Search results

  1. deadbeat

    RockAuto Code

    225652932202941372
  2. deadbeat

    Deadbeats 1997 Centurion Conversion

    Got the transmission in, everything works except I now can't see what gear I am in. This did work before before I pulled the transmission, I assume I have a bad wire at the neutral safety switch?
  3. deadbeat

    Deadbeats 1997 Centurion Conversion

    I didn't see the little two wire plug on the bottom of the shift motor and pulled my wires out of the plug. There are 2 wires, red and black. Does anyone know which way they go?
  4. deadbeat

    Deadbeats 1997 Centurion Conversion

    Yeah, and i can cut the factory weld and put the 1/2 ton front back on and it will be just like it would have been from the factory, no patching or scabbing.
  5. deadbeat

    Deadbeats 1997 Centurion Conversion

    No, its gonna 6 lug. I do have a crew cab short bed frame from a 3/4 ton 1999 model. I will remove the boxed front and install a 1/2 ton front back on it. We did that on dads truck several years ago it worked/works perfect. A side benefit is the 3/4 ton one is 5/16 inch thick, so it should last...
  6. deadbeat

    Deadbeats 1997 Centurion Conversion

    Well, I learned the hard way you can't put a torque convertor in without removing the transfer case from the transmission, very close but just not enough room. Getting ready to stick a new frame under this truck, mine is getting in bad shape where it was stretched.
  7. deadbeat

    RockAuto Code

    Here is one i just used that works. 249331811212288178
  8. deadbeat

    Fan wont blow on high.

    I've fixed a few that wouldn't run on high, usually something simple if you can use a test light. The hardest one I fixed had a fusable link or something in the red wire that had corroded and broke along the firewall, thus not letting the relay ever get power.
  9. deadbeat

    Front Tan Leather Seats

    Here is a pic of them in my truck.
  10. deadbeat

    Front Tan Leather Seats

    I took my front seats out of my truck and want to sell them, they are nearly perfect, I'll post some pics later. I put some caddy escalade seats in because they have a taller back and feel better. I'll try to post some pics later, I'd like 300 and they need picked up in Kentucky. I had them...
  11. deadbeat

    I have a 1999 k1500 breaks locked up wont relese

    99 is the first year of the gmt800 for the 1500 series trucks, seems like an easy year to mess up and get the wrong part for.
  12. deadbeat

    Driveshaft Balance 93 GMC Sierra extended cab 4x4

    You can wrap a couple thick orange gloves around the transfer case output and tie it very well, and put it in 4x4 and drive it some. That was how we eliminated the front parts from being the vibration in my dads truck. With the rear section out, his drove very smooth, then with the rear in, it...
  13. deadbeat

    Nickle-Copper brake tubing (Making flares)

    I messed up a few when I first used NiCop by over tightening them. You can even leave them slightly looking like a double flare and where the material is soft, tightening them up with finish the flare for you. Not sure, but a mechanic down the road told me he bubble flares them all and lets the...
  14. deadbeat

    4X4 dash switch intermittent.

    And, I just opened up my old one and see cracks in the solder where the pins go down for the plug, likely all that was wrong with it as @east302 said.
  15. deadbeat

    4X4 dash switch intermittent.

    Mine did the same thing, you could push around and hold when the light came on and it would switch. I tried dielectric grease and it didn't help, finally just put a new switch in and it works great now for the last 6 months or so.
  16. deadbeat

    Blend door actuator....

    Mine was doing that exact thing the other day, take the actuator off and move the linkage by hand to make sure it moves free. If it does, check for power on the brown wire going to the actuator, if you have power there replace the actuator. If you move the linkage by hand and it doesn't change...
  17. deadbeat

    AC defrost all the time

    Changed the mode door blend motor, now it is working correct. I guess, if you air is stuck on either floor, defrost, or vent, this is where to start. I had power to it and I could move the levers easy with the motor off, the motor was locked up in the actuator.
  18. deadbeat

    AC defrost all the time

    Ok, brown wire has power down to actuator, how do I check the actuator itself?
  19. deadbeat

    AC defrost all the time

    I think if I could find how to check the wires coming into the controls and where they come from I might be able to figure this out.
  20. deadbeat

    AC defrost all the time

    Looking at the diagram, I guess I need to verify power on the brown wire.
  21. deadbeat

    AC defrost all the time

    I don't think this is the same problem, when that happens it will come out other vents too and you can hear and see the actuators move. I put a new defroster door on it a few years ago when it did that.
  22. deadbeat

    AC defrost all the time

    I am having a little trouble with the 1997 k1500 air, it only blows defrost no matter what setting you have, and nothing comes out any other vents. I changed the hear control panel with a known good used one out of dads truck, it did nothing. I have checked the fuses but it seems there is no...
  23. deadbeat

    What plug is this? 1988 C1500 Sierra 2wd

    I have to admit I haven't worked on that model truck in a long time, but that looks like the plug where the harness goes into the cab.
  24. deadbeat

    GMT 400 Hydroboost swap

    I never did get a solid pedal with the vehicle not running, but really good brakes once I turn it on. As soon as it starts, it pushes the pedal up solid and it doesn't go down far at all to stop. I did change the master to a nm3011 instead of one for a 1 ton diesel. Question is, could part of...
  25. deadbeat

    Deadbeats 1997 Centurion Conversion

    Newer Dodge.
Top