Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

618 Syndicate

You won't...
Supporting Member
Joined
Sep 17, 2020
Messages
6,600
Reaction score
15,449
Location
Southern Illinois
So, when you power up your ignition, without start, your map sensor should read 98-99, and it shows 129. I can change the map sensor from a 5 bar to a 3 bar and it gets close..... something isn't right though! I thought maybe the efi had the map scaling wrong so I manually built my map with values provided by lowdollar, no luck! It starts and runs, but it's super rich.
I don't know anything about how the Holley stuff works, but is there a setting that tells it what to look for as a point of reference when it powers on?
 

0xDEADBEEF

Supporting Member
Supporting Member
Joined
May 3, 2021
Messages
2,476
Reaction score
6,092
Location
127.0.0.1
So, when you power up your ignition, without start, your map sensor should read 98-99, and it shows 129. I can change the map sensor from a 5 bar to a 3 bar and it gets close..... something isn't right though! I thought maybe the efi had the map scaling wrong so I manually built my map with values provided by lowdollar, no luck! It starts and runs, but it's super rich.

Yeah, mine reads 99 most of the time before I roll the key over.

You can change the scaling in the tune.
 

Wh4t3v3rs

I got real bass!!!!
Supporting Member
Joined
Jun 9, 2020
Messages
1,600
Reaction score
5,172
Location
Kansas
Already did that....
You must be registered for see images attach
 

Wh4t3v3rs

I got real bass!!!!
Supporting Member
Joined
Jun 9, 2020
Messages
1,600
Reaction score
5,172
Location
Kansas
Also, I'm not running CO2, I'm using compressed air and it's not hooked up yet.....
 

Whipped96

I'm Awesome
Joined
Apr 9, 2013
Messages
286
Reaction score
195
Have you verified that the 5 bar map is in fact a 5 bar and you weren’t sent the wrong sensor? I’m running all Low Doller sensors with no problems but I originally had a problem with a fuel pressure sensor, Brandon made it right.
 

Wh4t3v3rs

I got real bass!!!!
Supporting Member
Joined
Jun 9, 2020
Messages
1,600
Reaction score
5,172
Location
Kansas
Have you verified that the 5 bar map is in fact a 5 bar and you weren’t sent the wrong sensor? I’m running all Low Doller sensors with no problems but I originally had a problem with a fuel pressure sensor, Brandon made it right.
I've got 3 of them..... they are all 5 bar and they all act the same way and show the same values. That's why I'm leaning towards software issue.
 

0xDEADBEEF

Supporting Member
Supporting Member
Joined
May 3, 2021
Messages
2,476
Reaction score
6,092
Location
127.0.0.1
What firmware are you using? I had to update mine to get the oil pressure to work.
 
Top