Search results

  1. joep88cheyenne

    Patch?or stock?

    I agree it looks like a patch. If oem, it would be inset with a lip under it and screwed down. So it would not be snagging anything loaded into the bed. Possibly have a gasket to keep dirt, noise and fumes from coming up through it.
  2. joep88cheyenne

    Question of body types Suburbans and Tahoes

    Thanks. Yeah they have grown. Just being behind and then beside the newer Tahoe I saw gave me pause as to the real difference in them. Mine had the 5.7and 60e tranny ( coughed up and lung and had to have a rebuild.) It had a )2 sensor that would not stay reset, and when I found my 88 cheyenne I...
  3. joep88cheyenne

    95 350 Doesn't Like Low Speed

    Yeah that rotor didn't look good IMHO. Their cheap so replace and yeah brass teonal in the cap would be a positive. I did see that white power coating on those terminals. So a scrape or replace it also.
  4. joep88cheyenne

    Idle problem

    Try spraying wd40 around your vacuum lines to see if it runs up in idle, if so where the spray was last would indicate a leak, hose off or cracked hose.also around the base of the TBI spacer, and TBI base. Eliminate some simple issues It could be inconsistent fuel flow, like filter or dirty...
  5. joep88cheyenne

    Question of body types Suburbans and Tahoes

    My early childhood recollections, late 50's and 60's of these vehicles were 2 door, 3 door and early 4 doors "boxes" called Suburbans. Somehow as I got older I heard of "Tahoes" and pictured them as smaller vehicles. Now I acquired a 97 Tahoe and my original picture went out the door. So when...
  6. joep88cheyenne

    fuel pump relay 98 5.7

    Schurkey, that for the limp home mode. Had a kia that went into limp home but I ran about 1/4 mile and died then had to restart and repeat process. That was no fun. Dealer had to replace comp.
  7. joep88cheyenne

    Sold

    Yeah could do that. But payday is a few days away. I'll have to wait and see if you sold them by then. If you get an offer I'll understand.
  8. joep88cheyenne

    Chevy Truck Legends

    Darn! I have owned 5 Chevy trucks, a 55, 62, 69, 97 Tahoe and my 88 I have now. None bought new. Only new truck was an 81 f150 (don't hate me) that I drove until 1998. So I don't qualify for legend status. But missing the 73-87 grouping for a straight run on Chevys.
  9. joep88cheyenne

    Sold

    Nice, about what I was told for a set of the ones from the 97 and up ROMs Where ya located? I'm in the dfw area
  10. joep88cheyenne

    Hood Won’t close all the way

    If you got just the cowl and install it onto yourhood the process could have changed the fit. By heating it (welding) or pressure on center with it on uneven surface.
  11. joep88cheyenne

    Hood Won’t close all the way

    You purchase just the cowl or a full hood? Try the original if you got a full hoof. Then you should be able to judge if the new has an issue.
  12. joep88cheyenne

    Parasitic drain

    Couple of other thoughts come to mind... Other vehicles I've had the glove box lamp would drain. Also lamps on visors for the mirrors. If so equipped. Maybe clock on radio. And a silly loaded question was aux lights ever installed or strange non OEM wires here and there. A po may have added then...
  13. joep88cheyenne

    Hood Won’t close all the way

    Hood warped? And hinges well lubed? These came to mind when you said nothing hitting and latches and bump stops adjusted.
  14. joep88cheyenne

    Wheel help

    What size was it? Need to add it to my trivia file.
  15. joep88cheyenne

    Low voltage

    Mine just melted the ac pulley on my 97 6.5 Tahoe locked up. It did ruin the belt though. Have to buy a bypass pulley while searching options. Used this as part payment ony 88 Cheyenne. I would check the idlers also. As there should be enough ooohump to move that belt.
  16. joep88cheyenne

    Rear Axle Lift-SOLVED-

    I am not a techie has such just shade tree as that is the way I learned. If you were going to fab hangers I would go with the 5/16m and then add gussets below the frame and and a backside bracket support on the inside. Use the spring shackle brackets and have the spring side be long enough to...
  17. joep88cheyenne

    Awesome Spare Tire Carrier Idea

    Looks like a desert runner attachment.. and with that size tire easier then trying to muscle it underneath. but since mine is a working truck for me to haul stuff around wouldn't work for me ( I also have stock 15's on mine.)
  18. joep88cheyenne

    It's dead Jim

    If you're sure the gauge is the issue... order a replacement Gauge and while in there replace the lamps.. since you have the dash opened up. I have an 88 so can't help on bulb types and such. Mine are 194 or 168s the 94's are lower wattage and the 68 are higher, even though they are...
  19. joep88cheyenne

    Standard or HD chassis/ breaks

    Check the rpo codes on the glove box door and look it up. unless it has been replaced. . Other folks will chime in I'm sure.
  20. joep88cheyenne

    Where do tie down straps?

    I have always run eyebolts and fender washers thru stake holes. Which reminds me I gotta do that with my 88 rclb still.
  21. joep88cheyenne

    Fed up with vibration issue

    Might want to check engine mounts unless you know they have been replaced. Transount bolt loose may have affected the engine mounts. Just out of the boxing here.
  22. joep88cheyenne

    What Push Bar/Bumper Bar is this?

    PD seconds are ones that have been installed on the Tahoe's (at least around TEXAS) and the Tahoe are then sold at auction, with the radios and State, county or city removed
  23. joep88cheyenne

    What Push Bar/Bumper Bar is this?

    At first it looked like a Bully bar.I am wanting one for my trick. But the wingouts say it isn't. Haven't seen that style. But may want to talk to a Leo station. Could be a PD second.
  24. joep88cheyenne

    Courtesy circuit

    Glad you found it.
  25. joep88cheyenne

    98 C2500 popping noise

    Upper a frame bushings need replacing? Might want to check cab mounting bushings also.

Latest posts

Members online

Total: 1,286 (members: 37, guests: 1,249)

Forum statistics

Threads
64,255
Messages
1,389,925
Members
51,252
Latest member
Smittyrcsb

Share this page

Top