Search results

  1. Richard Jones

    Rally wheels 15x8

    Yeah i just found a pretty clean set of 4 15x8 for $200. It's about a 45 minute drive but seems like it might be worth it considering $430 is cheapest i found used online so far. I remember when these were easier to get haha
  2. Richard Jones

    Rally wheels 15x8

    Where have you found them new? Id be more interested in new. Let me know please, thanks.
  3. Richard Jones

    Rally wheels 15x8

    I am in KC
  4. Richard Jones

    Rally wheels 15x8

    anybody have any for sale? I see these all the time until I need them lol. Let me know, thanks. 15x8 5x5
  5. Richard Jones

    High Idle

    I had a high idle problem for about a month, had to go through all the trial and error methods to find the problem, ended up being the connector on the IAC. I plugged the IAC hole and it ran fine, replaced the IAC and nothing, replaced the plus for the IAC and problem solved. You didn't mention...
  6. Richard Jones

    Cam or gears (help please)?

    A lot of good information here, I am in the process of building a 383 stroker and trying to decide what to do about a cam, my current gear ratio is 3.08 and most people tell me I should go to 3.73 so I'm just trying to figure it all out. It's a 5 speed with 29" tires and I'm usually at about...
  7. Richard Jones

    Do they make externally balanced flywheel...

    Thank you. I was just worried for a minute that I would have trouble finding it, I didn't know all 1 piece were externally balanced. I bought a motor that had the rotating assembly with it already.
  8. Richard Jones

    Do they make externally balanced flywheel...

    Do they make an externally balanced flywheel for a one piece rear main block for my NV3500? I'm building a 383 stroker and am confused on this. It's my first build... Point me in the right direction please!
  9. Richard Jones

    How can I go lower?

    I agree with you. I like how it sits with my current wheels but I'm getting 20" wheels and will definitely want it lower. I don't have the stock parts but I could get some I'm sure.
  10. Richard Jones

    How can I go lower?

    If I moved the spring to the other hole to achieve 7 wouldn't I still need to notch?
  11. Richard Jones

    How can I go lower?

    Thank you, I should've been more specific because this was my main concern, I don't have the stock ones any more so want sure how I could bring the rear down. I'd definitely be interested in moving the spring to achieve 7 I never knew that was possible...I'm gonna take a look at it after work...
  12. Richard Jones

    How can I go lower?

    Ok so I'm that guy that has to learn the hard way haha. So I have a DJM 3/4 drop installed, I love it. But I'm considering going a different direction and was wondering how I can get to 4/6 basically...I am using 3" control arms for the front which are fine, but in the rear the shackles and...
  13. Richard Jones

    Need help on rebuilding my l31 into a 383

    I'll definitely read the thread at that link. I didn't think you could get even just a block from summit for $1200 and I think the bottom end parts average around $800-900. I'll look into it, would be an easier route
  14. Richard Jones

    Need help on rebuilding my l31 into a 383

    Yeah that's kinda what I thought. I'm gonna have fun in it but not beat it up. I'm gonna be too deep in it to do that lol. I believe it will last, the clutch will be new. So now just gotta figure out the motor part.
  15. Richard Jones

    Need help on rebuilding my l31 into a 383

    I am just about to start the process of either having a 383 built or buying a built bottom end. I have a 95 with the NV3500 fine speed transmission, my only worry is that the 383 is too much power for the trans. What do you think? I know people have done it before. I haven't purchased anything...
  16. Richard Jones

    "395" ramjet cam on stock computer tune. Anyone running one?

    I'm another from the middle of the map
  17. Richard Jones

    95+ Aftermarket Steering Wheel

    I've read multiple things about putting an aftermarket wheel in a 95+ but I'm just wanting to see if this looks right. Anybody with any experience that has replaced one before? If I wanted this wheel would this be the adapter I need or am I backwards on that? I have no experience with interior...
  18. Richard Jones

    2/4 drop tire size

    This is exactly what I'm trying to do. Chrome Ridler 650 staggered. Trying to figure out how I can make it work. And want same brand tires but obviously different size and I need them to tuck... Impossible maybe?
  19. Richard Jones

    2/4 or 3/4 Drop Kit, what size tires for Rally 15"s?

    Looks good. I like the black grille. And the wheels. I actually have the same, how can I tell if my front wheels are skinnier than the back? I know my front tires are smaller but I just always assumed all 4 wheels were 15x8. You made me start to wonder lol. Is there a stamp or anything on these?
  20. Richard Jones

    2/4 or 3/4 Drop Kit, what size tires for Rally 15"s?

    I went with DJM because somebody I know has it and his rides perfect, mine rides perfect also. My only complaint is my rear is not low enough but I am looking into fixing that. I talked to sewlow about it and believe my truck was actually a little higher than normal to begin with. Might be my...
  21. Richard Jones

    2/4 or 3/4 Drop Kit, what size tires for Rally 15"s?

    Like I mentioned I run DJM LCAs in the front for my 3'' drop and have no issues at all. Rides perfect. Stock shocks up front and original UCAs also.
  22. Richard Jones

    2/4 or 3/4 Drop Kit, what size tires for Rally 15"s?

    My front is dropped 3'' with DJM LCAs with a 15'' rally 235/70/15 no issues at all. Still on stock shocks up front and rides perfect.
  23. Richard Jones

    1998 400SS

    Could be alignment. Has it been in an accident? Is the frame somewhat straight
  24. Richard Jones

    The Shock Thread

    Are they any good?
  25. Richard Jones

    95 C1500 build! Dropped, LS swap, paint!

    What did you use for the 4 drop in the front?

Latest posts

Staff online

Members online

Total: 1,384 (members: 43, guests: 1,341)

Forum statistics

Threads
64,242
Messages
1,389,554
Members
51,217
Latest member
jsaders1

Share this page

Top