Search results

  1. zachary A makoff

    '96 1500: new door latch - reliable source?

    i got mine from carparts.com. Where did you get the door rods or is lmc the only place able to get them
  2. zachary A makoff

    transmission grinding and not moving

    and 1998 k1500 with built 350 sbc vortec
  3. zachary A makoff

    transmission grinding and not moving

    4x4 4l60e with np241c transfer case and when it grinding I can hear it coming from the tranny.
  4. zachary A makoff

    transmission grinding and not moving

    I just installed my new motor and I put it into reverse and moved 10 feet then it stopped and then I put it into drive and it started grinding. When I shift it into gear with the coloum it grinds in every gear as well as it won't go into park with the column, I have to go underneath and push it...
  5. zachary A makoff

    binding starter

    the main ground wire from the batter to the front of the motor was kinda crusty so I changed that and cleaned the starter mounting surface so it has a good ground. I also think my flex plate is binding on the torque converter so I'm going to try and shim it out a little bit and see if that helps.
  6. zachary A makoff

    binding starter

    I just finished rebuilding my motor and the start clicks then stops and I lose all power. When I unbolt the starter and try it, it spins fine. I took all the plugs out and the belt. the starter is a year old and doesn't have much run time as my motor blew shortly after I replaced it. Any tips?
  7. zachary A makoff

    Advice needed

    I had the same problem with my turn signals. Turned out some rats ate the head light harness. Easy to replace just go to a junk yard or eBay
  8. zachary A makoff

    ls1 5.7 vs 5.3 swap

    It's a rebuilt 4l60e for a 96-98 5.7. It got a 2 piece case so it's not an early model
  9. zachary A makoff

    ls1 5.7 vs 5.3 swap

    do i need to get a crankshaft spacer for the ls1 i just put a new transmission and I would like to keep it
  10. zachary A makoff

    ls1 5.7 vs 5.3 swap

    okay so the ls1. how stout could is it. I'm thinking 400hp to crank. its gonna be a daily driver that I take offroading occasionally. what are the weak links of it
  11. zachary A makoff

    ls1 5.7 vs 5.3 swap

    price doesn't matter as I'm doing work for him and he is paying me a motor
  12. zachary A makoff

    ls1 5.7 vs 5.3 swap

    I'm swapping a new motor into my 98 k1500 as the stock 5.7 Vortec started knocking right after I was done putting a new tranny in and I'm at a crossroads. I have access to two motors. One is an aluminum block 5.3 and the other is a 5.7 ls1. I don't know which one to get so I could really use...
  13. zachary A makoff

    LS swap

    I replaced my transmission and started it up and it started knocking so I was going to rebuild my 350 4 bolt with 906 heads and after adding the numbers with the stoker kit valve train and everything it was 2600 before machining so I decided to just do a 5.3 ls swap. I don't know anything and I...
  14. zachary A makoff

    383 build questions

    What do you mean to mess around with it. I was planning on getting it 0411 swap it
  15. zachary A makoff

    383 build questions

    https://www.compcams.com/ultra-pro-magnum153-roller-rocker-arms-chevy-3-8-stud-152-ratio-1-cpg.html I found these for the rockerarms. Are they any good
  16. zachary A makoff

    383 build questions

    I have a 350 Vortec with a 4 bolt main and 906 cylinder heads. It recently started to knock so I got it all apart and decided to rebuild it as a 383 stroker. My question is what kits should I use for it. I was thinking about using this on for the rotating assembly...
  17. zachary A makoff

    NP241C rebuild

    i got it rebuilt but the shifting linkage is binding and super stiff any ideas.
  18. zachary A makoff

    NP241C rebuild

    I am getting my transmission rebuilt and while it's out I figured to rebuild the transfer case myself. Where should I go to buy the rebuild kit and is there a schematic of how it goes together?
  19. zachary A makoff

    NP241 oil

    My np241 was also leaking from the rear output seal as well. how do you exactly replace it?
Top