was apparently ready to go, because it didn't take much pressure at all for it to break. Do they make extractors this small? Or does anyone have any suggestions on what to do...
  24. Dennis Wilkie

    Oil coming from intake manifold bolts

    Man, I honestly don't even remember. I did all of that at the beginning of the summer, but this thread might be able to help you. https://chevytalk.org/fusionbb/showtopic.php?tid/116955/
  25. Dennis Wilkie

    Oil coming from intake manifold bolts

    Yeah, I'm not a big fan of em, even for stereo use. But I've got to figure out alot of other things before I can get into the wiring any more than I already have...and I've done almost of that already

Latest posts

Members online

... and 16 more.
Total: 1,495 (members: 66, guests: 1,429)

Forum statistics

Threads
64,318
Messages
1,391,275
Members
51,415
Latest member
47venture

Share this page

Top