matttahoe53
I'm Awesome
The roof mounted speakers of the suvs.
The Stupid Electronics Questions Thread
- Thread starter Mike
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
These are the newest version of the Kicker KS series 4x10s that I usually recommend to people looking for good replacements for that location.
https://www.amazon.com/Kicker-KSC41004-KSC4100-Speakers-tweeters/dp/B01NBT3TZY
Curt
Sometimes when I close my eyes, I can't see.
X2
The Kicker KS series speakers are amazing! They don't have that great of bass (I don't care about that), but it is a huge improvement over stock. When installing my Kicker KS speakers, I had to drill new holes for them in the roof mounted ones and the front doors. The rear doors fit like a glove in the stock mounting location.
Sent from my iPhone using Tapatalk
matttahoe53
I'm Awesome
Do you remember which colors were the power and ground for the 4x10s? I can't seem to find the answer online and I haven't got in there yet.
Curt
Sometimes when I close my eyes, I can't see.
It's been a while since I've installed them, but it was pretty straightforward with black being ground and the other color being power. I took a picture of the wiring from afar, although I doubt it will be much help I'll post it anyways.
You must be registered for see images attach
Also, Metra makes adapters for the door speakers (the roof mounted ones are a different plug) to retain your wire harness. It is the Metra 72-4568 https://www.amazon.com/dp/B0002BEUZ8/ref=cm_sw_r_cp_api_v0ZIzbESE0V81
Sent from my iPhone using Tapatalk
Last edited:
Boom!
https://www.amazon.com/Metra-72-4568-Speaker-Selected-Vehicles/dp/B0002BEUZ8
Metra 72-4568. Works for the front and rear door speakers. I was surprised that there wasn't a similar plug on the rear 4x10s when I did mine.
Curt
Sometimes when I close my eyes, I can't see.
Thanks df2x4! I was also very surprised when I removed the factory 4x10 and saw a different plug. IIRC it looked like this: https://www.amazon.com/dp/B019HHOOB2/ref=cm_sw_r_cp_api_36ZIzb5JEWNSA
Sent from my iPhone using Tapatalk
No problem! Yeah that looks about right to me.
GarrettGmc
I'm Awesome
Couldn't find this anywhere so hopefully someone knows and can help me out. Have a wiring harness going into the cab on my 94 c1500 5.7 passenger side just under the overflow tank and next to some of the heater hoses. I unscrewed the connection from the firewall but can't tell if it's supposed to disconnect or not.
You must be registered for see images attach
83GMCK2500
I'm Awesome
- Joined
- Apr 11, 2013
- Messages
- 505
- Reaction score
- 209
Nope, that one does not disconnect. If you're careful you can lift the tabs and separate those two halves, but you will find the wires all encased in a block of resin. The two halves of that pass-through unit are the molds/retainer for it.
Similar threads
Staff online
-
df2x44L60E Destroyer
Members online
- ae716
- Orpedcrow
- Nephrodoc
- chadda989
- CumminsFever
- GoToGuy
- davidrifa
- Arthurius
- g00se
- Metalcorpse
- L31MaxExpress
- johnckhall
- 95Noobie
- OffroadZ71
- Komet
- torhne
- DAWJ
- vince72
- 1998_K1500_Sub
- Thatlowchevy
- bwilson6914texas
- v8wxd
- BOOT
- Dave69
- Keeper
- backfire bomb
- Elmo
- 1996bluegreychevy
- Dravec
- Shane B
- mharris24
- M5847
- keelow
- 99xcss4
- Suzukin92
- jimflint
- df2x4
- Green1998
- LOOPYDavid
- JPVortex
- 0xDEADBEEF
- GrimsterGMC
- caw_86
- strikk
- Caman96
- Supercharged111
- TechNova
- Bobby Zablocki
- FNolen13
- Gingertwunt