Search results

  1. E

    4L80E fluid quantity.

    Pinger is correct as to what my intension was.
  2. E

    4L80E fluid quantity.

    the fluid looks good, but i replaced it on december. the dipstick always read too low, and i can't drive 16 miles as the book says everytime i want to check the level. so i thought i'd drain it again, fill the book quantity and see immediately what the dipstick reads when the car is off and...
  3. E

    4L80E fluid quantity.

    What do you mean by “note the correction made there…”?
  4. E

    4L80E fluid quantity.

    it’s hard to tell by the dipstick, that’s why i wanted to drain it and fill the appropriate quantity and see what the dipstick says ( i changed the fluid 9 months ago and the dipstick always showed a low level) It’s 95 but who knows if the tranny wasn’t replaced. does it look shallow or deep?
  5. E

    4L80E fluid quantity.

    i removed the pan in mine and only 4qts or so came out.
  6. E

    Advice about fan clutch

    Yes it’s 8 lug.
  7. E

    Advice about fan clutch

    Hello I got from the local dealer these part numbers according to the vin. He can’t tell the difference between them. My car is 95 suburban k2500 8600gw with a/c and 4.10 rear axle. Does it take a standard duty or heavy duty clutch? And what are the 2 letters codes? Thanks
  8. E

    part out, 91 c1500

    i need the alternator crescent moon bracket and braces.
  9. E

    Electric fan set up?

    what fan do you have?
  10. E

    Simple Mark VIII Electric fan install

    how do your alternators cope with it?
  11. E

    The best electric fan install with a trinary switch

    how do you connect the ecm to control the fans? and did you upgrade the alternator?
  12. E

    alternator mounting

    hello got me a 124amp GM alternator to replace my current one which is probably an after market. 124 is what i need cos my car is 8A3. i saw in the parts diagram all those braces for this alternator which none exits now in my car, they were probably thrown away. are all of them needed or are...
  13. E

    ULTIMATE TBI mods stage 1

    what's preferred- removing the air cleaner spacer or replacing it with the cereal bowl spacer?
  14. E

    1996 c1500 pitman arm

    this is for removing the arm from the box or from the linkage?
  15. E

    1996 c1500 pitman arm

    you shouldn't have hammer on it.
  16. E

    1996 c1500 pitman arm

    On k models no tool works but this one, due to limited space. On c models maybe you can use something else. And the tool near the cat is for removing the pitman from the steering gear.
  17. E

    torsion bars direction

    they are correct for R and L. question is if the end that's now in the LCA shouldn't be on the cross-member side. if the arrow indicates the direction the bar releases after the tension is relieved then they are flipped over indeed.
  18. E

    torsion bars direction

    looking for pictures of your torsion bars front ends through the lcas. after reading here someone's post i can't let go the thinking that mine are flipped over and the front ends were installed on the cross-member and vice versa.
  19. E

    OBS Camber/Caster Knock-outs - how to tell if you have them.

    I bought an adjusting kit but the nuts aren’t self lock or prevailing torque. Is it safe to use them?
  20. E

    95 part out

    i sent you a pm
  21. E

    help with filling power steering fluid

    how does it sound to remove the belt and turn the pump with a drill?
  22. E

    help with filling power steering fluid

    after changing pitman arm seals i wanted to fill and change the power steering fluid. did like in the movies- disconnected the return hose and turned the steering from side to side until me arms almost broke, but not a single drop went out of the return hose, and the fluid level in the reservoir...
Top