454cid
Sooper Pooper
There's a few part numbers for 11 blade fans. I've got a thread on it from when I did that upgrade.
4.3L to ?? swap.
- Thread starter DeCaff2007
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
DeCaff2007
I'm Awesome
Oh yeah? Care to share a link?
454cid
Sooper Pooper
I'd have to search for it and I'm at work.
I imagine you're going to have to disassemble the transmission to get to the backside of the bellhousing and get that pin out. Also, is that a crack to the right of the stub, or just some casting flash and a shadow?
DeCaff2007
I'm Awesome
AHAHAHA!! I got the btch out!
Ended up having to drill it out, a little bit of Dremeling, and then finally some PB blaster and my trusty DeWalt drill bits.
You must be registered for see images attach
You must be registered for see images attach
Ended up having to drill it out, a little bit of Dremeling, and then finally some PB blaster and my trusty DeWalt drill bits.
DeCaff2007
I'm Awesome
You mean this? That's dirt and the shadow behind it.
You must be registered for see images attach
DeCaff2007
I'm Awesome
These FINALLY came in today. Took them over a week to get here from CA. Total BS.
A fool and his money, however, are soon parted. These are nothing more than aluminum with the paint ground off the top to look like actual fins. At least they came with the hardware. Now, I'm just waiting on paint to dry so I can start putting this damn thing back together.
Oh, and I know there's a difference between the V6 and the V8 motor mounts. Not the clamshells... I mean the metal brackets that mount to the frame. Anyone have pics of those? I have A LOT of parts sandblasted and painted. Some are for V6 and some are for V8. Quite frankly, I've lost track of what's what. A subtle reminder could be helpful.
You must be registered for see images attach
A fool and his money, however, are soon parted. These are nothing more than aluminum with the paint ground off the top to look like actual fins. At least they came with the hardware. Now, I'm just waiting on paint to dry so I can start putting this damn thing back together.
Oh, and I know there's a difference between the V6 and the V8 motor mounts. Not the clamshells... I mean the metal brackets that mount to the frame. Anyone have pics of those? I have A LOT of parts sandblasted and painted. Some are for V6 and some are for V8. Quite frankly, I've lost track of what's what. A subtle reminder could be helpful.
What ELSE would they be?
Every "finned" set of valve covers I've ever seen is made exactly like that.
Reluctanse
I'm Awesome
they look great.
