Search results

  1. R

    2500 OBS to NBS Hub swap

    I seems FullSizeChevy and Vortec454 are gone. I don’t have the details anymore around doing the hub swap. I have the 2002 no-HD front hubs but now no instructions. Anyone know where to find them?
  2. R

    Steering column cover

    I’m having trouble finding the replacement upper and lower steering column cover. Anyone know where to get them or have ideas on different options? Maybe the gmt600 covers fit?
  3. R

    96 K3500 454 coolant temp sensor

    On my 96k3500 with the Vortec 454 is has a 1 wire coolant temp sensor on the driver and passenger side of the engine. Where done the passenger side sensor connect to? There have been a few owners of my truck and it seems that last owner did reconnect the passenger side sensor and cut the wire...
  4. R

    Temp sensor vs sender

    I’m needing to replace the 1wire temp sender on my 96 7.4l. The sender is a $25-$35 part. But a 2wire temp sensor is a $6 part. Is there a way to make that work? Sent from my iPhone using Tapatalk
  5. R

    Lower manifold gasket

    Looking for the right part on summitracing.com for the lower manifold gasket that is steal and rubber coated. The previous one was plastic/composite with the rubber ring material inside blew out. I need one that can handle the boost of a blower. Sent from my iPhone using Tapatalk
  6. R

    ARP stud kit

    Looking for ARP kits or similar. Wanting to do heads, exhaust, upper&lower intake manifold kits. I’ll be running a Whipple 2.3L super charger. Sent from my iPhone using Tapatalk
  7. R

    Valve Spring for stock 454 heads

    Pulled my heads due to replace the head gasket and discovered a broken valve spring. Im running a 2.3L whipple with larger injectors and tuned. Not sure of the HP but it seems i might wanna get better springs. Any recommendations?
  8. R

    Head options

    What do y’all recommend for replacements heads, just took mine off due to a blown head gasket. Before I bother with getting them rebuilt, looking for recommendations. 96 K3500 with a 2.3L Whipple and a Vortec 454. Sent from my iPhone using Tapatalk
  9. R

    96k3500 delayed start

    I have a 1996 Chevy K3500 with the Vortec 7.4l and I’m having an issue starting the truck. It’s been sitting for awhile but the battery is good. When I put the key to start the truck, it will not crank. And as you can see in the picture, the night for the gear selector goes away. After about...
  10. R

    2.3L Whipple. Newly rebuilt and come ready to run

    Due to popular demand, I’ll sell the Whipple only. This will come with everything need to bolt on the Whipple and get running brackets, pulleys, ecu, etc... Send me a DM if your interested. Id like to get $5k as this was just rebuilt and upgraded from a 1.6 to a 2.3L. But open to offers. Sent...
  11. R

    Will this 502 fit my truck

    Looking at this 502 for my truck. I blew a head gasket. Figured I’d look at upgrading before rebuilding. I hoping this will fit my truck, intake with Whipple, and long tube headers. Please let me know. https://m.facebook.com/marketplace/item/872722843110024/?ref=messenger_banner Sent from...
  12. R

    Engine tranny swap from 2000 TopKick

    I saw on Facebook today, a 7.4L with the CNP setup and an Allison transmission from a 2000 TopKick 7500 for sale. Would this be a difficult swap if they are providing all the harnesses, ecu, etc? Sent from my iPhone using Tapatalk
  13. R

    Multiple ShiftLock relearns

    I have a 1996 Chevy K3500 7.4l and automatic trans. After performing a successful shiftlock relearn using the 10run position 1min in the off position 3times, my ShiftLock Relearn seemed to be successful but after 3days, it needed it again. What are the next steps to diagnose the issues here...
  14. R

    No start and no shift indicator

    I have already replaced the neutral safety switch. When I turn my truck to run the shift indicator disappears and the truck won’t start. If I keep the key in ACC and shift through the gears, the indicator displays correctly. However, in the run position, it doesn’t seems to work at all...
  15. R

    Selling complete vortec 7.4L 454 and 2.3L whipple

    For sale is a Vortec 7.4L 454 and I freshly rebuilt 2.3L whipple supercharger. The motor had 126k miles and the rebuild whipple hasn’t been installed yet. This package comes with the complete motor, supercharger and ecu which is already tuned. Asking $6k. Sent from my iPhone using Tapatalk
  16. R

    Selling complete vortec 7.5L 454 and 2.3L whipple

    For sale is a Vortec 7.4L 454 and I freshly rebuilt 2.3L whipple supercharger. The motor had 126k miles and the rebuild whipple hasn’t been installed yet. This package comes with the complete motor, supercharger and ecu which is already tuned. Asking $6k. Sent from my iPhone using Tapatalk
  17. R

    Selling complete vortec 7.5L 454 and 2.3L whipple

    For sale is a Vortec 7.4L 454 and I freshly rebuilt 2.3L whipple supercharger. The motor had 126k miles and the rebuild whipple hasn’t been installed yet. This package comes with the complete motor, supercharger and ecu which is already tuned. Asking $6k. Sent from my iPhone using Tapatalk
  18. R

    Port/Polish machining of my intake

    I’m sending my Whipple off to Jon Bond performance to get a conversation from a 1.6L to a 2.3L. I have a 96 K3500 CCLB with a 7.4L 454 gas motor. While the truck is apart, what do y’all think about me doing a port and polish on my upper and lower intake manifold? Also a little bit of machining...
  19. R

    OEM complete steering wheel assembly

    I am looking to replace my complete steering wheel assembly for my 1996 K3500 CCLB. Including shift lever, blinker lever, basically everything down to the firewall. Any ideas on where to get one. Prefer new or in like new condition. Sent from my iPhone using Tapatalk
  20. R

    Front SwayBar disconnects

    Does anyone have a recommendation for some front swaybar disconnects? Sent from my iPhone using Tapatalk
  21. R

    Traction bar setup

    I was recent t-boned in my truck. I got minimal damage thanks to by bedliner paint job. Just a bent traction bar. Before I replace it i wanted to get the alignment checked to make sure nothing else was out. My question is, can I just removed the 1 bent traction bar and leave the other one on...
  22. R

    Wheel to wheel steps

    Not sure if this is the right area but I have a 96 crew cab long bed and I’m looking for some wheel to wheel nerf bars/ side steps. Is anyone running these. Sent from my iPhone using Tapatalk
  23. R

    Driveshafts for 12v Cummins swap

    Hey y’all. I’m gonna be doing a Cummins swap soon and I plan to use my 4l80 since it’s already been rebuilt. My question is, do I re-use the same drive shafts after I mount the transmission and transfer case to the Cummins? The reason I ask is because my drive shaft is currently worn out and I...
  24. R

    Ream tool for obs to nbs

    I picked up a set of 2001 non-HD knuckles, arms, axles, the whole package. All I need to know is what tool do I need to ream the knuckle for my obs upper a-arm ball joint to fit into the nbs knuckle? Sent from my iPhone using Tapatalk
  25. R

    Engine stumbles from stop

    I been having an issue where once my truck is warmed up, the engine will stumble when I begin a lite acceleration from a complete stop. I have brand new NGK plug, new wires, new MSD StreetFire Distributor with cap and rotor. I can’t seem to figure this out. Sent from my iPhone using Tapatalk

Latest posts

Staff online

Members online

... and 6 more.
Total: 1,578 (members: 56, guests: 1,522)

Forum statistics

Threads
64,246
Messages
1,389,698
Members
51,232
Latest member
Jmf07

Share this page

Top