Search results

  1. 96z71sas

    Running lights

    Has anybody installed the Anzio 111299 headlights they have the running lights on them they are cool but I want them to turn off with the turn signals like they should any ideas how to wire them up
  2. 96z71sas

    Horn button airbag will not come off

    I have 96 k2500 with air bag I wanna clean the horn contacts but I can’t get this dang button out I know u gotta pry up on the studs but it’s stuck in cranking on them no luck what’s the deal any help would be great
  3. 96z71sas

    Fender 96 Silverado

    I’m looking for a driver side fender black only for 96 k2500 any 88-98 truck blazer Tahoe or suburban will work I’m in Pittsburgh pa will drive to meet you I can’t find one anywhere and it will be 260 to paint it and I don’t want aftermarket any help would be greatly appreciated thank you
  4. 96z71sas

    5.7 vortec fuel pressure

    I know I don’t understand I bought it new from eBay I thought it was bad so I went to auto zone used theirs it’s not the gauge it doesn’t miss fire or bog or hesitate
  5. 96z71sas

    5.7 vortec fuel pressure

    Ok so I know there supposed to be at 55-60 or something mine reads 45 psi and drops to 40 psi key on engine off but it starts and drives no problem now I replaced the spider injector today so it’s not the regulator how is this possible if there not supposed to start under 50 psi I think it’s the...
  6. 96z71sas

    Tourque spec 96-00 upper intake 5.7 vortec

    Ya I pulled it today what do you know about the fuel pressure key on ignition off I’m at 45 psi and it drops to 40 psi it’s gotta be the fuel pump but it starts and runs fine
  7. 96z71sas

    Tourque spec 96-00 upper intake 5.7 vortec

    Did did you ever pull an upper intake on one of these doesn’t seem to bad I guess
  8. 96z71sas

    96-98 vortec 5.7 fuel pressure

    Stumbles little when starting very hard in cold weather must cycle key fuel pressure is 55 key on drops to 50 after minute or so 47 psi at idle bad pump or regulator also when u Turk key off after running it goes back up to 55 then drops slowly to 50 looks little wet under regulator but don’t...
  9. 96z71sas

    Fuel pressure test 5.7 vortec

    Thanks very help
  10. 96z71sas

    Fuel pressure test 5.7 vortec

    Does anybody remember how to run fuel pressure test I can’t find a thread I think it’s 55psi key on and should hold steady and 60 while running any help would be great thanks
  11. 96z71sas

    Tourque spec 96-00 upper intake 5.7 vortec

    Nice thank you I was afraid to try this with out specs I’m going to do mpfi upgrade I’ve read all good things about it thank you
  12. 96z71sas

    Tourque spec 96-00 upper intake 5.7 vortec

    Does anybody know ware I can find the torque spec and pattern for the upper intake on a 5.7 vortec I have to replace fuel pressure regulator and can’t find this in Hayens thank you for any help
  13. 96z71sas

    The Stupid Engine Questions Thread

    Any info on here to upgrade to mpfi got a bad fuel pressure regulator looking to replace spider thanks
  14. 96z71sas

    Dodge leaf spring on solid axle 28x24

    They are off a 79 f350 I tried to measure them on the truck and that don’t work 28 and1/8 and 24and a quarter or something don’t remember that’s y I like Chevy they are 25 and25 makes more sense thanks for your help
  15. 96z71sas

    Solid axle not straight

    They were 52s from 79-80 f350 I tried To measure them on the truck and that don’t work the pin was off set a little they were 28 and 24 Thank you for your help
  16. 96z71sas

    Solid axle not straight

    Hey you were right they were both bent and that was why the axle moved it twisted and moved wheels back and other forward they were bent opposite of each other if that makes sense thanks for your help
  17. 96z71sas

    Gmt400 parts

    I’m looking for a grille and driver side fender but fender must be black thanks
  18. 96z71sas

    Dodge leaf spring on solid axle 28x24

    Thanks I think there off back of ram charger or pickup I’m thinking of just getting Chevy 52s and drilling a hole in perch just til I get more money together they are hard to find online
  19. 96z71sas

    Dodge leaf spring on solid axle 28x24

    I got one I’m just stumped on I have 96 k2500 with Dana 44 from 79 f250 now I need new leaf springs I measured 52 inch leafs but there not Chevy those are 26x26 from center bolt these are 28x24 there off a dodge anybody ever heard of using rear leafs off like a ram charger or dodge pickup? I ask...
  20. 96z71sas

    Solid axle not straight

    So I figured out my leafs are bent there 52s so there Chevy but are they from the rear cause I don’t think 52s were on the front 73-87 I believe
  21. 96z71sas

    Fuel pressure

    Anybody ever heard of standard motor products they have the mpfi setup for around 300 on rock auto the ac delco is like 430 can’t swing that right now
  22. 96z71sas

    Fuel pressure

    I wanted mpfi anyway heard a lot of good things about it I don’t want to pull it apart just for fpr I want a ac delco but there expensive I don’t trust off brand tho
  23. 96z71sas

    Fuel pressure

    I got it off jumped relay but couldn’t see any drip but with the mirror it’s definitely wet under spyder and the carbon is gone under it intake clean aluminum lol I think it’s the regulator thank you for your time your a big help
  24. 96z71sas

    Fuel pressure

    Idk if you can see but it’s a little wet it seems I can’t see any leaks guess I’ll try regulator I wanted mpfi upgrade anyway
  25. 96z71sas

    Fuel pressure

    Thank you so much for your help I will try this
Top