Search results

  1. HotrodZ06

    Overhead console swap into 93 RCSB ?

    In my RCLB it had no provisions but, my ECSB did have the provisions. In the RCLB I had to center the front drill the hole for the front screw cut the legs off the back and center rear then put 2 screws inside the CD holder compartment.
  2. HotrodZ06

    Free to me GMC 2500

    I would every little bit helps especially if its big order, and if you make sure everything is coming from the same warehouse shipping is cheaper.
  3. HotrodZ06

    L31 Extreme Budget Build

    I need fuel economy like that in my truck.
  4. HotrodZ06

    Free to me GMC 2500

    A whole lot of my parts come from buying cheap parts vehicles that can't be saved but door handles seem to already be broken lol.
  5. HotrodZ06

    Free to me GMC 2500

    That's not a bad price for OE as long as they don't make up for it in shipping.
  6. HotrodZ06

    Free to me GMC 2500

    Rock Auto has some but don't buy the cheapest ones they got, they are super flimsy.
  7. HotrodZ06

    Free to me GMC 2500

    I had to rewire one that had telephone wire to wire up the trailer connector
  8. HotrodZ06

    Free to me GMC 2500

    My 98 is a L31, NV4500, NP241C, 10.5 full floater came from the factory that way. Not sure what is the determining factor for getting a 10.5 but not all 5.7 came with 9.5.
  9. HotrodZ06

    Really wish ppl would stop bringing me trucks with hydraulic fluid in trans

  10. HotrodZ06

    L31 Extreme Budget Build

    That was a quote from another thread i was reading listed as a budget build showing the subjective nature of "budget" lol
  11. HotrodZ06

    L31 Extreme Budget Build

  12. HotrodZ06

    L31 Extreme Budget Build

    All depends on your definition of budget, very subjective depending on the person.
  13. HotrodZ06

    L31 Extreme Budget Build

    Thanks for the information definitely hitting them on holiday weekends lol.
  14. HotrodZ06

    L31 Extreme Budget Build

    How do you get into the summit bargin cave at arlington? Only been there once so much going on with a House of Hotrods car show didn't even know it existed.
  15. HotrodZ06

    91 silverado AC parts required for R134a

    As far as I understand the biggest concern is making sure you use compatible a/c oil. R134a takes PAG46 I believe, might check the service manual for a 94 or 95 they should have the same components but would have came with R134a from the factory.
  16. HotrodZ06

    4L60E Shift pattern is 1-2-1-2

    I can almost guarantee it will need 3-4 clutches replaced. I would get a factory unit repair manual (it is a factory service manual for repairing transmissions and transfer cases) for the year of your truck if possible, if not as close to as you can. They are usually on ebay for a decent price...
  17. HotrodZ06

    No-Start Vortec 350

    Have you checked fuel pressure? If its not high enough it could cause a no start.
  18. HotrodZ06

    No-Start Vortec 350

    Possible I would look at the service numbers on the pcms that should tell you what year it is off of, as far as I know every year had a different service number but could also bleed over if early or late built.
  19. HotrodZ06

    No-Start Vortec 350

    I just bought a truck with the same issue. Guy I bought it from couldn't make it startup. After a compression test pulled the cap and rotor was 120° out. Fixed that still no start check fire at coil, it was good. Moved to fire at #1, no fire. Replaced cap with known good cap runs like a champ now.
  20. HotrodZ06

    Hello all

    Love the name seems to fit the truck perfect. Looking forward to seeing what you do.
  21. HotrodZ06

    thinking about putting a new radio in any suggestions? (88-94)

    And with the single din route you can get a cubby hole for the radio control by the guages or add a panel for switches, another guage or whatever else you could mount there.
  22. HotrodZ06

    Sylvania Composite headlight adjusters frozen

    That definitely would be better I need to get some of that.
  23. HotrodZ06

    Sylvania Composite headlight adjusters frozen

    I squirted wd40 in the ones I had stuck and slowly worked more and more in until they would turn freely. Its definitely time consuming.
  24. HotrodZ06

    at a loss. replaced MAF

    It doesn't show an out of range code, either low or high in the service manual.
  25. HotrodZ06

    at a loss. replaced MAF

    Did it throw any MAF codes with the delphi sensor? and what was the code number it set with the original MAF?

Latest posts

Members online

Total: 1,737 (members: 19, guests: 1,718)

Forum statistics

Threads
64,334
Messages
1,391,489
Members
51,439
Latest member
sherberto

Share this page

Top