Search results

  1. evilunclegrimace

    would you by it?

  2. evilunclegrimace

    1997 K 1500 SCSB complete Tan interior for sale.

    I am parting out a '97 pickup with 58,000 miles on it I have a complete tan interior. I also have a push button Transfer case. If any one is interested let me know. The seats are 60/40 with a fold down center arm rest. TIA.
  3. evilunclegrimace

    The '98 trans gave up the ghost.

    The wife left this morning to visit family and made it 20ish miles from the house,she called saying that the suburban was not shifting into 3rd gear correctly and when it did it was slamming into 3rd gear. I had her turn around and limp it home so we could swap her over to the '92 k1500. After...
  4. evilunclegrimace

    Cylinder head stud kits?

    Any one have a recomendation on a head stud kit other than ARP? Speedmaster? BlackHorse racing? others?
  5. evilunclegrimace

    6 button A/C-Heater control hear for my '92.

    I need a 6 button control hear for my '92 K 1500. Does any ne have a spare they are willing to part with. Also does anyone have a decomendation on a shop to repair these heads?
  6. evilunclegrimace

    A/C compressor short cycling, a bit of advise please.

    OK,1998 K1500 Suburban,5.7 4L60E. The truck came with the A/C system inop. I finally got around to repairing it. I have replaced the following due to the fact that the system was open when I bought the truck, drier, condenser, orifice tube, compressor ,high pressure switch and the hose...
  7. evilunclegrimace

    1997 K 1500 parts truck

    I just picked this up two weeks ago. A friend had it for years and the frame finally rusted out under 59,000 miles. I bought it for the engine. It looks like there are alot of good parts. Here are a few pics
  8. evilunclegrimace

    Wanted 1988 - 1998 K1500 short wheel base frame.

    I am looking for a frame for my 1990 K 1500 RCSB. If anybody has one or has a line one please let me know. I would like to stay under a days drive from Erie Pa. Thanks.
  9. evilunclegrimace

    Front axle spacer part number

    For all of you guys that keep asking about a spacer to install when installing a new actuator. here is the PN,15002405. It is listed as discontinued but I found it in stock at gmpartscenter.net
  10. evilunclegrimace

    Best battery isolator?

    I am looking to install a battery isolator in my '98 Suburban. I have a video camera and regularly forget to disconnect it which leads to a discharged battery. I am thinking about hooking the starter motor to one battery and the rest of the truck to the other so that when I have a brain fart, I...
  11. evilunclegrimace

    Replacing cluster gauges

    I recently had to replace my cluster and that involved changing the printed circuit for the speedo. I had to remove all of the needles and do not remember the procedure for reinstalling them so they read correctly. Anyone know the proper procedure?
  12. evilunclegrimace

    1992 instrument cluster needed

    My '92 K 1500 lost the left half of the dash lights. I pulled the cluster and installed all new bulbs and the left side is still not lighting up. I am in need of a printed circuit but the easiest thing to do is swap a different cluster in. If anyone has a line on a '92 cluster w/tach shoot me a...
  13. evilunclegrimace

    Certification labels

    I have a 1990 GMC C1500 and a 1988 Chevy C1500 that I need a clear picture of the certification label so that I can apply for a new Titles for each of them. My home state charges registration fees based on the cert. label and both of my trucks are too faded to be read. Does any one have a...
  14. evilunclegrimace

    fuel line adapters.

    Ok, a while back someone here asked about fuel line adapters for their diesel truck. I posted some info in response and said that I would look into finding better info. I thought it would be better to post a new thread so the info would not be buried in the back of an old thread. Well,,, I...
  15. evilunclegrimace

    I am looking for interior door handles.

    Does any one have a set of interior door handles for a '98 Suburban in gray? I need the Drivers side for sure and would like a passenger side for backup down the road. Thanks.
  16. evilunclegrimace

    Broken head bolt .

    This is a first. In 47 years I have NEVER broken a head bolt off in an engine block. ( and I still have not) This started as a blown head gasket on the drivers side between cylinders 3 & 5, not a big deal for a truck that has 276,000+ miles on it. Pulled the drivers side head and cleaned...
  17. evilunclegrimace

    GM P/S flow control P/N's?

    Hey guys, I am looking for a flow control valve for my P/S pump with an internal bore of 0.130, it is a 2.5 GPM flow control valve. Does any one know of the part number or what vehicle would have this flow control valve?
  18. evilunclegrimace

    High beam indicator light out

    Hey guys, a quick question on my '98 Suburban . The high beam indicator light just went out and I don't have a wiring harness manual handy. Is this on a circuit with anything else? or is this a pull the cluster and change the bulb? Thanks
  19. evilunclegrimace

    looking for part numbers.

    The wife came home from work with the '98 Suburban just steaming away. :banghead: The plastic tee for the heater system cracked and was spraying coolant on the passenger side manifold. Rockauto does not seem to have the tee's. SO,,,, Does anyone happen to know the PN's for the coolant tee's? Thanks
  20. evilunclegrimace

    1998 Suburban Ground Question.

    I bought a '98 Suburban from JackE's brother a while back and am in the process of getting it up to snuff. The engine and trany were changed when I bought it. I have done all of the basic maintenance and decided to upgrade the power cables. I have changed the grounds on the passenger side from...
  21. evilunclegrimace

    92-94 console pieces.

    Hey Guys, I am looking for a few pieces for a 92-94 console. I bought one on line from a pick in pull and they did not send it complete. I need the front cup holder, a lock mechanism and catch and the rear filler piece that fits under the cover. Thanks.
  22. evilunclegrimace

    Passlock question

    Here goes, I bought a '98 Suburban and from what I understand it has the passlock system in it. I have not had any problems with it yet(knock on wood) I have read the threads about eliminating the system with resistors and or switches and I had a thought. Is it possible to find and install a...
  23. evilunclegrimace

    Pick and pulls in Knoxville Tn.

    Hey guys. I am visiting in Knoxville and thought that I might go yard hunting for some parts that I need. Anyone have a recommendation near 37921 area code? I am thinking about lookin at Lamberts on Clinton Highway.
  24. evilunclegrimace

    Differential Set up Trick

    I have been trying to find gear marking compound to check the GTCP (gear tooth contact pattern) on a diff I have that needs a new pinion bearing so that I can reuse the gears and not have any problems down the line. None of the parts store carry the good old yellow marking grease and I did not...
  25. evilunclegrimace

    Loose wire under engine

    I need a little help. I bought 1998 suburban and in the course of performing some maintenance I found a loose plug under the engine, It is a red 2 wire plug body that is in the wire loom just past the crank position sensor. Anyone one know where it belongs? Thanks in advance

Latest posts

Members online

Total: 860 (members: 14, guests: 846)

Forum statistics

Threads
64,242
Messages
1,389,565
Members
51,219
Latest member
1989Bowtie

Share this page

Top