Search results

  1. 96cheyene

    Nv3500 to nv4500 swap

    I think as long as you get the clutch for that specific transmission you should be good, if you're replacing the clutch you might as well spend the extra money and replace the rear main seal, throw out bearing and slave cylinder if you have an internal slave. I made the mistake of only doing the...
  2. 96cheyene

    Nv3500 to nv4500 swap

    I've seen a couple heavy halfs running around town with six lug wheels and a heavy duty driveline and suspension
  3. 96cheyene

    Nv3500 to nv4500 swap

    I've got a new master cylinder and hydraulic line that's not even a year old but would definitely go ahead and replace the other things to avoid the trouble of taking it all apart again. Would I need to modify anything else other than the cross member?
  4. 96cheyene

    Nv3500 to nv4500 swap

    K1500 is a 96 and the k2500 is a 2000
  5. 96cheyene

    Nv3500 to nv4500 swap

    I was thinking about swapping my nv3500 out of my k1500 with an nv4500 out of a k2500. Has anybody done this kind of swap and what issues did yall run into doing the swap as far as fitment.
  6. 96cheyene

    Shaking or vibration at highway speed

    The truck idles fine and pretty smooth, the only time it shakes or jerks is when im driving and acceleratin . Doesnt do it when I let off the gas
  7. 96cheyene

    Shaking or vibration at highway speed

    It will do it slightly while gaining speed going through the gears but once I get into 5th gear at 60 is when it does it the most. The shifter shakes as well and I had the tires recently put on 285/75/16. I've got the engine codes p Come up relating to a random misfire crank and cam sensor and...
  8. 96cheyene

    Shaking or vibration at highway speed

    I got a 96 k1500 350 5 speed, when I'm cruising and coming up to about 60mph shifting into 5th gear the truck starts to vibrate or shake. Once I get to about 65mph or 70mph it goes away and is smooth. Im not sure if its the engine, transmission, tires, or rear end. It doesnt shake the steering...
  9. 96cheyene

    Flashing engine light at highway speed

    That's kinda what I'm thinking. I haven't checked the cap and rotor yet, I even went with the more expensive brand for both
  10. 96cheyene

    Flashing engine light at highway speed

    Only when the fuel pump was going out, before that I just had a few codes pop up that were an easy fix
  11. 96cheyene

    Flashing engine light at highway speed

    I'll get a guy with a scanner to hook up to it and see what it shows, I've got the one from oriellys for $60. You get what you pay for
  12. 96cheyene

    Flashing engine light at highway speed

    The light flashes till I slow down to a lower speed then it stays solid
  13. 96cheyene

    Flashing engine light at highway speed

    I have a 96 Cheyenne with a vortec 350 and have recently done plugs, wires cap and rotor, fuel pump and filter within the last 5,000 miles. When I'm driving around town truck runs fine till I get up to 70mph then it starts misfiring and engine light flashes till I slow down. The code stored is...

Latest posts

Members online

... and 14 more.
Total: 1,343 (members: 64, guests: 1,279)

Forum statistics

Threads
64,304
Messages
1,390,943
Members
51,370
Latest member
Rickslick82

Share this page

Top