Search results

  1. ZachT

    14 Bolt Full Float G80 Differential Replacement

    Hmm sounds like the TrueTrac might be the way to go for me. I think the Detroit might be overboard for what I need.
  2. ZachT

    14 Bolt Full Float G80 Differential Replacement

    How would the TrueTrac work on gravel? I will really only use this to tow and haul, it's not my daily driver anymore.
  3. ZachT

    14 Bolt Full Float G80 Differential Replacement

    I don't want to go cheap on this truck, I did that with the fuel pump and paid the price. I would like to keep this truck for a long time. I only know of ARB from guys with Tacomas.
  4. ZachT

    14 Bolt Full Float G80 Differential Replacement

    I was wondering what everyone's thoughts are on replacements for a G80 locker. I have a 98 C2500HD with the 14 Bolt Full Float w/ the G80, and I know the differential needs replaced. I've been looking at Eaton TrueTrac, Eaton Detroit Locker, and ARB Air Locker, but I don't know enough about...
  5. ZachT

    Big 3 and Dual Battery Kits

    Dumb question, what's the purpose of the fuse between the battery and the alternator? Sent from my Pixel 2 using Tapatalk
  6. ZachT

    Post your lifted 2wd's!

    It's the same overall diameter but 285's are bout 3/4" wider
  7. ZachT

    Post your lifted 2wd's!

    I would not go with the spacer lift. I've noticed excessive wear with the spacers I did on my 2500. Do it right and go with the spindles and raise the rear with some add-a-leafs.
  8. ZachT

    Post your lifted 2wd's!

    Daly How tall would your new truck be if you leveled it and put 33's on? To top of cab Sent from my iPhone using Tapatalk
  9. ZachT

    Show me your brush gaurds!

    Let me know. It has a 14" LED bar on it if you'd want it. It needs some touch up paint but not too much. Sent from my 98 454HD
  10. ZachT

    New from Iowa

    Welcome. I didn't know there was more than two of us from Iowa on here Sent from my 98 454HD
  11. ZachT

    Show me your brush gaurds!

    Come to Iowa I'll sell you my old one Sent from my 98 454HD
  12. ZachT

    1998 C2500HD

    I could care-a-less about emissions. I have no intentions of registering this in a state that has testing. Size is the big issue but there are some actual performance issues Sent from my iPhone using Tapatalk
  13. ZachT

    1998 C2500HD

    Way too many issues with that engine for me. Sent from my iPhone using Tapatalk
  14. ZachT

    1998 C2500HD

    Not going to put an international in there. I work for Deere and have a much better knowledge of the engines they have, also if I wanted a 6 cylinder I would put a 6068 in. It is not my intention to weld this frame myself. I will most likely have this sent out to be done. Sent from my iPhone...
  15. ZachT

    1998 C2500HD

    Couple pictures of my frame design, I don't have any holes for the bed mounts, no welded brackets for cab mounts or leaf spring hangers. The frame will be made out of 3"x6"X1/4" tubing, cross members are the same. The rear frame is based off GM Upfitter's dimensions for a gmt400, and the front...
  16. ZachT

    1998 C2500HD

    After some discussion with a couple mechanic and engineering friends decide to change a little bit about my build future. Instead of trying to drop a 4.5L John Deere diesel in. I'm now going to be making a custom frame for the truck. My design is based off an 80's K20 that will retain the...
  17. ZachT

    Kanati Mud Hog review.

    Michelins are made in America and some Pirelli's are too. BFG makes some here too I think. I wish they made trail hogs in 285's. I like the mud hogs but the trail hogs are a little less aggressive Sent from my iPhone using Tapatalk
  18. ZachT

    Kanati Mud Hog review.

    When I worked at a tire shop I sold a good amount of Greenball tires. I liked the look of em and compared to Goodyear MTR's or BFG KO2 they balanced wonderfully. I thought they were all made in China though Sent from my iPhone using Tapatalk
  19. ZachT

    1998 C2500HD

    Well finished most the painting in the garage and put the trim back up and put some vinyl mop board along the base on my garage. I only need to paint the section where my tv is now. Hopefully once this is done I can have a good place to work on the motor I have for the truck Sent from my...
  20. ZachT

    Lift spindles c250o gauging interest

    How much you willing to sell them for?
  21. ZachT

    1998 C2500HD

    That's true, and to each his own. It just seems like when a company goes through three major engine changes to a single line that company is obviously doing something wrong. I never understood why Ford switched from International to Navistar, it took 8 years for them to get an engine that was...
  22. ZachT

    1998 C2500HD

    That's how it should be. My brother-in-law bought a 2004 6.0 F350 for 18k. All he's done is thrown money at it and it still has issues and it was "bulletproofed" when he bought it. Sent from my iPhone using Tapatalk
  23. ZachT

    1998 C2500HD

    Out in Colorado that's go for 5-6k Sent from my iPhone using Tapatalk
  24. ZachT

    1998 C2500HD

    What makes it worst is people are buying it Sent from my iPhone using Tapatalk
  25. ZachT

    1998 C2500HD

    I have no rust on the truck and I see guys round here with rusted out trucks like mine with 200k+ miles selling for $5k Sent from my iPhone using Tapatalk

Latest posts

Members online

... and 4 more.
Total: 1,401 (members: 54, guests: 1,347)

Forum statistics

Threads
64,232
Messages
1,389,272
Members
51,183
Latest member
Kogan

Share this page

Top