Search results

  1. Justin S

    This must be the most lowered GMT400 ever

    Saw this on Instagram.
  2. Justin S

    8.5 10 bolt 30 spline carrier to 28?

    Not exactly a GMT specific question, but its a fairly universal rear end figured I'd throw it out there. I have a Buick with an 8.5 10 bolt with 2.56 gears and i want to put in something like 4.10s. I already know to do this i need to swap the carrier due to the ratio change, and i know the GMTs...
  3. Justin S

    Rocky: The Redneck Plow Truck

    Haven't posted on here in a while, but just picked up a new plow truck to replace my "$2000 Rock Crawler". This is a 1998 K2500 rclb, so now i have two. Came across it on craigslist dirt cheap, so i jumped on it. My current plow truck is a 1500 with a v6, and has a light duty home plow, and I...
  4. Justin S

    8.5 10 bolt diff cover

    Selling a 10 bolt diff cover, slight rust. Make an offer!
  5. Justin S

    SOLD Aztec Needles

    Went to the junkyard and found a couple Aztecs and raided them for the needles. You would only need 6, two long and 4 short, but ill sell all of them together so you can choose which ones you want to use. Stock needles are in picture to show the difference, ill throw those in too if wanted. Make...
  6. Justin S

    Instead of a Blackbear tune, what about a Brown Bear one?

    Yes, stupid joke, but saw this, and of course immediately noticed the truck :D https://www.littlethings.com/bear-charges-car-alaska/?utm_source=amiri&utm_medium=Facebook&utm_campaign=animal
  7. Justin S

    Whyyyyyyy

    https://fingerlakes.craigslist.org/cto/6154781374.html
  8. Justin S

    Justin S's non GMT400 projects

    Figured i'd make a thread for all of my other current projects and vehicles that take time away from my GMT's. I never know how long i'm going to have some of this stuff, and I never know when i'm going to find something new and interesting so i'll just lump them all together. I'll start with...
  9. Justin S

    Good Quality seat cover for 60/40 bench with console?

    I'm looking for a seat cover for my 98, it has the 60/40 split bench with center console, no armrests. I've been trying to locate something that will fit good over this style seat that's not one of those universal jobs that will pop off every time I get in or out. I don't care so much for...
  10. Justin S

    Only $38000 and this could be yours!

    “Minor cosmetics, minor oil leak, normal 6.5 Diesel ticking, always has puffed a little white smoke ” :roflbow: :roflbow: http://www.ebay.com/itm/1995-Chevrolet-C-K-Pickup-3500-K3500-/232127903323?forcerrptr=true&hash=item360be6b65b:g:akUAAOSwCGVYATjA&item=232127903323
  11. Justin S

    I want some of what this guy is smoking

    This was shared on the facebook page. :3811797817_8d685371 https://maine.craigslist.org/cto/5840222810.html
  12. Justin S

    $2000 1996 K1500 Rock Crawler

    Just kidding.... Here's my newest addition, a 1996 K1500 ECSB Vortec 4.3, NV3500, 3.73s. Out of the 12 or so of these trucks i've owned, this is my first extended cab. Picked it up as seen for $300, It was previously used in a Bog n Grog event, and the owner was just looking to sell it instead...
  13. Justin S

    Lots of random GMT parts

    Figured i'd just lump some of this stuff into one post. I have a whole bunch of random stuff i'm selling, obviously some of this would be local pickup only, but all of the small stuff I can ship. To start, I have some driver quality fender trim, they have some dings and some of the screw...
  14. Justin S

    '98 K2500 RCLB 454 NV4500 Daily/Hauler

    Figured i'd get a thread started now that the truck is officially paid for! I now own a 1998 Chevy K2500 RCLB with a 454/NV4500 setup. I've been rummaging through craigslist ads for over a month waiting to find the right truck, I was being very picky. Finally came across the perfect one, but...
  15. Justin S

    15" rims on K2500 8 lug?

    I'm in the process of buying a 98 K2500 8 lug truck (14 bolt SF). I know it has 16" rims from the factory. I have a set of tires and rims I would love to put on, but they are 15". They are also 6 lug, they were off of my old truck, so obviously i'd need adapters, which I found online for...
  16. Justin S

    94 Honda Civic Beater/DD/Rally Car

    Figured i'd make a page for my Civic, just because. Its a 94 DX, 1.5 5spd, currently 225000 miles. I bought it at the end of 2012 for $200. At the time, it just needed exhaust work, and a windshield. I wanted to get something to run around in that got better mileage than my truck. The only...
  17. Justin S

    1989 GMC Sierra ST. Aaaand now I have 3.

    So yeah, I admit i'm addicted to buying cars. Since my other short term project/supposed to be driver seems to be having some trans issues, I went ahead and bought this beater for $450. Its a 1989 Sierra ST, 140k, 350 5spd, 3.42 rear. Obviously the body is pretty beat, but I don't care. It...
  18. Justin S

    Misc 88-94 interior parts, $2 plus shipping

    I got these parts along with the truck I just bought, and don't need any of them. All of it is in good shape, the door handle piece does have some plastic broken around where the bolt goes through, but would hold fine. I'll sell any of it for $2 per piece, plus whatever shipping is, just so it...
  19. Justin S

    Aaaand I bought another one

    So, I wasn't really planning on buying another truck anytime soon, but long story short, I now have a 1992 GMC Sierra K1500 RCSB. It is going to me my temporary daily driver/hauler until I find the perfect 2500 pickup. Anyways, I found this on Craigslist, was only 5 minutes from my house...
  20. Justin S

    Two local trucks

    First one looks rough, but yet still cool. If I needed a beater, i'd jump right on it. The other one looks like its had a bunch of work already done and the price seems pretty cheap! http://fingerlakes.craigslist.org/cto/5627540512.html http://fingerlakes.craigslist.org/cto/5628054996.html
  21. Justin S

    Anyone Ever Used An Engine Dyno?

    I've been tossing up the idea of having my engine broken in and tuned in a shop with an engine dyno before going in my truck, vs doing it myself once in the truck. Has anyone ever done this before? I know there is a shop about an hour from me that has an engine dyno, but I have no idea how...
  22. Justin S

    Unopened gallon of Semi Gloss POR15

    I bought this for my project, but ended up going a different route. It is an unopened gallon of Semi Gloss POR15. I paid $130 for it online, but if someone wants it, i'll ship it anywhere in the US for $115. I have paypal.
  23. Justin S

    Turd's last drive

    Finally uploaded the videos from my parting out of Turd, my 1992 C1500 parts truck. Retired at 347588 miles. Here's a few pics of it from when I got it, then dissassembly, to current state. The frame is being used for my other project truck.
  24. Justin S

    U bolt brackets for 10 an 14 bolt rears, sandblasted and painted

    I have two pairs of U bolt brackets, one pair are from a 1992 C1500 with a 10 bolt, the other pair are from a 1990 C2500 with a 14 bolt. I gave them all a quick sandblast and paint job so they look nice, but they aren't perfect. I'd like $35 for each pair, that includes shipping to anywhere in...
Top