Search results

  1. thatclappedsilverado

    Tbi 305 stalling/hard start

    Got an interesting problem and im not exactly sure what to look for. I have a 95 k1500 5.0/5spd from the factory. And I cut up the harness when I was 16 to carb swap the truck. Just put another tbi 305 with a wiring harness in the truck and been having an issue where the thing refuses to idle...
  2. thatclappedsilverado

    95 k1500 5.3 swap fuel lines

    5.3 with return rail, looking for the easiest way to hook up the fuel lines, really dont want an lines want it to look fairly oem, Saw somewhere that you can use the factory tbi lines with adapters on the ends to hook up at the rail. Any input would be great besides waiting on my mounts and...
  3. thatclappedsilverado

    355 Looses power around 5000rpm

    95 k1500 with a 355 10.25:1 with speedmaster 195 alu. heads, and a comp xe274 with 1.6 rockers .519/.522. Issue im having is i had an edelbrock carb on it and had nothing but issues and it finnaly crapped out on me the other week. Put a holley 650 mechanical secondary on it and it now idles and...
  4. thatclappedsilverado

    95 carb swap wiring

    See a lot of parts and already know how to carb swap but I cut some of the harness out for the stuff that was never going to get used but wanted to know what I can cut and keep at the firewall plug. Currently only 3 things I have ran is oil pressure, coolant temp in the head. And alt and dist...
  5. thatclappedsilverado

    Jegs bandit efi kit

    Has anyone used it? Picked it up for 870$ and seems to be a pretty complete kit minus fittings. Going on a mild 350 in a 95.
  6. thatclappedsilverado

    Opinions on the NV3500 (just curious)

    Everyone seems to hate on the 3500, im just looking to see what peoples honest opinions are on them. Ive had one in my truck since 95. I know its never been changed out since the truck still had the original clutch in it from 95. (people that owned it before my family were older and babied it)...
  7. thatclappedsilverado

    Carbed 350 breaks up then clears out at wide open throttle

    So thanks to the help of yall, i got the cold start issue figured out. However, now that it starts im having an issue where partial throttle is fine driving it around but if i hammer on it from any rpm other than wide open and dumping the clutch it breaks up then clears out. Edelbrock 1406 carb...
  8. thatclappedsilverado

    EFI or Carb

    So about 8 months ago i had put a 'built' 350 in my truck. I went the carb route at the time because i kept getting told no one could burn a chip for my truck but im to the point to where i would like to take this motor out and put another one in. We cut out alot of the harness in the engine bay...
  9. thatclappedsilverado

    95 K1500 Clutch wont disengage

    so i recently put a carbed 350 and a new clutch with it in my truck and i know i put the clutch and throw out bearing in correctly cause i followed the haynes manual. The problem im having is my slave cyl was not un hooked when we took the old engine and trans out(it was unbolted) so no fluid...
  10. thatclappedsilverado

    Thread size of shift lever

    Hey all, looking to find the thread size of the shift lever, trying to find a longer shifter arm for my truck and havent had luck yet. Its a 95 k1500 nv3500 and im not in a super great position to work on it right now. No garage and its been -4 almost every day for the last few days.
  11. thatclappedsilverado

    Need help getting roll pin out

    Cant get the roll pin out of the clutch slave cyl not really in a good spot to hammer on it since the line is metal and i dont want it to bend or break
  12. thatclappedsilverado

    350 Tbi setup need help with part combos

    So ive got a tbi 350 jasper engine with 78k miles on it. tore down to a short block, looking for some help putting a proper part list together. Im thinking a comp cams thumper cam. 479/465 lift CL12-600-4 vortec heads, port and polished, summit racing stage 1 intake and a holley 650cfm im...
  13. thatclappedsilverado

    2 inch lift blocks from advanced auto

    has anyone ever used the advanced auto lift blocks that you can buy in theyre store on these trucks? theyre realtively cheap and i dont have the money to do a full 6inch yet, so i was lookign at something to just raise it up a little for the time being. I like offroading but keep having issues...
  14. thatclappedsilverado

    Truck clunks when letting clutch out

    Got my truck back a few weeks ago after getting a new 10 bolt put in it. For some reason it's got a really weird issue with the clutch or trans or something like that. It's a 95 k1500 305 5spd, when letting the clutch out it clunks and then loses power. Still revs out completely but isnt as...
  15. thatclappedsilverado

    o2 sensor with duals

    was planning on doing true duals but its looking like im either gonna get rid of my o2 sensor or have to get an xpipe to get the corect readings any one have an idea on what to do? id like to have true duals but id be fine with an xpipe if need be. its a 95 k1500 305 tbi only has the o2...
  16. thatclappedsilverado

    95 K1500 "ole blue"

    This truck has been all over the north east. Starting out its life up in Michigan and going to Maryland to Ohio then to me in Pennsylvania. I bought it off of my grandfather for $1000 as a stock 305 5spd 4wd truck with 156000 miles on it. Heres how she sat the day i bought her. She was in...
  17. thatclappedsilverado

    Trans whines bad

    got another one, i know it needs replaced which is what the plan is but i wanna know if anyone knows whats up with my trans, almost a year ago i tore the transfer case up so i bought a reman no problem with it and put it in. i had to drive it across my town to get it to our garage in 4wd with no...
  18. thatclappedsilverado

    Need help with transmission selection

    I've got a 95 k1500 with a 305 and an nv3500 I want to know what years I can use to get a different trans for it also how hard would it be to just put a nv4500 in it? Mine needs rebuilt and the closest shop wants over a grand to do it. What ones can I use? Preferring to stick with the 3500 but...
  19. thatclappedsilverado

    Lock pushed into door key goes in but wont un lock

    Went to unlock my drivers side door the other day and when i pushed my key in the lock recessed about a half inch and now i cant get it to turn and unlock my door any help would be a precciated
  20. thatclappedsilverado

    Trans/Driveshaft clunks and falls on its face

    So ive got a 95 silverado. its a manual 305 4wd. and when im shifting, right when i press the clutch in the truck rocks forewards. i dont know how to really describe it but my local mechanics and my brother (diesel mechanic) said that its most likely the u joints but they seem fine and well...
  21. thatclappedsilverado

    6.5td in a 1500?

    So im new to the forum and cant really seem to find anything on this subject but i need some help. I want to know if you can drop a 6.5td in a 1500 and what the difference between the 1500 6 lug 4x4 and the 2500 6 lug 4x4. my friend said that the whole chassis is different but from what i can...
Top