Search results

  1. plouth

    Pre-Runner Tire mount and fab tailgate plates

    the mount is from Fabtech. It's a 3 point bolt in mount that will hold a 35inch tire. Mine is a 37inch tire but I let it hang over the tailgate area. Works really well just get grade 8 bolts and washers to mount. With a 35 inch tire you could mount jerry cans on both sided with a standard bed...
  2. plouth

    step side roll pan

    Ok so now I understand why the draft angles were not the biggest deal to people. Didn't realize till after I removed the bumper the SMC bedside was cut in that area so it will clear. I installed the rollpan and man what a pain in the ass, and I'm not really to happy with how it came out. I may...
  3. plouth

    overhead console in standard cab

    ok so it took a bit longer to get all the things I wanted to do done. Took the overhead apart, and cut the tabs and just drilled into the sub roof sheetmetal. Worked like a charm. Before I did that I recovered part of it with some black perf leather to match the SS seats. Also added in two...
  4. plouth

    step side roll pan

    don't have the bumper off yet or the pan fitted. I took some pictures of the roll pan ends, please take a look at the draft flange on the pan. You will notice the flange lip wont let the pan lay flat on the SMC bed ends.
  5. plouth

    Pre-Runner Tire mount and fab tailgate plates

    you looking for info on the bed brace plates or the tire carrier?
  6. plouth

    step side roll pan

    The end circled has me confused a bit. This piece do you guys just over lap the actual SMC with new roll pan so it sits ontop? Or do you trace the shape on the SMC bed and cut the shape out to match. I ask because normally I would just overlap, but the metal rollpan on the edge circled has a...
  7. plouth

    step side roll pan

    how did you fit the end of the roll pan? Mins has extension parts and trying to figure out if i need to cut the SMC of the rear bed to match the curve of the pan ends.
  8. plouth

    Pre-Runner Tire mount and fab tailgate plates

    thanks, I try to do a good job and not half ass things. Thanks for the thumbs up!
  9. plouth

    Pre-Runner Tire mount and fab tailgate plates

    the gas cans are not real they look like Jerry cans but they are storage cans. The top flips up on a hinge and I can lock it. Great for tools and jumpers. The flares are actually stock stainless steel fleet side accent flares. They say they don't fit for stepsides on the websites, but as you can...
  10. plouth

    step side roll pan

    so I ordered a roll pan for my step side, it showed up and I'm trying to figure out why it has the strange ends on both side, where a fleet side is just straight. Looking at pictures in the interweb it looks like people keep the ends, so I have a few questions since i can't find a write up on...
  11. plouth

    Pre-Runner Tire mount and fab tailgate plates

    yea, Oakland can be a tough place if you like your stuff, haha. No I don't work for a fab shop, just a guy who likes to design and build stuff on the side.
  12. plouth

    88-98 Bucket seat alternatives

    Biggest reason I did not do the newer seats was the seatbelt is intergraded into the seat. With doing something custom like this, I did not want to put the stress on the seat bracket. FYI the seatbelts in OBS trucks match the new seatbelt mounts on the new seats perfect, they clip right in.
  13. plouth

    88-98 Bucket seat alternatives

    I would not worry about the bolt holes, and look for a seat that has a simple bolt in track mount to save time. If your not a guy thats big on fab time i would suggest a call to Corbeau seats they sell the direct fit bolt on seat brackets. Saves time getting the seats level, and they are...
  14. plouth

    88-98 Bucket seat alternatives

    So far the seats have been great, I'm 6'2 and 190 with a waist of 33inch. Holds perfect and is comfortable also the bolster is not as big as a race seat so getting in and out has been fine even with my truck as lifted as much as mine is. The heated seats also tied into my remote start as also...
  15. plouth

    Pre-Runner Tire mount and fab tailgate plates

    fully locks, has a hole through the shaft so it can't be removed.
  16. plouth

    Pre-Runner Tire mount and fab tailgate plates

    Did some work this weekend and mounted the N-Fab tire mount (tire is a 37 cooper) and also made up some corner tailgate plates to complete the look. Wanted to not worry about using the front of the box and having **** slide out while driving. Next up I'm making up some custom bed rails and...
  17. plouth

    The Center Console Thread

  18. plouth

    The Center Console Thread

    Wanted a more upscale center console to match my interior. Looked all over and really didn't want the 2000 and up Chevy version. Came across a console out of a 2015 Infinity QX80, the high end SUV. Turns out that the console can be removed from the Infinity and it fits perfect between my Camaro...
  19. plouth

    overhead console in standard cab

    thanks looked all over there and could not find the standard cab info I was looking for.
  20. plouth

    overhead console in standard cab

    so did you break off the tabs in the back of the console and just sheet metal screw into the roof? Trying to figure out if there are tab holes in the standard cab roof like a tahoe or sub. Reason I asked for the pictures is I just wondered in the inner panel is the entire roof or just the...
  21. plouth

    overhead console in standard cab

    Questions folks. I just bought an overhead console out of a Tahoe and I want to install in my 97 standard cab. Wondering if anyone can upload a picture of their standard cab without the headliner. Don't want to take one down, but would like to know what I'm drilling into. Any info on the steps...
  22. plouth

    Finally got the KC Pro6 lights on the stepside

    the cool thing is the bolts between each light allow you to add more lights, or curve the light bar. I like mine straight, but its ability to curve is cool. Way brighter then my old led, and to be honest the (no glare hood) is fantastic! Not cheap, but a Rigid light is $1300 so it's in the area...
  23. plouth

    88-98 Bucket seat alternatives

    Created a thread already, but thought I would post here so it's listed. Just finished installing 2010-2015 Camaro SS seats. Fits well even in standard cab, so crewcabs will work great. Cut down the seat mounts, and welded steel bars for mounting the seat to the rails. The positive and negative...
  24. plouth

    Finally got the KC Pro6 lights on the stepside

    Took some time to get, was backordered for three months. But WOW was the wait worth it, these are some high quality lights, and the engineering is off the hook. Lights up so much more then the old led bar, and ZERO I said ZERO hood glare!! Now I know these are not cheap...the China bars are...
  25. plouth

    2010-2015 Camaro Seats in OBS Standard Cab

    Think the truck is coming along. Here is a pick of the outside, the seats match up pretty well to the theme I'm going for.

Latest posts

Members online

Total: 1,512 (members: 40, guests: 1,472)

Forum statistics

Threads
64,336
Messages
1,391,508
Members
51,441
Latest member
omcvay

Share this page

Top