Search results
-
GMT400 You can't quit looking at!
I know my GMT400 brethren will appreciate this and I had to show someone. Cleanest untouched 2 door hoe I've seen in a long time, there was so much untapped potential it was ridiculous, if funds allowed I would of tried to stop them to buy it.- Butch
- Post #1,796
- Forum: Car / Truck Photos and Videos
-
LBZ SWAP?
It would be harder than any LS swap but extremely worth it. The lbs is a great base to work off of but I highly recommend getting an entire truck and also doing a complete dash swap as well since the engine controls are blended with body controls like a/c. A 12 valve is almost easier than an ls...- Butch
- Post #23
- Forum: Engine Performance + Maintenance
-
Butch's LS Swap Build Thread
Ended up going back to work sooner than expected so the project has again been postponed, be sure to check for updates close to May :crazy:- Butch
- Post #16
- Forum: LSX + Carb Swaps
-
Butch's LS Swap Build Thread
Whats the specs on it all? motor, cam, converter, tranny?- Butch
- Post #12
- Forum: LSX + Carb Swaps
-
Butch's LS Swap Build Thread
I think i have projectitise or something, after this trucks done I'll start building up the LQ4 for the airboat and then the project that I've really been wanting to start on, 4 door S10 that is in desperate need of a BBC, one tons and flatbed. I guess I can just chalk it up to being a gear...- Butch
- Post #10
- Forum: LSX + Carb Swaps
-
Butch's LS Swap Build Thread
Lack of time and funds, I only have a few more weeks off before I have to go back to work (7/12s for a few months) and I want this truck back up and running to use as my daily driver and keep the miles off of the DMax, and I want to see what it'll be like stock for stock compared to the old L31...- Butch
- Post #6
- Forum: LSX + Carb Swaps
-
GMT 400 Hydroboost swap
Mike already has a thread with some part #s, its in the stickys http://www.gmt400.com/forum/showthread.php?11821-1500-Hydroboost-Conversion-Part-Numbers- Butch
- Post #15
- Forum: Axles + Brakes
-
Butch's LS Swap Build Thread
Well its time for the old and leaky 350 to be pulled. I have most of my parts gathered up and ready to go, including but not limited to.... -2002 5.3L -Dirty Dingo Motor mounts -JEGs crankshaft spacer -0411 PCM -'05 truck fans Motor will be pulled today and major engine bay cleaning...- Butch
- Thread
- Replies: 15
- Forum: LSX + Carb Swaps
-
New Years Update
To Update an update, I'm the new and extremely proud owner of this..... '06 D-Max 6" Fabtech and is completely stock other than that at 80k miles, fully loaded SLT interior. I can't believe I did and love that I did.- Butch
- Post #20
- Forum: Member Trucks
-
Long crank 6.0l to 4l60e
Your 60e will work, with any LS, just the flywheel and a spacer will make up the difference.- Butch
- Post #2
- Forum: LSX + Carb Swaps
-
MPFI Conversion???
That IMO 9 times out of 10 is sticking poppets with the CPFI spider, after the swap you still need to stay on top of changing fuel filters and I like to throw in half a can of seafoam through the tank once a month to try and keep things cleaned up. Its not hard to do just time consuming and IMO...- Butch
- Post #7
- Forum: Engine Performance + Maintenance
-
New Years Update
The Maxima T-Boned me in the passenger side as I was pulling in to McDonalds, the Lincoln was trying to pull out of McD's onto the highway and was just in the wrong place at the wrong time. Traffic was pretty heavy and I took the first chance I saw to come across the highway and a BMW on the...- Butch
- Post #17
- Forum: Member Trucks
-
New Years Update
March Update... Homestead is a **** hole, oh well time for a DMax...- Butch
- Post #14
- Forum: Member Trucks
-
Why so many 400s leaving?
I need reliability and driving trucks that are 14+ years old and over 200k miles is kind of like Russian roulette and in my kind of work that just doesn't cut it. I put 10k miles on the Yukon in the past 2 months and it was going very strong put you never know about the little things, especially...- Butch
- Post #98
- Forum: Member Trucks
-
96 chevy rcsb LS1 for sale..
Do want! Wish you were selling in a few months and not now! -
-
New Years Update
Those wheels are pacers but yes identical to MT Classic IIs. I like them on there just don't like the BL that much but I can live with that. Entire truck is super clean for a 200xxx mile truck and I'm really starting to like the amount of space I have in the back.- Butch
- Post #13
- Forum: Member Trucks
-
New Years Update
As some of y'all know I got some new front end pieces and a RCX lift for my truck but between working and the motor using a good bit of coolant I decided it was time to find a backup vehicle. I don't have as much as I wanted for a down payment on a duramax but a family friend decided it was time...- Butch
- Thread
- Replies: 28
- Forum: Member Trucks
-
-
6L80E-HD thread
At one time there was a rumor of GM putting out a Standalone for the 6L80e in Spring of '12 but I haven't heard anything about it in a while.- Butch
- Post #5
- Forum: Transmissions
-
GMT400 You can't quit looking at!
I don't think so, I don't recall ever seeing him on here.- Butch
- Post #1,071
- Forum: Car / Truck Photos and Videos
-
Central Florida Members
where about in Cen Fla? there's a lot of custom shops here. -
Rough Country Lift - Scratch and Dent
that got put on hold till im done down here in okeechobee- Butch
- Post #18
- Forum: Ebay / Craigslist Finds
-
Rough Country Lift - Scratch and Dent
yeah but it won't be on the truck for a while, i still have a lot of other chickens to choke first unfortunately- Butch
- Post #13
- Forum: Ebay / Craigslist Finds
-
