Upper corner lights

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

1500z71

I'm Awesome
Joined
Jan 16, 2015
Messages
652
Reaction score
300
Location
North AL
Has anyone ever done this with these types of corners?

You must be registered for see images attach
 

Sampuppy1

Diesel nut
Joined
Mar 26, 2013
Messages
10,856
Reaction score
1,223
Location
West MI
My smoked lenses and chrome reflector ones I did. Didn't turn out too bad.

Sent from my XT1254 using Tapatalk
 

1500z71

I'm Awesome
Joined
Jan 16, 2015
Messages
652
Reaction score
300
Location
North AL
My smoked lenses and chrome reflector ones I did. Didn't turn out too bad.

Sent from my XT1254 using Tapatalk
Sweet. Now if I'm reading correctly, the top and bottom corners will both flash? Also more importantly, do you have to tap into the parking lights on each respective side in the same way?
 

Sampuppy1

Diesel nut
Joined
Mar 26, 2013
Messages
10,856
Reaction score
1,223
Location
West MI
When I did mine I wired the corners together. So the lower ones flash and the corners are on the alternate flash. I also have 6000k HIDs so I put white LEDs in the upper corners. Three whites across the top and three Ambers on the bottom.

Sent from my XT1254 using Tapatalk
 

Joeyk94

I'm Awesome
Joined
Dec 7, 2013
Messages
224
Reaction score
239
Location
Whittier California
Has anyone ever done this with these types of corners?

You must be registered for see images attach
I did headlights corners and turns are all led too
You must be registered for see images attach
You must be registered for see images attach


Sent from my SM-G900T using Tapatalk
 

1500z71

I'm Awesome
Joined
Jan 16, 2015
Messages
652
Reaction score
300
Location
North AL
I did headlights corners and turns are all led too
You must be registered for see images attach
You must be registered for see images attach


Sent from my SM-G900T using Tapatalk
Those look damn good. That's it I'm doing it. Did you do yours by just drilling a hole for the bulb or did you epoxy a socket into the corner lense? That's kinda the jist I'm getting from this thread, is that those are the two ways to do it.
 

Joeyk94

I'm Awesome
Joined
Dec 7, 2013
Messages
224
Reaction score
239
Location
Whittier California
Those look damn good. That's it I'm doing it. Did you do yours by just drilling a hole for the bulb or did you epoxy a socket into the corner lense? That's kinda the jist I'm getting from this thread, is that those are the two ways to do it.
Thankyou
I had just the hole for a long time with a metal clip holding it but they always leaked water inside. So I cut the socket out stock corner and epoxy it to not the corner it self but the grill. So all four corners are twist sockets

Sent from my SM-G900T using Tapatalk
 

Sampuppy1

Diesel nut
Joined
Mar 26, 2013
Messages
10,856
Reaction score
1,223
Location
West MI
Those look damn good. That's it I'm doing it. Did you do yours by just drilling a hole for the bulb or did you epoxy a socket into the corner lense? That's kinda the jist I'm getting from this thread, is that those are the two ways to do it.
I installed one of the sockets risers from a set of chrome clear corners a guy sent me. Clearance is tight. I like the idea of putting the socket riser on the grille. Only problem I can see is lack of sealing between the corner light itself and the grille. I can see moisture getting in real easy unless you use a thick rubber seal but that seems just thrown together. Up to you how you choose to do it.

Sent from my XT1254 using Tapatalk
 
Top