Search results

  1. Koast

    98 suburban 2500 needs fuel pump were to buy

    Thanks for the responses gives me some good ideas.
  2. Koast

    98 suburban 2500 needs fuel pump were to buy

    Where's the best place to buy a fuel pump for my 98 suburban 2500. Left me stranded at the gas station after putting in a half of a tank. Any help would be appreciated!
  3. Koast

    98 suburban question

    I have a 98 suburban 2500 4 x 4. There is a gentleman online selling 410 gears from a 2003 Chevy 2500hd. Is it correct that the front ring is 9.25 and the rear is 10.5 on my suburban? I do know my rear axle is a full floater but I just want to make sure I got the numbers correct.
  4. Koast

    Signs of a bad or going bad fuel sending unit or pump

    First of all let me say I understand this job is not fun but that's okay it's not my only vehicle. I have a 98 suburban 2500 and what are the signs that the fuel pump is going bad? At this time the issues that have me concerned is a very twitchy fuel gauge. Another sign is that I will drive it...
  5. Koast

    454. Vortec max miles you would go?

    In February I bought a 98 suburban 2500 from an older gentleman who was the original owner kept it in his garage never park it outside. The interior looks almost new. It has 200k with 454/4l80e and 14 bolt full floater rear axle. Doesn't leak any fluids and one of the biggest selling points for...
  6. Koast

    Slight misfire question

    At idle only I get a slight misfire only when it warms up. I have a 98 suburban 2500 with 7.4. I've changed fuel filter, plugs,wires and distributor and replaced with non ethanol fuel. Is there any one here that had had this issue? Everything else is fine, no engine lights, no hesitation on...
  7. Koast

    Slight misfire question

    I have a 98 vortec 7.4. I changed the plugs,wires,cap and rotor. It's much better but still a slight misfire. Is it the ignition coil or am I way off? Any help would be appreciated.
  8. Koast

    Torque specs question

    Future references US wheel adapters good...... Wheel adapter USA bad.......
  9. Koast

    Torque specs question

    Did some more searching and a reputable company said 140 ft lbs and the company that said 95 ft lbs are basically wanted by the BBB. There's my answer...
  10. Koast

    Torque specs question

    I have a 98 Suburban 2500 14 bolt ff rear axle.
  11. Koast

    Torque specs question

    I have a 14 bolt full floater on the rear of my suburban and was looking to get some 2in spacers. the guy at us wheel adapter told me with their aluminum 2 inch wheel spacers it needs to be torqued at 95 foot pounds. For 3/4 ton that seems awful light to me does anybody have any suggestions?
  12. Koast

    Posi rear end question

    Thanx for the responses. I've never heard of the torsen diffs. Do they sell those for 14 bolt ff 10.5?
  13. Koast

    Posi rear end question

    Hello this is my first post I'm new to the forum. I have a 14 bolt full floater rear axle that has an open diff and I'm looking just throw in a limited slip device I'm down to either the Eaton truetrac or the Yukon. Does anybody have any experience with either of these that could give me some...
Top